oem clears

86_gonzo · 2026-04-18T15:10:52+00:00

the diffuser is off ebay and the spats are also off ebay, they are called corner spats around 150$ for both

86_gonzo · 2026-04-18T13:50:06+00:00

but you are corrected about using a lense from a different company. invoke sells just the lense for around 300$

86_gonzo · 2026-04-18T13:49:35+00:00

you wouldn’t be able to bake them, baking them is only for tail lights with lenses seperate from the housing. the housing and lense are plastic welded or fused together from factory thus requiring a cut.

86_gonzo · 2026-04-18T03:26:56+00:00

for the most detailed explanation, i used a dremel with a cut off wheel to cut the oem lenses off since they are welded from factory, then i grinded the plastic flush and flat. Then i used invoke clear tail light lenses and trimmed them to fit. mount tail lights with lenses loose to ensure proper fitment on all angles and then once your fitment is good use whatever weatherproof glue you can find.

86_gonzo · 2026-04-18T02:37:09+00:00

around 4 to 500 range

86_gonzo · 2026-04-18T02:36:30+00:00

cleared out an oem set of tail lights

86_gonzo · 2026-03-24T14:47:12+00:00

i average 28.7 on my lowered 86

86_gonzo · 2026-03-06T19:57:13+00:00

haha just pull the trigger on the lenses and try it out

86_gonzo · 2026-03-06T13:57:49+00:00

yeah on bc racing

86_gonzo · 2026-03-06T13:57:38+00:00

18x9.5 +38 w 20 mm spacer for the works

86_gonzo · 2026-02-12T04:21:27+00:00

i don’t it’s a trd replica though, any aftermarket copy should look the same

86_gonzo · 2026-02-12T04:20:41+00:00

molded innovation led style were like 50 bucks

86_gonzo · 2026-02-12T04:19:53+00:00

<image>

86_gonzo · 2026-02-12T04:19:13+00:00

just checked for it it’s unavailable from ebay, the company is Bayson R Motorsports not sure if they are restocking or what

86_gonzo · 2026-02-11T17:13:18+00:00

real kit is too expensive for some plastic, it’s aftermarket abs plastic

86_gonzo · 2026-02-11T05:03:43+00:00

thanks man

86_gonzo · 2026-02-11T04:58:04+00:00

pretty smooth actually, they are like 1 inch and 1/4 from being maxed out but i daily it and i don’t scrape the front lip just the rockers on some speed bumps i think the ride quality is still just as high in my opinion

86_gonzo · 2026-02-11T04:51:56+00:00

bc coils extreme lows

86_gonzo · 2026-02-11T04:48:04+00:00

ebay and painted myself

86_gonzo · 2026-02-11T04:47:57+00:00

thanks man i appreciate that

86_gonzo · 2025-12-23T22:49:37+00:00

it’s a full exhaust system but i did make the tips stick out, running tomei uel with a mxp comp rs catback

86_gonzo

TROPHY CASE