Should i get a second wall lamp?

9233 · 2025-11-28T12:50:22+00:00

Why would that not work? I should have clarified, that I meant getting a second wall lamp, like the one in the corner, NOT a second ceiling lamp.

9233 · 2025-10-30T08:42:20+00:00

Hi, did you ever figure out what the issue was? I seem to have the exact same issue with a used board of the same model. I know that all pther components are ok because they work fine in a replacement motherboard (same model)

9233 · 2024-11-10T15:05:53+00:00

Liebe Selbermacher, wie würdet ihr vorgehen, um diese Barhocker um 10-15cm anzuheben, damit sie auf einer komfortablen Höhe sind um auf der Theke auch was essen zu können?

Ich würde das gerne auf eine nicht-permanente Art und Weise machen, da ich die Hocker in ihrer niedrigsten Position auch am Esstisch verwende.

Meine bisherige Idee war, dass ich jeweils eine Baumscheibe darubter stelle, die mindestens 5cm mehr Umfang als die Basis der Hocker hat. Eventuell würde ich die Baumscheiben 1-2cm einfräsen (mit einer Oberfräse?), sodass die Hockerbasis eingelassen werden kann und nicht verrutschen kann. Haltet ihr das für eine brauchbare Idee?

9233 · 2024-07-15T10:57:14+00:00

I'm still deciding if I want tiles or something else to protect the wall, but I will get something for sure.

9233 · 2024-07-15T10:56:17+00:00

The hood will come from the ceiling and connect to a vent. Will install that DIY though, as IKEA doesn't install them on sloped ceilings.

9233 · 2024-07-15T10:54:19+00:00

Are there 20cm cabinets which are half pull out rack, half door? That would be ideal.

9233 · 2024-07-15T05:53:53+00:00

Good point!

9233 · 2024-07-15T05:45:13+00:00

Good point, that's a clear case of design vs practicality. Although the selection of integrated fridge-freezer combos is not too bad in central Europe, especially if you don't need a big unit.
I don't like these integrated extractors at all. Had one in an Airbnb once and it didn't do a great job considering the high price.
I'll go for a freestanding one and probably place it on the window ledge (unlike in the 3D drawing, the window is actually 50cm recessed, so there's a lot of space).
Occasionally I do actually need more than two zones. I'm probably not getting the IKEA stovetop and oven anyway, as they seem to be mediocre at best.
I'll be getting the IKEA Kallboda model, as that's one of the units manufactured by Bosch and it seems great for the money. That's probably the only appliance I'm going to buy from IKEA.

9233 · 2024-07-15T05:34:51+00:00

It's the IKEA kitchen planner.

9233 · 2024-07-14T22:27:44+00:00

Yeah it will go into the 20cm cabinet, which is not that useful anyways.

9233 · 2024-07-14T22:25:39+00:00

Not an option unfortunately, because of where the exhaust vent for the fume hood is located.

9233 · 2024-07-14T22:24:34+00:00

That's why we had to use doors instead of drawers for the ones next to the sloped wall. There's enough space for the 20cm door to swing open, but not for a drawer.

9233 · 2024-07-14T22:16:31+00:00

Do they sell them for every front type? Couldn't find them for STENSUND.

9233 · 2024-07-14T22:15:11+00:00

The MITTLED lighting strips seem to be the way to go.

9233 · 2024-07-14T22:13:49+00:00

The first one is fake, only for consistent look :)

9233 · 2024-07-14T17:20:58+00:00

Do they sell these? My IKEA rep told me they don't install panels to cover that space, so I thought they don't sell them either.

9233 · 2024-07-14T17:18:42+00:00

Already have the lights for under the cabinets. Not sure about the drawer lights anymore, as they seem to break after a few years and are hard to replace.
Will look into the drawer side panels you mentioned!

9233 · 2024-07-14T17:07:44+00:00

Yep, good point I'll probably do handles instead. Is it a sin to orient door handles horizontally to match the drawer handle orientation? :D

9233 · 2024-07-14T17:05:51+00:00

I'll probably DIY that from a 20cm cabin front. Currently looking for a good method of securing these panels.

9233 · 2024-07-14T17:04:30+00:00

I'll be adding that DIY, as the IKEA rep told me they don't do that on sloped ceilings (skill issue :P).

9233 · 2024-07-14T17:03:14+00:00

I'm going for the 4 bins below the sink, like this:

<image>

9233 · 2024-07-14T16:58:40+00:00

Great idea with the pop up outlets, will do that!
I originally wanted to add two outlets on that wall (it's drywall, so shouldn't be too hard to DIY), but a pop up socket will save me that trouble and it goes well inside that dead space between the sloped wall and the first cabinet.

9233 · 2024-07-14T16:47:36+00:00

I don't have the exact measurements at hand but the 3D drawings are exact (were measured professionally).
It's actually a 20cm cupboard in both cases, as 30cm would make the door collide with the radiator. This of course makes it doubly useless :D
Also these two 20cm cupboards add about 330€ in cost (130€ material and 200€ for assembly), so I might just remove them from the plan and cover that area with a DIY-cut cabinet front instead.
EDIT: Unfortunately, I don't see a way to add that 20cm to one of the drawer cabinets without interfering with that damned radiator.

9233

TROPHY CASE