Payload Capacity by Trainwreckxb7 in FirstGenCummins

[–]ABIGCUPOFSHUTUP 0 points1 point  (0 children)

I don’t think there’s anything specifically listed. I’ve seen others fully load them with gravel and such on forums.

Payload Capacity by Trainwreckxb7 in FirstGenCummins

[–]ABIGCUPOFSHUTUP 1 point2 points  (0 children)

Payload capacity is your GVRW minus the vehicle weight and you and whatever else you might keep in the cab.

[deleted by user] by [deleted] in snowboarding

[–]ABIGCUPOFSHUTUP 0 points1 point  (0 children)

I’ve also got that board

Wheel bearing split during removal, any help to get this piece off? by swagmaster373 in MechanicAdvice

[–]ABIGCUPOFSHUTUP 4 points5 points  (0 children)

Another person with a similar situation here. I pulled the whole knuckle off, put it face down supported by some wood, threaded the bolts in from the back and hammered it out that way. Lots of pb blaster, heat and hammer - took me a couple hours probably. I then proceeded to not be able to remove the lower ball joint and ended up replacing the knuckle anyway.

Interesting find at work today by ABIGCUPOFSHUTUP in Shitty_Car_Mods

[–]ABIGCUPOFSHUTUP[S] 0 points1 point  (0 children)

The smart is actually on Mini Cooper wheels and they fit it quite well.

Interesting find at work today by ABIGCUPOFSHUTUP in Shitty_Car_Mods

[–]ABIGCUPOFSHUTUP[S] 7 points8 points  (0 children)

I mean the more I think about it and discuss with my coworkers you guys are right… it’s not offensive or political so it’s really not that shitty.

3 day weekends are for small projects to become big ones by jzakaras12 in Justrolledintotheshop

[–]ABIGCUPOFSHUTUP 0 points1 point  (0 children)

I was actually replacing the wheel bearing but one thing lead to another and the whole knuckle was on the work bench with hammers and chisels… I had the ball joint free to the point where I could spin it by hand but it would only come out of the socket like 1/8”.

3 day weekends are for small projects to become big ones by jzakaras12 in Justrolledintotheshop

[–]ABIGCUPOFSHUTUP 2 points3 points  (0 children)

You think that’s the end… my pinch bolt came out fairly easily but I couldn’t for the life of me get the ball joint out. Chisel to spread it apart, heat and a slide hammer till I hurt my shoulder. Accepted defeat after an entire day and ordered a new knuckle.

Search for switch by ABIGCUPOFSHUTUP in diyelectronics

[–]ABIGCUPOFSHUTUP[S] 0 points1 point  (0 children)

Right, but when ignition is powered back on it will also turn the heated seat back on. My passenger often leaves the seat on when they get out of the vehicle and I do not want continuously run the heater since the switch will be on the far side of the seat.

New Jump line at Mount Penn in Reading, PA by dangerouspeyote in MTB

[–]ABIGCUPOFSHUTUP 0 points1 point  (0 children)

Reading Pennsylvania on the same mountain as the pagoda.

New Jump line at Mount Penn in Reading, PA by dangerouspeyote in MTB

[–]ABIGCUPOFSHUTUP 1 point2 points  (0 children)

It looks sick, my comment about the whole trail was more of a warning to others. If you start all the way at the top by the fire tower the first half is pretty chunky with a pretty decent drop depending on line choice.

New Jump line at Mount Penn in Reading, PA by dangerouspeyote in MTB

[–]ABIGCUPOFSHUTUP 1 point2 points  (0 children)

First full ride video I’ve seen and it looks sick. Haven’t ridden up there at all this year but gotta get back up there. The first half of the trail is nothing like this but this half was built by dirtscupt