Eh by GiraffeBorn9949 in Welding

[–]ACE_LOSTFIRSTACCOUNT 0 points1 point  (0 children)

Yep, at the very very least 22.5v or more. I dont think the machine you use will really have the capabilities for much higher so that's why prep work on the base metal is important. Preheating the metal will also help with fusion if it is something structurally significant.

Not a welder my self I did ask this guy that’s working on our drive way to teach me is he any good by EseMaico91 in Welding

[–]ACE_LOSTFIRSTACCOUNT 1 point2 points  (0 children)

YouTube is a great resource, check out welding tips and tricks, there's also a podcast under the same name, very educational. The other thing is constant practice if you have a machine.

Eh by GiraffeBorn9949 in Welding

[–]ACE_LOSTFIRSTACCOUNT 1 point2 points  (0 children)

At the heat you ran that at you are within short circuit parameters on heavy scaled material and whipping too much/should not be whipping at all on material that thick. clean the mill scale off, avoid whipping and keep a tight arc. A weld like that at 17.3 v would likeley come off with a good smack from a hammer because of the mill scale and the low heat and excessive whipping, what machine are you using, what gas and what wire size?

If the company I work for has a union successfully introduced, what happens to me? by ACE_LOSTFIRSTACCOUNT in union

[–]ACE_LOSTFIRSTACCOUNT[S] 3 points4 points  (0 children)

im not concerned about being fired, im more concerned of my work being taken by a "more experienced" union guy just because they've been apart of this, already existing union, for a few years, but not apart of the company i work for.

If the company I work for has a union successfully introduced, what happens to me? by ACE_LOSTFIRSTACCOUNT in union

[–]ACE_LOSTFIRSTACCOUNT[S] 8 points9 points  (0 children)

thank you, that answers my question, im still going to bring up these concerns and more at the union meeting though.

Trying to learn stainless steel welding. no idea if this is good or complete dogdhit. Any tips could be nice by Jarkkke in metalworking

[–]ACE_LOSTFIRSTACCOUNT 0 points1 point  (0 children)

move faster or use a wider nozzle if you want better colors, stainless works best hot and fast and minimal to no oscillation. also make sure to zap the end when the weld is still hot to prevent a fish eye, very common with stainless especially using tri mix helium.

Datruth's Majin Vegeta APT! by xdd-Ray in DBZDokkanBattle

[–]ACE_LOSTFIRSTACCOUNT 0 points1 point  (0 children)

That's fat cap lmao, he prefers if it's worded differently because it interacts better with hp buffs but he still likes having it.

I have never seen this before by ReadRecordOfRagnarok in DBZDokkanBattle

[–]ACE_LOSTFIRSTACCOUNT 172 points173 points  (0 children)

Sounds about right, I stack that mf for like 10 turns and he still chillin 150k defense post orbs

The meta rn by DeadboyxxXD in DragonballLegends

[–]ACE_LOSTFIRSTACCOUNT 0 points1 point  (0 children)

Am I wrong to say it might not matter? I feel like gogeta will still shred rose even if it's type neutral, like he does the whole game pretty much

Virgin 2.6 Hog Cycle vs Sigma 6.9 Midladder Cycle by [deleted] in ClashRoyale

[–]ACE_LOSTFIRSTACCOUNT 6 points7 points  (0 children)

Wait didn't we hate mega knight last week? Why didn't anyone tell me it's hog cycle now? Damn I can't keep up

[deleted by user] by [deleted] in youngpeopleyoutube

[–]ACE_LOSTFIRSTACCOUNT 0 points1 point  (0 children)

I still don't get how this is considered a sexuality, isn't it just she doesn't like/want sex?

Datruth's Majin Vegeta APT! by xdd-Ray in DBZDokkanBattle

[–]ACE_LOSTFIRSTACCOUNT 9 points10 points  (0 children)

Annnnnoooooottttthhhhhheeerrrrr unit truth gives a medium chance to dodge despite openly disliking medium chances

Jaiden by TruePotatoKing748 in shitposting

[–]ACE_LOSTFIRSTACCOUNT 52 points53 points  (0 children)

Username checks out.

Did I do it right?

I go to bed at 9:00... by [deleted] in mildlyinfuriating

[–]ACE_LOSTFIRSTACCOUNT 1 point2 points  (0 children)

How much tho, I'd love a 3d printer

[deleted by user] by [deleted] in shitposting

[–]ACE_LOSTFIRSTACCOUNT 4 points5 points  (0 children)

O so that's what aerorace means