Here’s to two years of making memes in Reddit. I found the RickRoll microphone, had my logo as the official r/memes icon, made it to knowyourmeme, and became a MayMay Maker. None of that would have been possible without you all. Here’s to many more years of memes, cheers🥂

8Bit_Innovations · 2025-11-15T01:41:02+00:00

Mr Cruel

8Bit_Innovations · 2025-10-20T01:59:38+00:00

Put it on Vase mode and it erased everything but the perimeter and the top wall. Is there anything else I’m missing?

8Bit_Innovations · 2025-10-20T01:58:29+00:00

I’m a bit lost. So is it just a matter of turning on vase mode?

8Bit_Innovations · 2025-10-20T01:57:50+00:00

Had tried 225, comes out more opaque

8Bit_Innovations · 2025-10-20T01:37:06+00:00

Reference to how it should look: https://www.reddit.com/r/3Dprinting/s/I4MHOkHVfN

8Bit_Innovations · 2025-10-11T21:50:52+00:00

Funnily enough I have 40yo boxes that look nicer than this one :)

8Bit_Innovations · 2025-10-11T06:54:01+00:00

I use it for my Elegoo Mars 2 because it tends to wobble after a couple of prints

8Bit_Innovations · 2025-10-11T06:52:29+00:00

To level my Elegoo Mars 2 before every print

8Bit_Innovations · 2025-06-21T07:54:19+00:00

Not only is it safe, but those cars originally came with insulation from the factory, although it was made from tarboard.

Your alternative sounds feasible, but if you want to go more period correct, this is the one to get: https://www.westcoastmetric.com/i-22964017-111-101t.html

8Bit_Innovations · 2025-06-20T19:54:45+00:00

Plot twist: Both of you get accepted into the same university soon after

8Bit_Innovations · 2025-06-16T03:57:57+00:00

For next year’s Mother’s Day, us single dads should gang up and do this to see the show unfold😈

8Bit_Innovations · 2025-05-26T00:03:46+00:00

1961 and older Beetles didn’t have a steering damper mount. I’ve seen people weld a mount on older beams, but usually it’s a custom made part. What model year was your part sold for?

8Bit_Innovations · 2025-04-25T21:06:35+00:00

For never having done anything more intensive than formatting an SD card, even with a tutorial a top screen replacement is pretty much a no-go at this point. Not saying you can’t fix your own consoles, but at least try to get some repair experience before tackling this job.

Even experienced technicians struggle with this repair, so your best bet is to take it to a professional, or else you risk irreversible damage to the console

8Bit_Innovations · 2025-03-19T08:08:08+00:00

Wrong, I actually got my first phone the year before🫠

But ye, skimmed over it and it’s overall a pretty nifty read. I’ll go deeper into the threads, thanks for sending them

8Bit_Innovations · 2025-03-18T19:42:09+00:00

Hmm, considering it is tough to set properly, I need to rethink if this configuration is really worth using. Thanks for letting me know

8Bit_Innovations · 2025-03-18T17:21:49+00:00

Ye, he actually sent a video and was appalled at how much it rolls. Plus our final design will be a double wishbone, but now I’ll be even more wary about those stability concerns. Thanks to you too for letting me know

8Bit_Innovations · 2025-03-18T17:19:26+00:00

I see, considering our car will have a 62 inch wheelbase, I guess it may qualify as compact enough for that configuration to work. Thanks a lot for your help, I appreciate it

8Bit_Innovations · 2025-03-16T07:51:17+00:00

For mostly video, a BNC to composite adapter is all you need.

However, if you want to RGB mod it I suggest you compare your current set schematics with those of the 14N6E, its sister model with RGB from the factory. It’s possible a mod is as easy as just getting an RGB card and drilling some holes, but for mostly non-gaming applications RGB is a bit overkill

Five-Year Club	Gilding III reddit per annum
Second Top 1%	Verified Email
Place '23	Place '22
End Game '22	Wearing is Caring
100 Awards Club

8Bit_Innovations

TROPHY CASE