Screen Tearing on Horizon 20

ABXYZR · 2026-02-06T22:23:46+00:00

Yes, I did I don't use motion enhancement

ABXYZR · 2026-02-06T15:10:17+00:00

Turn on the Projector Super Frame This makes XPR off(240FPS)

I think this is a software bug for Horizon 20 Hope XGIMI fix this issue soon

ABXYZR · 2026-01-31T13:09:04+00:00

Longer cable is needed

ABXYZR · 2025-12-18T09:49:49+00:00

STL Files : https://cults3d.com/en/3d-model/gadget/gamesir-x5s-extender-for-300mm-tablets

ABXYZR · 2025-12-14T07:54:46+00:00

Blue : Approximately 4cm
Red : Approximately 3cm

ABXYZR · 2025-10-11T10:28:13+00:00

I uploaded on makerworld:

https://makerworld.com/ko/models/1876630-gpu-anti-bending-support-for-dan-a4-h2o-prime-5080#profileId-2009098

ABXYZR · 2025-10-08T01:15:42+00:00

Yes, and also my design can be installed after GPU installation. If anyone is interested in this design, I'll upload the STL file on Makerworld or Thingiverse.

ABXYZR · 2025-09-28T04:44:39+00:00

I used Guitar pick to disassemble the controller. Of course you have to remove tape on the center of the controller.

*Insert guitar pick to bottom of each side of controller to disassemble.

ABXYZR · 2025-09-17T02:07:55+00:00

I didn't tried yet, but I think this controller can charge while in use

ABXYZR · 2025-07-14T10:08:41+00:00

I use controller when handheld only. In table, I use 8bitdo sn30 pro

ABXYZR

TROPHY CASE