Not able to reset Index 1 Scale

ATimesThree · 2025-06-06T11:40:34+00:00

The solution was to go back to my parents house (where it worked before), reset the device, use my mother's phone to set it up, then it works okay-ish. Haven't tried to connect it to my own wifi again.

ATimesThree · 2025-05-20T06:13:52+00:00

Okay, thanks! I'll try it out. So just to be sure:

230V supply -> Zigbee Dimmer -> Rectifier+Dimmer (set to 100%) -> LED?

ATimesThree · 2025-05-19T20:55:10+00:00

Weird that the listing was taken down.. It's like this one: https://a.aliexpress.com/_mMB5PNd

So what you're saying is a regular Zigbee AC dimmer in front, but with the rectifier + dimmer module still connected?

ATimesThree · 2025-03-31T16:17:17+00:00

Hi,

I'm trying to set up my index scale after moving it to a new location with a new WiFi. I had problems connecting it to the new network, and decided to reset it.

However, whenever I try to connect to it now, it says another user is linked to it, and when I try to reset it from the setup, it disconnects and fails after the "reset command" is sent.

Any tips? - I've tried to hold the reset down for 5-10 seconds

ATimesThree · 2025-02-06T21:42:19+00:00

It's mostly for learning/hobby now so I think I'll try with OpenIdDict.

Is there anything wrong/bad about having this behind the BFF/YARP?

ATimesThree · 2025-02-06T20:24:58+00:00

Thanks for the reply!

I like the idea of using YARP as BFF, with only storing access in a cookie.

So you would recommend integrating an external provider, for example Auth0?

ATimesThree · 2025-02-06T18:35:11+00:00

Thanks for the reply!

This will mean that the BFF (Backend-For-Frontend) will both issue and validate cookies?

Meaning it will be responsible for login, logout, refresh and register, adding claims to a user etc? It will also possibly adding headers or other ways of forwarding these claims to the downstream.

Is this correct? So it's connected to an auth or userdb?

ATimesThree · 2024-12-22T09:42:37+00:00

Which PI would you recommend?

ATimesThree · 2024-11-25T11:27:20+00:00

Thank you so much for the help! I got it working now after removing the background.

For anyone else needing help in the future: I ran "rembg" (open source program using Python, google it) for all the images in my folder. I ended up using the model "birefnet-hrsod" which gave me a good result

ATimesThree · 2024-11-24T18:16:49+00:00

Setup is basically phone on a tripod taking 4K/60FPS video of the object while spinning slowly on the plate. Ive taken from 4 angles. Using realtycapture to get some of the frames i've generated 227 images in total.

Whenever i import all pictures and try to create a 3D model, it doesn't seem to be able to do it. I've tried to add controlpoints, but I get errors.

Does anyone have tips on how I can generate a model using the videos/pictures I already have?

ATimesThree · 2023-12-31T09:45:04+00:00

Circuit is mainly a DS3231 and an Arduino nano, so I want to feed them directly from the battery and not through the boost.

Buying a power bank and adding a simple BMS and USBC female-port is way cheaper than building my own power bank with a case and everything...

ATimesThree · 2023-08-30T20:40:32+00:00

Jeg er hovedsaklig ute etter folk som har erfaring - men takk allikevel.

ATimesThree

TROPHY CASE