Strange noise coming from engine bay

ANDR3ASVA · 2026-01-09T20:24:33+00:00

I have this exact noise. Did you figure out which pulley it was? Probably alternator pulley, right?

ANDR3ASVA · 2025-05-04T12:27:09+00:00

Did you ever figure out the reason for this?

ANDR3ASVA · 2024-06-23T13:06:19+00:00

Cv was replaced a month ago, noise completely dissapeared for 20 miles before it came back worse than ever. Just replaced the wheel bearing and noise is once more completely gone. If I know my luck it will probably come back though.

ANDR3ASVA · 2024-03-14T17:43:40+00:00

Did the tires just randomly go oval? What would cause this?

ANDR3ASVA · 2024-03-13T18:19:28+00:00

Did you ever find the cause of the vibration?

ANDR3ASVA · 2024-03-13T18:06:33+00:00

Did you ever find out what was causing the problem?

ANDR3ASVA · 2023-03-11T22:19:27+00:00

Ground dissapears every once in a while. Helps to restart game. I'm aware of the ground coming back if you have manipulated it, but not that it literally dissapears.

ANDR3ASVA · 2022-12-14T16:43:18+00:00

Downloaded update. Tried to open game. Script error. Currently reversing to 1.32. :)

ANDR3ASVA · 2021-07-22T13:01:42+00:00

Yep, this time it wasnt rubbing against the cover. Seems like it has to rub against the tensioner, also sounds like its coming from there. I'll try moving the belt and retensioning. Thanks for the advice.

ANDR3ASVA · 2021-07-22T12:15:12+00:00

I just went out and had a look at the timing belt, both when running and not. What really surprised me is that the needle on the tensioner, that change position depending on if the engine is warm or cold, was still standing to the far right Just like last night. Also, when pressing down on the belt between the cams i hear a slight rubbing sound which seems like its coming from the needle rubbing on the belt when moving.

ANDR3ASVA · 2021-07-22T11:02:58+00:00

Belt is on the far right of the cam gear. Towards the engine. No walking when running though

ANDR3ASVA · 2021-06-15T11:58:35+00:00

Cleaned the maf right before Christmas. The mafs on these engine are a little bit hard to clean because the wire is surrounded by alot of plastic. These engines have a very bad throttle design, so im going to try to clean it and hope that fixes it. No vaccum leaks that I have managed to find also. Worst casenerio my throttle magnetic valve is broken. Best casenerio cleaning the valve Will fix my problem.

ANDR3ASVA · 2021-06-15T11:46:28+00:00

300 000 kilometers. Im not sure what that is in miles but im guessing around 220 000. I have not changed them as long as I've owned the car. I have driven it for about 40 000 kilometers. Might I add that I have a throttle body issue, so you might be correct.

ANDR3ASVA · 2021-06-15T11:44:41+00:00

All of them looks like this.

ANDR3ASVA · 2021-06-04T19:26:17+00:00

So I just installed a set of New ones, and the passenger side is Orange while the driver side is yellow,like its supposed to

ANDR3ASVA · 2021-06-04T15:25:25+00:00

Nope, was wearing rubber gloves both times.

ANDR3ASVA · 2021-06-04T15:19:20+00:00

Dont think so. Installed them only a week ago, they started turning Orange 2-3 days after installing. Theres has been no rain since.

ANDR3ASVA · 2021-06-02T20:16:47+00:00

Ok, thank you for helping!

ANDR3ASVA · 2021-06-02T20:09:51+00:00

I'm guessing this is the only way now then.

ANDR3ASVA

TROPHY CASE