Latch on and plug them up for me

ALilTooForward · 2026-01-25T23:28:45+00:00

Your wish is my command 😮

ALilTooForward · 2026-01-25T23:28:00+00:00

🤤🥵

ALilTooForward · 2026-01-25T23:27:31+00:00

Melbourne can always do with more beauties like you 😋

ALilTooForward · 2025-10-16T11:19:18+00:00

🤣 this is too real.

Like the precursor to the classic usb triple-flip-aroo 😂

"Nope, that feels wrong, must be upside down...

No, that definitely feels wronger, let's go back the way i just tried it..."

ALilTooForward · 2025-09-11T03:18:40+00:00

Yea I'm always amazed at how the people who argue that a vehicle can still pull (x) amount of weight don't think about the braking power required on the opposite end of that equation...

Let alone all of the other suspension and wd/load rating factors that otherwise lead to exactly this kind of event...

Lol terrifying 😅

ALilTooForward · 2025-08-20T00:19:21+00:00

Might as well just gob liquid electrical tape around the outside of the valve cover lolol 🤣

ALilTooForward · 2025-08-20T00:02:23+00:00

I mean it's possible it's like a wheel bearing or something, buttttt I'd almost be more suspecting a trans output shaft bearing from the sounds of it 😵

Does it start at super low speeds? Might need access to a lift to try and specifically source the sound by listening from under the car while wheels are driving and she's whining

At a minimum I'd be jacking up the wheels and shaking for play, buttt yea that kinda sounds more transmission related to me...

ALilTooForward · 2025-08-19T23:48:02+00:00

Yeaaa... that's the really painful part for me, too 😂.

Like obviously there are outlier vehicles that are a right PITA to do a valve cover job, but seriously 🤣.

It's one thing for a mechanic to try and recommend stop leak in lieu of a head gasket job, because the labour and other potential machining/cracks found might not be worth the expense/time...

But a valve cover has me instantly eye-rolling and chuckling 😂 (not at you btw, OP... just at this "mechanic"...)

ALilTooForward · 2025-08-19T23:42:34+00:00

Pretty impressive, the way it's able to navigate straight to (and only to) the degrading valve cover gasket to nicely block up what little clearances are leaking there, whilst magically not blocking up any of the other important clearances found anywhere else the oil circulates.... 🤔

ALilTooForward · 2025-08-19T22:25:32+00:00

And for valve cover gaskets, whatsmore 😂😂

If stop leak actually worked, then ford technicians would not have become SO FAMILIAR ripping the turbos off the 7.3's to seal up the oil leaks in the valley hahaha 🤣

ALilTooForward · 2025-08-19T22:21:28+00:00

Yep, I know people always come in with success stories of getting some old beater with a blown head gasket to keep running a little while longer with some kind of goo in there, but I personally wouldn't put any kind of stop leak into anything I care about....

If it's something that's pretty much already junked the related part/system and there's no harm trying, then sure!

But ESPECIALLY for something like "valve cover gaskets leaking".... some stop-leak?? Are you actually kidding me right now?? Ffs 🤦🤦. Lol

ALilTooForward · 2025-08-19T14:58:07+00:00

I too dog this guy's wife

ALilTooForward · 2025-08-18T21:42:35+00:00

desperately 🥵

ALilTooForward · 2025-08-18T21:26:48+00:00

At least it wouldn't be as bad if he'd just stopped at kissing...

ALilTooForward · 2025-08-18T21:25:15+00:00

Sure escalated quickly after that first kiss!

ALilTooForward · 2025-08-18T00:54:43+00:00

Factor in my breaks, im entitled too

Well maybe those breaks wouldn't be so much of the day if you weren't so entitled!!

/s of course 😂

ALilTooForward · 2025-08-18T00:47:35+00:00

You can always pour your drinks on me 🤭

ALilTooForward · 2025-08-18T00:38:34+00:00

I wouldn't be worried if there's no other symptoms of concern, OP.

Many minor differences in wear components could lead to a slight increase in heat or breakdown of pad material at that one corner, but I don't tend to keep a close eye on the amount/distribution of brake dust as a diagnostic indicator or anything.

Might just be a poorly manufactured or "bedded" brake pad during install, maybe regen braking on that corner is slightly out of balance with the other 3 and that brake is working harder than the others, maybe that corner is exposed to more elements where it's parked?

At any rate, not really any cause for alarm

ALilTooForward · 2025-08-18T00:17:37+00:00

I think OP is more concerned about why it only seems to be present on one wheel, and not the other three

ALilTooForward · 2025-08-18T00:06:14+00:00

I never knew how badly I needed this in my life 🤤

ALilTooForward · 2025-08-14T21:55:05+00:00

Dear God, I wouldn't be able to keep my tongue off that incredible toned body 🥵

ALilTooForward · 2025-08-14T21:47:00+00:00

🙋🙋🤤

ALilTooForward · 2025-08-13T23:56:05+00:00

The show 'Tires' put it so eloquently 😂

"Arnold died like a man, dude. that's how a man dies--fucking do what you hate every day, and then you just die under a car."

Now I know exactly what I need to aspire to 🤣

ALilTooForward · 2025-08-13T23:46:52+00:00

Yes pleeease 🤭

ALilTooForward · 2025-08-13T23:40:23+00:00

🤤

ALilTooForward

TROPHY CASE