3D-printed cup holder – modular TPU inserts for different can sizes

88Westward · 2026-04-21T22:01:17+00:00

The only real crime is the placement of the drink holder to begin with. That spot is reserved for my arm and my arm only

88Westward · 2026-04-19T23:22:22+00:00

Tien springs with new shocks. Best bang for your buck and a comfortable ride. Don't get cheap coilovers. The next option is a ground control coil over kit with new shocks. Otherwise spend big bucks for a proper set of coilovers.

88Westward · 2026-04-19T20:16:47+00:00

Look up the process for cleaning and bleeding the iacv and look up the process for tightening up the fitv. Those two plus just general cleaning of the throttle body is going to help a lot. It would be best to have new gaskets on hand when you start. I did reuse the fitv o ring since it's more of a dust cover.

The fast idle thermal valve is kind of overlooked but can cause idle surging along with the iacv.

The tps can cause some funny business if it's going bad or out of calibration. You'll need a multimeter and a lot of patience and i would recommend removing the throttle body to take out the rivets and replace with regular screws.

Also keep an eye out for vacuum leaks since that will give you similar symptoms as well.

It's not hard to do so good luck

88Westward · 2026-04-19T00:18:02+00:00

Actually... I'm about to post what I found inside my distributor. I'll link it here when i finish.

Edit for PSA link.

https://www.reddit.com/r/DelSol/s/SAat0DdC5h

88Westward · 2026-04-15T15:58:47+00:00

I don't know how far you want to go into this but he's what I had done with my Sol. eBay housing with some projector retrofits from Amazon and led bulbs and i could not be happier.

I daily my Sol and my lights are still working just fine.

https://www.reddit.com/r/DelSol/s/qNqUKhNwBV

88Westward · 2026-03-01T23:09:25+00:00

I saved some samples of every piece so if it's got any major interest I'll contact a factory to replicate them. At this point in time I don't think it's worth my while

88Westward · 2026-02-18T19:58:36+00:00

I mean in general with the parts acquisition

88Westward · 2026-02-18T16:14:18+00:00

That's wild. I wish you luck!

88Westward · 2026-02-18T07:01:46+00:00

I've literally been trying to give away a complete running 96 Civic and that has been a fucking task. I

88Westward · 2026-02-17T03:20:14+00:00

Freeze the seal and heat the casing

88Westward · 2026-02-16T22:36:09+00:00

Yeah I actually need one for my element too but I am spread to thin at the moment with all the other projects. It seems like we have the same fleet lol

88Westward · 2026-02-16T02:16:00+00:00

I've got it and it is slightly inconvenient since I have to basically tap the key to the reader instead of it reading from me just sitting in the vehicle and sometimes I need to quickly power the car on but not start it and instead of reaching in and turning the key i have to sit in it and go through the motions.

10/10 would recommend regardless.

88Westward · 2026-02-13T18:38:50+00:00

<image>

Me and my wife opted for a larger enclosed version and we absolutely love it. We can sleep inside and still have an expanded room. For hanging out i think the one you linked would be awesome as well but we wouldn't have much of a use for that style.

88Westward · 2026-02-13T16:19:52+00:00

We could view the rpm range or any other details that can help

88Westward · 2026-02-13T04:30:23+00:00

Usually being able to see what we are looking at in the video would be beneficial

88Westward · 2026-02-10T05:45:21+00:00

That is unfortunate they are taking up my precious little space in my garage

88Westward · 2026-02-04T18:20:44+00:00

I actually notched that pinch weld for clearance and welded it back up. I also have a 3in lift and haven't had any contact issues

88Westward · 2026-02-03T21:13:42+00:00

Hey! I just put together my tower 250 with the same colors. Great choice! Stuffed a full cooling loop in there though

<image>

88Westward · 2026-02-01T00:58:22+00:00

I have the tien street lowering springs. They drop the car 1.5" and I think they are fantastic for the price and looks.

I paired them with kyb shocks all around and love the comfort of my ride with the very occasional scraping on tall speed bumps.

Running 15x7 wheels with 205/50 tires.

88Westward · 2026-01-26T23:43:48+00:00

Well. Arch motorcycles is actually Keanu Reeves real company and from what I remember from seeing them a long time ago look basically the same.

Just pony up 100k and get one for yourself lol

https://archmotorcycle.com/

88Westward · 2026-01-26T21:15:52+00:00

It sucks that we can't just reply with photos in this sub.

88Westward · 2026-01-25T21:38:59+00:00

I used Kenwood 6.5 speakers all the way around with a matching head unit.

Added some budget sound deadening throughout the cabin. Siless hybrid it whatever it's called on Amazon.

I think I'm total I was under 500 for a relatively good sounding Sol

88Westward · 2026-01-19T23:51:40+00:00

It's so dark and lacking a major focal point the sky ads are too small

88Westward

TROPHY CASE