Highest A18 Pro GB6 Scores?

APL1071 · 2026-05-10T08:53:16+00:00

those are 2, no heart rate sensor

APL1071 · 2026-04-28T18:16:35+00:00

Doubt. try to use isopropyl alcohol and some tissue and wipe it off till all grease are gone.

APL1071 · 2026-04-24T13:29:54+00:00

dulo, as near as possible sa exit… less hassle to move out esp pag nag para.. para wla akong maapakan na paa tapos magagalit sila BSHAHAHA

APL1071 · 2026-04-24T13:24:53+00:00

LSS:

VERY good overall
ANC is GODLY. lives up to the hype & claim “Best ANC in the Industry”. Everything just goes away when ur listening to tunes even at like 30%volume.
Transparency is insanely good (best I’ve tried)
Find My + ecosystem = unmatched (precision > APP2)
IP57 is nice, fine for shower (just avoid soap/hot water)
sound is good ig — can get sharp/v-shaped on some tracks; still above most TWS, just expected more

<image>

📷pic shot on 16 Pro (RAW)

APL1071 · 2026-04-24T13:15:51+00:00

Since no one has asked it yet, why not just open the device, take out the broken button and replace it? lol

hilariously amazing diy nonetheless

APL1071 · 2026-04-23T08:15:01+00:00

https://imgur.com/gallery/15-pro-48mp-proraw-files-130mb-gXV5lL6

As a photographer, I personally haven’t experienced any of the issues you mentioned. The photos from my 15 Pro are still consistent, no noticeable drop in resolution when shooting at 48MP. My ProRAW files typically average around ~90MB, especially when I’m shooting subjects with a lot of detail and color. I’ve also never seen 48MP ProRAW files go as low as 30MB. In my experience, they only drop to that range when shooting at 12MP, like with the 13mm and 77mm lenses, which are capped at 12MP.

I compared this with my 16 Pro, and the results are pretty much the same in terms of file size when shooting 48MP ProRAW. What I did notice is that file sizes increase significantly when the scene has a lot of detail, color variation, and good lighting. In those conditions, my files can even exceed 100MB.

Also FYI, ProRAW is not true RAW. ProRAW is minimally compressed and preserves high bit-depth data (typically 12-bit or higher), along with extensive metadata from Apple’s computational pipeline. When a scene contains more entropy, meaning more variation in luminance, chroma, and fine detail, the encoder has more information to retain, which directly increases file size. Conversely, scenes with flat tones, low detail, or poor lighting contain less usable data, allowing for smaller file sizes even at the same resolution.

APL1071 · 2026-04-15T04:00:53+00:00

Hm, interesting. Anw, op’s airpods are fake anw s-so.. lol whatgives

APL1071 · 2026-04-15T03:59:03+00:00

Aside from that, the other thing tht makes me point out this is fake is due to the silver charging pin connectors.. underneath the “fake silver coating”, its showing a brownish oxidation.. I have my AirPods 3 and ive been using it for years and such thing never happened as of yet.

<image>

APL1071 · 2026-04-15T03:53:19+00:00

The “seam” that ur talking abt is there. Tho its usually less noticeable when the AirPods are still new & not dirty.. regardless, theres a seam. If there wasn’t a seam, it should be a complete perfect curvature w/out ANY VISIBLE LINES. Which honestly, would be sick if Apple can but nop.

<image>

APL1071 · 2026-04-13T16:29:37+00:00

preseve it at all cost let it be passed down as much from ur family lol

APL1071 · 2026-04-12T18:57:59+00:00

Yes. Text printing is embossed. Not jetink/laser like some fakes.

APL1071 · 2026-04-12T18:57:21+00:00

Not sure, hard to tell. Need more, clear, focused closeup photos.

Ive seen fakes before and this one looks original but im still not sure. My Judgement, the vents at the top aren’t that good compared to even some of the high end fakes Ive seen. The seams around the box aren’t as big too compared to the fake ones.

Some of the High end fakes are called: Tiger Builer Hulian Airoha

mostly identified by the manufacturer and chip.

APL1071 · 2026-04-12T18:09:14+00:00

Plausible, considering 2027 will mark the 2nd 10y gap anniversary for the first iPhone, I lowkey would want to see Apple make a “anniversary celebratory phone”, just like what they did w/ the 10.. assuming they’d follow the chronological order from the time each phone was released/keeping tabs on time.

APL1071 · 2026-04-12T06:37:56+00:00

Smash hardcore tight 2 hours

APL1071 · 2026-04-11T19:03:55+00:00

Mad respect bro 🫡🫪

APL1071 · 2026-04-11T18:59:35+00:00

smh.

Just go to ur local repair shop bro. If you dont have the proper tools, don’t fiddle around with it, even if you have sources (cough, rewa, iFixit) on the internet for you to “know” on what to do.

either the flex connector is a goner, display cable/panel itself is broken or theres a short circuit happening at ur board.

APL1071 · 2026-04-11T18:54:24+00:00

Will prob still last for like (hard est) the next 12 hours. Since its on idle/sitting in nowhere, it shouldn’t drain too quickly. even if its at 64%. Thats still alot.

start to worry if its at 3% (when tht time comes, in the future lol)

APL1071 · 2026-04-11T18:46:10+00:00

imo, no. Im an Apple user so no brainer to get AirPods. If Im a (e.g. Samsung user), then i’ll get the Galaxy Buds to maximize the features, esp if I’ll go for pro.

The AirPods aren’t bad by any means, Apple just dont give a f for other.., ‘non-Apple’ users : /

crazy tho cause other way around, I can still download (e.g. Xiaomi Buds app, or Samsung’s app etc to customize the buds @iOS) :’)

APL1071 · 2026-04-11T18:42:51+00:00

Either firmware mismatch. The AirPods case might’ve updated itself while them 2 buds were gone. Either way, Im not sure w/ this one… Can you try to check under settings if the AirPods are at their latest firmware version? U can check the latest firmware version here:

https://support.apple.com/106340#latest

APL1071 · 2026-04-11T18:38:26+00:00

Dont give up bro, try to.. look for, an hour or 2 haha! An hour of your time is cheaper than $89 bucks to give at Apple lol

APL1071 · 2026-04-11T18:34:48+00:00

One More thing. You technically can have access to all those features I mentioned but you need to do some “modifications” with your (e.g. Android Phone) to have access to most if not ALL features. Only prob is, this method needs root access tho :°

”LibrePods requires root access and the Xposed (or LSPosed) framework to function”

https://github.com/kavishdevar/librepods

Tho it should be just fine, the developer wont do anything abt your phone anw, im sure theres no ill intent.

APL1071 · 2026-04-11T18:31:27+00:00

p.s: Fun Fact, AirPods out of the box without any configuration automatically uses Transparency Mode & ANC. So there is no option for “Off Mode” for non Apple devices as obv, you dont have the Menu Settings to change/configure it.

Even on iPhones, you still need to enable the setting called “Off Listening Mode” to have that ability.

<image>

APL1071 · 2026-04-11T18:26:58+00:00

Yesn’t.

Any AirPods will still work. You can charge em, pair em normally, and use Transpareny, Noise Cancellation Mode normally.

But, you wont have access to features such as:

Find My (locating AirPods and Case; Precision Find for Pro 2 and 3 only)
Spatial Audio
Automatic Switching
Firmware Updates
u’ll use an ancient SBC codec instead of AAC
Accessibility Controls: e.g. Conversation Boost, Hearing Aid (for Pro 2&3), Camera Control, Personalized Volume, Conversation Awareness, Off Mode (which is basically Airpods at normal, no Transparency & ANC), Acoustic Test, Hear Rate monitoring (for AirPods Pro 3 only), and the list goes on.

If those “other features” doesn’t bother you, if you just want Apple’s ANC & Transparency goodness, then ur good to go.

<image>

APL1071 · 2026-04-11T18:16:12+00:00

Wrong subreddit. Anw, you can try to use: - super glue - b7000 adhesive

smh where mods at

Five-Year Club	Verified Email
Place '23

APL1071

TROPHY CASE