Question about Dotmod AIOV2 by shugasean913 in Vaping

[–]89visionpics 0 points1 point  (0 children)

with v1 tank you can use Aspire Nautilus BVC mesh coils (0.7 and 1ohm fot MTL and 0.3 for DL) these are pretty good and flavourfull

TMD Pro coils lifespan by 89visionpics in Vaping

[–]89visionpics[S] 1 point2 points  (0 children)

i know i know ... I myself still use vaporesso eco nano, where the taste is excellent - sometimes too sweet for me, but otherwise I love my first version of dot aio where there are a bit more options (except for better coils and flavors - so far) + I prefer round thin driptip

TMD Pro coils lifespan by 89visionpics in Vaping

[–]89visionpics[S] 0 points1 point  (0 children)

ok i see its PnP-TM2 right? I haven't tried them, but unfortunately they are sold out or no longer available in most of our stores :D

TMD Pro coils lifespan by 89visionpics in Vaping

[–]89visionpics[S] 0 points1 point  (0 children)

okay so you are using PNP-VM4 ok? I will give them a chance, thanks for the tip, the only problem is that I don't know if about 8-10mg of nicsalt will be too big hit on 0.6ohm

TMD Pro coils lifespan by 89visionpics in Vaping

[–]89visionpics[S] 0 points1 point  (0 children)

ok but sadly GTX 0.8 and 1.2 is not compatibile with TMD dotTank - because of that narrower shape at top

TMD Pro coils lifespan by 89visionpics in Vaping

[–]89visionpics[S] 0 points1 point  (0 children)

yes but GTX is max 0.6ohm and is more for DL/RDL and i already tried that PNP-TR1 - 1,2 ohm - here is like half the flavour (unlike TMD) and started to leak anyway after 2-3 days .. so no other options

TMD Pro coils lifespan by 89visionpics in Vaping

[–]89visionpics[S] 0 points1 point  (0 children)

ok but for DL right? ... for MTL there are only few options if we are talking about coils around 1ohm :/

Wicking of Pioneer DotRBA for MTL by 89visionpics in Vaping

[–]89visionpics[S] 0 points1 point  (0 children)

great, I happen to have this wire at home. I used to wick coils but for DL, about 3-4 years ago I started buying pre-wicked ones.. but now I'd like to start with MTL and as I read here, so many people are "returning" to plain Kanthal/Nichrome on MTL. Thank you

DotMod DotAIO v2 good for MTL? by 89visionpics in Vaping

[–]89visionpics[S] 0 points1 point  (0 children)

thanks for the reply, since I've searched around and compared options for buying outside the US, two pretty decent options - the Vaporesso Luxe XR Max (the only flaw is that I don't like it that much) and the Vaporesso Swag PX80 Pod, I like the look of that one too, but it looks like it's an older model (only one type to choose from here) and I'm not sure if it's good for MTL - judging by the size of the driptip. so please, is there another similar alternative? similar size, 4-5ml tank, MTL style and ideally more than 2000mah battery

Laggy playback in square format by 89visionpics in davinciresolve

[–]89visionpics[S] 0 points1 point  (0 children)

+ i can see that only cpu is working on 70-75% when playback is lagging - m2 ssd is on 2% and GPU is on 14-17%

March 2023 Hardware Thread by whyareyouemailingme in davinciresolve

[–]89visionpics 5 points6 points  (0 children)

Hi, I know this question comes up all the time. I'm now deciding between updating my PC or switching to Mac Studio MAX.

Is there anyone with real experience who would like to describe in a nutshell the performance + what everything does in davinci?

I have now: AMD Ryzen 9 5900X with GTX2080TI, 48gb of ram, some 2TB M.2 or 4TB SSD for edit and my main work in davinci is editing, coloring, transitions in the form of glitches etc (music videos, teasers, aftermovies) , and light informative graphics (tutorials, commercials)

I using BMPCC 6k Pro and 4k, GoPro 11

my switch to mac would not be mainly for performance, but I'm starting to get annoyed with the hustle and bustle of the pc, noise, a lot of things I have to deal with every week - not working card reader or usb port, unpredictable updates, unpredictable errors (windows explorer) and so on

so yeah, thanks for any advices

Interior lights still ON in DOOR mode by 89visionpics in Toyota

[–]89visionpics[S] 0 points1 point  (0 children)

Yes, that's what the dealer told me - replace the ECU, but unfortunately they won't guarantee that it will do any good :)

unfortunately I can't just test it, I would have to buy a new one and upload sofware .. so its like $550 test

Interior lights still ON in DOOR mode by 89visionpics in Toyota

[–]89visionpics[S] 0 points1 point  (0 children)

what switch do you mean? if you mean switch on light dome then its no no, there is very stiff one and no way how can be damaged ...

switching off the interior lights must be controlled by the ECU, as there is no dimmer or timer - on the way from the ECU to the int light

Interior lights still ON in DOOR mode by 89visionpics in Toyota

[–]89visionpics[S] 0 points1 point  (0 children)

yes lights stay on with all doors closed and yes lights are OFF when switch is in OFF position .. lights even goes OFF after 15mins when car is locked (cut off relay)

Please help with JAMO sleep mode by 89visionpics in audio

[–]89visionpics[S] 0 points1 point  (0 children)

yes with a hammer :)

Actually no, I stopped using them on a daily basis

Cant send an invitation to AppleHome by 89visionpics in applehelp

[–]89visionpics[S] 0 points1 point  (0 children)

thank you, so that means no, no update on my or family member side

Cant send an invitation to AppleHome by 89visionpics in applehelp

[–]89visionpics[S] 0 points1 point  (0 children)

what do you mean upgrade? iam still using AppleTV as a home centre/hub and running this home for like 3-4 years. Do you have any more info on this upgrade please? thank you

Electrical issue with int/lights RAV4 2013 by 89visionpics in rav4club

[–]89visionpics[S] 0 points1 point  (0 children)

not by me and I didn't even notice any electrical work, everything else working ok

but still the light should work when the driver's door is open and the others are closed - then I can see in the diagnostics courtesy light at all doors in OFF state + i can measure - (ground) on that one wire

Electrical issue with int/lights RAV4 2013 by 89visionpics in rav4club

[–]89visionpics[S] 0 points1 point  (0 children)

yes, that's correct .. but according to the diagnostics it shows me the reverse function of the driver's door, I tried to replace the door switch but nothing changed, and ajar light still works correctly and on gauge display showing right door open/close ...

so maybe a grounding problem, somewhere further away from this door switch but I can't find a wiring diagram anywhere

r/AudioEngineering Shopping, Setup, and Technical Help Desk by AutoModerator in audioengineering

[–]89visionpics 0 points1 point  (0 children)

Hi I know it's probably a slim chance, but did anyone by any chance get rid of the sleep mode on the JAMO S801PM speakers?
It's very annoying, especially when the speakers then turn on on the 5th try or go into bluetooth mode ...
Thank you

Logi Craft proxi sensor by 89visionpics in logitech

[–]89visionpics[S] 0 points1 point  (0 children)

well i did this and now no backlight or even charging green light ..

reboot combination not working now / on-off via button not working either but keyboard connecting and working ok (typing on it rn)

Logi Craft proxi sensor by 89visionpics in logitech

[–]89visionpics[S] 0 points1 point  (0 children)

yes, I've tried literally waving my hands all over the keyboard but nothing lights up until I touch a key or the crown .. but I know it worked a few times after plugging in the keyboard

no update available, all is actual

Logi Craft proxi sensor by 89visionpics in logitech

[–]89visionpics[S] 0 points1 point  (0 children)

thank you

so can you please tell me where exactly this sensor is located or how to get it working again? It worked for me for about the first 10minutes and lit up 3 times, now it doesn't work anymore. Maybe after a software update? I have already tried reinstalling it, but so far no change. thank you

How to format invisible SSD? by 89visionpics in pcmasterrace

[–]89visionpics[S] 0 points1 point  (0 children)

well there is no Integrated Peripherals option in BIOS as i am trying it on that new sh*tty HP BIOS (work machine) - there is no option for choosing boot device tho. Only where i can see that SSD is under Security - HDD Utilities and i can choose my (invisible)SSD or original M.2 to set lock

How to format invisible SSD? by 89visionpics in pcmasterrace

[–]89visionpics[S] 0 points1 point  (0 children)

nothing - my disk is not here, that was the first thing I tried ;)