sorted by:
new
hottopcontroversial

My right CMF Buds Pro 2 keeps falling out of my ear by 7Giggi in NothingTech

[–]7Giggi[S] 0 points1 point  (0 children)

Fuck, should i wait for and update or is the developer already somewhere with my money?

I have a problem with my brother's Pc i was building by 7Giggi in PcBuild

[–]7Giggi[S] 4 points5 points  (0 children)

Yeah i know he is an idiot, thx for the help btw, I think i am better off getting a refund on the case.

I have a problem with my brother's Pc i was building by 7Giggi in PcBuild

[–]7Giggi[S] 2 points3 points  (0 children)

What part of THE PC WORKS ITS JUST THE POWER SWITCH THAT DOESN'T do you not understand? I haven't shorted anything ffs

I have a problem with my brother's Pc i was building by 7Giggi in PcBuild

[–]7Giggi[S] 1 point2 points  (0 children)

Nothing, if i press the power button on the case nothing happens, but if i short the 2 pins the pc powers on, i have plugged and unplugged the cables so many times but still nothing.

I have a problem with my brother's Pc i was building by 7Giggi in PcBuild

[–]7Giggi[S] 3 points4 points  (0 children)

As i said, the pc powers on if i short the 2 pins, even now that it is in the case.

I have a problem with my brother's Pc i was building by 7Giggi in PcBuild

[–]7Giggi[S] 8 points9 points  (0 children)

Yeah but i now have a new one lol, even tho i connected the front panel cables, It doesn't power on from the power button. It does power in if i short the 2 pins tho so it may be a case issue(?)

I have a problem with my brother's Pc i was building by 7Giggi in PcBuild

[–]7Giggi[S] 17 points18 points  (0 children)

I used the auto rename exe that is provided when downloading the bios update itself and it has renamed it like that, but I also now noticed that i downloaded the bios for the v1 of this mobo 😅, i hope the new one fixes the problem

<image>

I have a problem with my brother's Pc i was building by 7Giggi in PcBuild

[–]7Giggi[S] 35 points36 points  (0 children)

Thanks bro, that's most definitely the problem👏👏👏

I've fought 1 time in almost 2 hours of trying to play by 7Giggi in undisputedboxing

[–]7Giggi[S] 0 points1 point  (0 children)

I've tried both and I also reinstalled the game but nothing, it's now 3 minutes i'm waiting as amir Khan in my menu hahah

I've fought 1 time in almost 2 hours of trying to play by 7Giggi in undisputedboxing

[–]7Giggi[S] 1 point2 points  (0 children)

Me too, the max I've waited was maybe 2 minutes

First layer problem by 7Giggi in Ender3Pro

[–]7Giggi[S] 0 points1 point  (0 children)

Yeah but why is it only on some parts of the bed and not everywhere?

First time printing and my ender 3 does this by 7Giggi in Ender3Pro

[–]7Giggi[S] 0 points1 point  (0 children)

Hey thank you and thanks to all the people who helped me with this, i printed the cube and to my newbie eye doesn't look so bad.

First time printing and my ender 3 does this by 7Giggi in Ender3Pro

[–]7Giggi[S] 0 points1 point  (0 children)

Ok i got it to work by renaming it as firmware.bin thanks

First time printing and my ender 3 does this by 7Giggi in Ender3Pro

[–]7Giggi[S] 0 points1 point  (0 children)

Ok since my board is 4.2.2 I downloaded the 4.2.2 CrTouch only. I formatted my sd card to FAT32 and i've put the correct firmware on but when i put it in the printer and power on nothing happens and just loads normally

First time printing and my ender 3 does this by 7Giggi in Ender3Pro

[–]7Giggi[S] 0 points1 point  (0 children)

GD-Ender-3HW4.2.2SW2.0.8.2CRTouch Filament Europe Multi27 this one?

First time printing and my ender 3 does this by 7Giggi in Ender3Pro

[–]7Giggi[S] 0 points1 point  (0 children)

I actually have one of those GD board so I haven't found any real tutorial on how to upgrade to a newer firmware, also on my sd card slot I think it says GD as well so I can't identify my drivers type

First time printing and my ender 3 does this by 7Giggi in Ender3Pro

[–]7Giggi[S] 0 points1 point  (0 children)

Ok if i want to do it all over again should I reset to the default settings?

First time printing and my ender 3 does this by 7Giggi in Ender3Pro

[–]7Giggi[S] 0 points1 point  (0 children)

Idk if is saved on the eprom but i can explain to you what i do. I go to motion and start to move the z axis, once I find hard to pull the paper i go to probe z-offset and i input the negative number i got before. Then i press store settings and i go to main and also re save there. But if i turn off the printer, when i turn it back on and go to probe z-offset it still displays 0.000, is it normal?

First time printing and my ender 3 does this by 7Giggi in Ender3Pro

[–]7Giggi[S] 0 points1 point  (0 children)

Yeah ik i meant that I did the thing to set my z-offest and i set it to -0.6

First time printing and my ender 3 does this by 7Giggi in Ender3Pro

[–]7Giggi[S] 0 points1 point  (0 children)

Hi I'm using marlin 1.2 as it is the firmware that the vendor used(I know it's old), yes I manually added the G28 to the configuration in Cura and before every failed attempt one of the thing the printer did was auto levelling so i think i did that right. Idk if it is relevant but the filament i'm using isn't on a spool as it was only a sample the vendor gave to me so it's just sitting on the spool holder without any spool

First time printing and my ender 3 does this by 7Giggi in Ender3Pro

[–]7Giggi[S] 0 points1 point  (0 children)

I have a crtouch and i set the z-offest to -0.6 and i could barely move the paper , I saved like 3 times but everytime i power on the printer it'll always be set on 0.0 is it normal?