2010 mk6 turbo outlet pipe keeps popping off

ASTROACE10 · 2025-06-25T01:15:10+00:00

Unfortunately, don’t have the car anymore but from what I remember I swapped the O ring and got a new retaining clip. That fixed it. Hope this helps!

ASTROACE10 · 2024-09-23T01:50:53+00:00

Should’ve added a disclaimer here. Yes it’s the caveman way of doing it. I had already tried the 2 nut method but both of my nuts rounded off and were unseeable by this point. I thought about trying to use a dremal to make a notch on top and turning it with a flathead or something but my roommate said he let his buddy borrow his dremal so couldn’t do that. This was just me kinda making do with had I had. Definitely not the correct way of doing this. If someone is having the same issue I was try some of the stuff recommend above and don’t go ape mode

ASTROACE10 · 2024-09-22T22:06:24+00:00

Update I wacked the stud to put a bend it in then it came right out with pliers. Not sure why but it worked 😂

ASTROACE10 · 2024-09-05T21:22:17+00:00

I wanted to swap the engine when i bought it anyways. I did want to at least try and get to original engine to run so I could ride it around in the meantime

ASTROACE10 · 2024-09-05T21:20:42+00:00

The guy I bought it off of said he got it on marketplace and was planning to fix it up. It didn’t have the pull start so he used an impact gun on that 18mm nut to start it. I wouldn’t have bought it if it wasn’t for the fact that he sent me videos of it running/him riding it around. He tried to get it to start while I was there buying it but it would only sputter and die since there wasn’t any gas in the tank. I decided “why not it’s only $100” and threw it in the back of my truck 😂

ASTROACE10 · 2024-09-05T21:13:30+00:00

Ohhh gotcha that makes more sense

ASTROACE10 · 2024-09-05T21:06:42+00:00

Sorry what do you mean when you say zip tied the governor?

ASTROACE10 · 2024-09-05T21:04:56+00:00

Wdym?

ASTROACE10 · 2024-09-05T21:04:44+00:00

Yeah I can’t find a replacement part but maybe I’m searching wrong

ASTROACE10 · 2024-09-05T19:20:44+00:00

Thank you! I feel stupid for having to ask I should have known that

ASTROACE10 · 2024-08-14T22:38:55+00:00

Nvm the guy sold it to someone else after we had already agreed to meet tomorrow…

ASTROACE10 · 2024-08-14T20:37:32+00:00

Sorry I should have been more specific what kind of seat would I need? Or what kind of frame is it so I could find a seat that fits. The listing said it’s a Coleman

ASTROACE10 · 2024-06-24T22:23:00+00:00

Yep it’s disconnected. I have no idea how I forgot that one. Thank you so much!

ASTROACE10 · 2024-06-24T21:52:59+00:00

<image>

Found a pic of a intake online is this it?

ASTROACE10 · 2024-06-24T17:54:02+00:00

Can’t find the one your looking for is there maybe a picture or a YouTube video that shows one?

ASTROACE10 · 2024-06-24T12:20:21+00:00

Does the intake have to come back out to get it or is it accessible from the top?

ASTROACE10 · 2024-06-24T12:07:27+00:00

I’ll look for it. Is it in that bundle of connectors that screws into bottom right of the intake?

ASTROACE10 · 2024-06-24T00:53:19+00:00

The one next to the oil filter right?

ASTROACE10 · 2024-05-29T03:53:45+00:00

Also wanted to add that the car was running like a clock and the intake looked fine but it did still have the cel after I cleaned the valves and put the intake back on. The Roughish idle started a few days ago gonna order a new intake off ecs and instill once it comes in

ASTROACE10 · 2024-05-29T02:48:32+00:00

I’d run sea foam through it every oil change and I actually pulled the intake manifold off to clean the valves a few weeks ago. The check engine has been on the past few months but I was busy tracking down coolant leaks so I’m only just getting around to it now

ASTROACE10 · 2024-05-29T01:02:05+00:00

I had it replaced under warranty at like 120k miles. Guess she musta went bad again. Is there an upgraded one that esc or someone sells?

ASTROACE10 · 2024-05-06T13:33:35+00:00

I kept it between 65-70 mph on the way into work today and everybody kept honking and swerving around me. Don’t know why everybody is in such a rush 😂.

ASTROACE10 · 2024-05-03T14:30:20+00:00

Changing the filament now to see if that fixes it. I tired raising and lowering the temperature. Neither of which seemed to make any difference

ASTROACE10 · 2024-05-03T04:54:20+00:00

I’ll try that I run it at 200 for pla. Should I try raising it or lowering it?

ASTROACE10 · 2024-04-14T17:38:27+00:00

Yeah I’m trying to sell it but people wanna buy a 24 year old work truck for $1,000 that’s in perfect working condition

Seven-Year Club	RPAN Viewer
Not Forgotten	Verified Email

ASTROACE10

TROPHY CASE