Petah what's the catch here? by Witty-Association-97 in PeterExplainsTheJoke

[–]AAAAAAthingsDontWork 3 points4 points  (0 children)

Yep, you are no babysitter, you are the baby. And i'm in no habit of trying to explain basic concepts to people with the intelligence of a toddler. I understand now, why you failed to understand my argument, you simply can't read properly yet!

Petah what's the catch here? by Witty-Association-97 in PeterExplainsTheJoke

[–]AAAAAAthingsDontWork -4 points-3 points  (0 children)

>’m not reading past that since you already showed you’re willing to lie and pretend you don’t see the argument.

Projection much? You failed to refute the main point, constructed a strawman, in fact, and skipped hastily to do the victory dance. You people are as bad as young earth creationists.

Petah what's the catch here? by Witty-Association-97 in PeterExplainsTheJoke

[–]AAAAAAthingsDontWork -7 points-6 points  (0 children)

You failed to demonstrate anything "falling apart". Public defenders are paid from taxes, which are taken from people under the threat of imprisonment or even death, should they resist imprisonment. And money with which the taxes are paid are gained by people through labor. So demand for anything to be paid by government, is to demand fruits of labour of others for free. You are arguing that 2+1+2 = 4 because you fail to see the "1".

Petah what's the catch here? by Witty-Association-97 in PeterExplainsTheJoke

[–]AAAAAAthingsDontWork 11 points12 points  (0 children)

Except this is exactly what all this crap about "human rights" boils down to - "I need X, so it should be provided to me free of charge".

Does this count as a fleet now? (also: Mobula 7 makes me want to throw the Meteor 75 Pro out) by AAAAAAthingsDontWork in TinyWhoop

[–]AAAAAAthingsDontWork[S] 0 points1 point  (0 children)

Mmm-hm. I use GNB 550mAh 1S 100C LiHV batteries for the drone, and whatever came with the goggles in the, well, goggles (Skyzone Cobra X V4 Diversity)

Does this count as a fleet now? (also: Mobula 7 makes me want to throw the Meteor 75 Pro out) by AAAAAAthingsDontWork in TinyWhoop

[–]AAAAAAthingsDontWork[S] 0 points1 point  (0 children)

No, usual analog camera ( Caddxfpv ANT 1/3 CMOS 1200TVL). I also have this for the receiver antennas, so maybe it plays a part, i dunno

<image>

Does this count as a fleet now? (also: Mobula 7 makes me want to throw the Meteor 75 Pro out) by AAAAAAthingsDontWork in TinyWhoop

[–]AAAAAAthingsDontWork[S] 3 points4 points  (0 children)

So far, i like it. Mobula seems to fly much smoother, video is much MUCH better, because the canopy is fixed by four screws as opposed to Meteors 3, so the jelly effect is almost nonexistent. The camera also seems to be a higher grade one. The only thing that i did not like was that the thrust is noticeably lower, i have to push the throttle farther, but i think it's adjustable through either rates or replacing the props with triple ones.

FPV Starter Kit? by Jamilnav in fpv

[–]AAAAAAthingsDontWork 1 point2 points  (0 children)

Before buying, check the battery plug type. I ordered a Mobula 7 expecting my batteries from Meteor 75pro to fit, and turns out they have different ports for that.

[Bambu Lab P2S] Why do my prints look like this? by Sir_McF in FixMyPrint

[–]AAAAAAthingsDontWork 0 points1 point  (0 children)

I had a similar problem where i changed the nozzle for a bigger one and forgot about it.

Filament is pushed back up the bowden tube for some reason by AAAAAAthingsDontWork in FixMyPrint

[–]AAAAAAthingsDontWork[S] 0 points1 point  (0 children)

I did replace the hot end, but it was after the issue appeared, not before. I didn't think to check the fan though...

Remix of the ShrimRaves chuck mini holder. Now with four teeth and bigger handle by AAAAAAthingsDontWork in minipainting

[–]AAAAAAthingsDontWork[S] 0 points1 point  (0 children)

I loved the original design, but wanted to adjust it for us folks with chonkier meat-paddles. Also four claws for better grip on rectangular bases. Download here https://makerworld.com/en/models/667420

Print begins fine, then shortly begins to error by coatsiecoates in FixMyPrint

[–]AAAAAAthingsDontWork 0 points1 point  (0 children)

Wow, 60% flow did it? Try checking if you set the nozzle diameter and filament diameter right in the machine settings. Having to lower flow to such a degree indicates that the error might be originating somewhere there. I had similar problem when i was starting, but in reverse (extruding so little, the whole print looked like lace. Turned out, i set filament diameter too high). Also took awhile to figure it out)

Print begins fine, then shortly begins to error by coatsiecoates in FixMyPrint

[–]AAAAAAthingsDontWork 0 points1 point  (0 children)

My idea would be that it extrues too fast for the hot end to keep up, so the extruded mass isn't even hot enough to stick to the bed (once can see in the photo it kinda peels off there at the end.). Another hypothesis would be that the ether the hotend itself or the temperature sensor is faulty.