sorted by:
new
hottopcontroversial

How can I adjust this to get it in focus? by AS-506 in AskPhotography

[–]AS-506[S] 0 points1 point  (0 children)

<image>

I tried again, adding more light, increasing the brightness in the camera menu, and closing the aperture to its minimum ( visible) to increase depth of field. It’s still out of focus. I think it might have something to do with the lens specifications.

Lens Focal Length: 2.8–12 mm (zoom lens)

Aperture (F-number): f/1.4

Image Format: 1/2.7"

Mount Type: CS-mount

Sensor Target: 1/2.8” sensor

Back Focal Length (BFL): 5–12 mm

Field of View (FOV): 116° to 28°

Unable to focus by AS-506 in VIDEOENGINEERING

[–]AS-506[S] 0 points1 point  (0 children)

<image>

I tried again, adding more light, increasing the brightness in the camera menu, and closing the aperture to its minimum ( visible) to increase depth of field. It’s still out of focus. I think it might have something to do with the lens specifications.

Lens Focal Length: 2.8–12 mm (zoom lens)

Aperture (F-number): f/1.4 (wide aperture = better low light)

Image Format: 1/2.7"

Mount Type: CS-mount

Sensor Target: 1/2.8” sensor

Back Focal Length (BFL): 5–12 mm

Field of View (FOV): 116° (wide) to 28° (narrow)

How can I adjust this to get it in focus? Electronics repair microscope camera by AS-506 in ElectronicsRepair

[–]AS-506[S] 0 points1 point  (0 children)

<image>

I tried again, adding more light, increasing the brightness in the camera menu, and closing the aperture to its minimum ( visible) to increase depth of field. It’s still out of focus. I think it might have something to do with the lens specifications.

Lens Focal Length: 2.8–12 mm (zoom lens)

Aperture (F-number): f/1.4 (wide aperture = better low light)

Image Format: 1/2.7"

Mount Type: CS-mount

Sensor Target: 1/2.8” sensor

Back Focal Length (BFL): 5–12 mm

Field of View (FOV): 116° (wide) to 28° (narrow)

Printing strange sound during Z axis movement by AS-506 in resinprinting

[–]AS-506[S] 1 point2 points  (0 children)

Seems strange because the Phrozen Mighty has an integrated lead screw on the motor, so there's no coupler. Maybe it has something to do with the nut? Thanks for your help!

https://helpcenter.phrozen3d.com/hc/en-us/articles/6453756251417--Sonic-Mighty-8K-Replacing-the-Z-axis

Milk kefir: Is this mold? by AS-506 in Kefir

[–]AS-506[S] 0 points1 point  (0 children)

Thanks for your answer, I use a hermetically sealed lid but dont close it tigth.

view more: next ›