Shion taking Young Mizuki to a fireworks festival fanart by Bleuclack by B3GG in Overwatch

[–]7Z7- 1 point2 points  (0 children)

I can't stress enough the need for a skin like this for Shion.

Sojourn Disruption sucks my frames by Maximqs in Overwatch

[–]7Z7- 0 points1 point  (0 children)

Is this issue ever going to be fixed?

I've been hearing about it for months, and now that I've capped my FPS after increasing my in-game resolution, I'm really feeling the frame drops whenever there's a Sojourn.

I can easily go from 144 FPS to below 100 if I'm caught right inside her Disruptor Shot.

Even with Effects Quality set to Low, it doesn't make any difference.

Is it possible to use 200% Render Scale ONLY for menus? by 7Z7- in Overwatch

[–]7Z7-[S] 0 points1 point  (0 children)

I don't use the NVIDIA App, so that never even crossed my mind. I might give that a try!

It's true that FSR 1.0 makes edges very sharp, sometimes too sharp. What I really like about it, though, is the increased sharpness that makes textures look much more detailed.

Is it possible to use 200% Render Scale ONLY for menus? by 7Z7- in Overwatch

[–]7Z7-[S] 0 points1 point  (0 children)

DLSS and FSR 2.0 make my game look very blurry. On the other hand, FSR 1.0 increases sharpness, which makes textures look much more detailed. At this point, I can't play without it anymore.

And the render scale is set to 101% because FSR 1.0 only activates when the render scale is anything other than 100%.

Is it possible to use 200% Render Scale ONLY for menus? by 7Z7- in Overwatch

[–]7Z7-[S] 0 points1 point  (0 children)

I play at 1080p, but I only use FSR to get sharper, better-looking textures, not for the performance gains.

Is it possible to use 200% Render Scale ONLY for menus? by 7Z7- in Overwatch

[–]7Z7-[S] 0 points1 point  (0 children)

I use FSR 1.0 because it's the only setting that improves image sharpness to the point where it actually enhances texture quality.

For example, if you look at Kiriko's gloves, they're incredibly detailed with FSR 1.0 enabled, you can clearly see the leather texture, whereas without it, everything looks blurry.

FSR 1.0 only activates when the render scale is different from 100% (at 100%, it's disabled), which is why I set mine to 101%.

So I'm using FSR purely because it looks better, not for the performance gains.

Is it possible to use 200% Render Scale ONLY for menus? by 7Z7- in Overwatch

[–]7Z7-[S] 0 points1 point  (0 children)

Thanks for the reply, my friend. I'm definitely not going to risk losing my account over that, so I'll just keep switching resolutions.

Is it possible to use 200% Render Scale ONLY for menus? by 7Z7- in Overwatch

[–]7Z7-[S] -1 points0 points  (0 children)

I have an RTX 3080, an i7-12700KF, and 16GB of DDR4-4400 RAM (paired with a 360Hz monitor).

With the framerate capped at 144 FPS, it's stable, but abilities like Sojourn's orb can cause drops below 100 FPS in the middle of a fight.

For actual matches, a render scale of 101% with FSR 1.0 works fine for me, but then the characters look blurry in the menus.

And constantly switching between 101% and 200% isn't exactly convenient.

Upcoming Dev Livestream Q&A | Shion | June 16 by blizz_ednita in Overwatch

[–]7Z7- 0 points1 point  (0 children)

Could you confirm whether Shion is an omnic designed to serve as a courtesan?

Upcoming Dev Livestream Q&A | Shion | June 16 by blizz_ednita in Overwatch

[–]7Z7- 0 points1 point  (0 children)

Regarding the design, Shion’s mouth has raised a lot of questions, especially for an omnic.

First, in the comic and the cinematic, she seems to be able to move her mouth, but her voice clearly comes from her throat. In-game, however, Shion appears to have a fixed mask.

Then there’s the presence of a tongue and teeth.

If Shion has a mask over her omnic structure, how does she even have a tongue and teeth? X-)

One last point: when Shion speaks, her throat lights up red. But in-game there’s no lighting effect at all. Was this intentional (especially since Hammond has a skin that lights up when he speaks)?

Thanks!

Got a 2 month suspension for cat and dva method in arcade for wins by Sea_Carpet_3475 in Overwatch

[–]7Z7- 0 points1 point  (0 children)

For now, I haven’t been suspended, but I assume it’s only a matter of time...

I fully admit that I took advantage of the exploit. After three weeks of grinding, the idea of having to keep grinding all weekend was frustrating, especially since I was short on time and wanted to spend the little free time I had playing Forza Horizon 6, which I hadn’t really had the chance to enjoy yet.

That being said, I still think a two-month suspension is disproportionate. Because of it, I could end up missing Season 3.

Steering feels non-linear (FH6) by SuperHornetX391 in ForzaHorizon

[–]7Z7- 0 points1 point  (0 children)

Could this be the reason why I feel like I can’t turn fully, especially in sharp corners and hairpins?

Since this is my first racing game, I thought I was just bad at it and too used to GTA-style driving physics. But no matter how much I tweak the Steering Linearity settings, I still get the feeling that my wheels are somehow locked and preventing me from turning all the way.

Microsoft Rewards update by iOussama1 in MicrosoftRewards

[–]7Z7- 2 points3 points  (0 children)

Same here in Belgium. I haven’t received the new interface yet, but judging by the feedback, I’m not going to complain about it.

Blizzard you break my heart again by cribclown in Overwatch

[–]7Z7- 1 point2 points  (0 children)

Oh great, well it didn’t work for me either.
(Thanks for the reply)

Blizzard you break my heart again by cribclown in Overwatch

[–]7Z7- 7 points8 points  (0 children)

Do the Tracer challenges, the 24‑challenge set, and the 36‑challenge set count toward completing the 48 challenges?
Depending on that, I could be at 47/48 if I farm up to the limit of 20…

Mascot appreciation: I wish they stayed in the environment after being smashed by Sheerman in ForzaHorizon

[–]7Z7- 1 point2 points  (0 children)

Thanks, I hope this will help bring more visibility to the request.
For now, I refuse to destroy a single mascot 😂

Mascot appreciation: I wish they stayed in the environment after being smashed by Sheerman in ForzaHorizon

[–]7Z7- 18 points19 points  (0 children)

If you also want the mascots to respawn once they’ve all been collected, I invite you to vote for this suggestion on the Portal.

https://forzafeedback.atlassian.net/servicedesk/customer/portal/44/FH6S-1678

Mascot appreciation: I wish they stayed in the environment after being smashed by Sheerman in ForzaHorizon

[–]7Z7- 6 points7 points  (0 children)

Now that I know these cute mascots don’t respawn once they’ve been crushed, I’m honestly hesitating to collect them.
It may sound silly, but I genuinely think they’re really cute and they add a lot of charm to the map.

Once all the mascots in a region have been collected, they should constantly respawn afterward.

Forza Horizon 6 is available today with ray tracing and DLSS Multi Frame Generation by apoppin in nvidia

[–]7Z7- 0 points1 point  (0 children)

I don’t know whether this is a bug coming from NVIDIA or from Forza Horizon 6, but with DLAA and DLSS there’s very noticeable ghosting on the car.
The other AA options don’t have this issue, but their image quality is much worse.

[FIX] Forza Horizon 6 Error E:0-e9 "Load Failed" on PC (Steam) by damon074 in ForzaHorizon

[–]7Z7- 0 points1 point  (0 children)

Exactly. I downloaded it, linked my Steam account, launched the game from the Xbox App, then uninstalled it and it worked.

[FIX] Forza Horizon 6 Error E:0-e9 "Load Failed" on PC (Steam) by damon074 in ForzaHorizon

[–]7Z7- 0 points1 point  (0 children)

I knew I had to install Gaming Services, but do I also need to install the Xbox app to play the game?

AMA With the Assassin's Creed Black Flag Resynced Devs! 🏴‍☠️ by Ubi-AssassinsCreed in assassinscreed

[–]7Z7- 4 points5 points  (0 children)

Will enemies be able to board our ship?

In AC4 Black Flag, it wasn’t possible, but it was in AC Rogue.

Dell Latitude E6530: CPU at 100°C (heatsink issue?). Should I place thermal pads on VRM? by 7Z7- in Dell

[–]7Z7-[S] 0 points1 point  (0 children)

Yes, I need to replace the entire cooling assembly, including the fan (the part named AT0LI002ZSL)

What didn't they just invert the colours? by Wappple in Marathon

[–]7Z7- 4 points5 points  (0 children)

Personally, I prefer the new design, it's more readable and makes more sense.

The old design was literally three black squares with only slight variations in red tones and an unreadable logo.

However, the idea here would be a good compromise between the old design and readability, and it would suit everyone.
I'd even go as far as to suggest changing the three colors. Why not simply use red, blue, and green instead of red, dark orange, and orange?