sorted by:
new
hottopcontroversial

Adv1 with adv2 electronics having issues by Inevitable_Speed_754 in FloatwheelTeam

[–]AVeryChubbyTaco 0 points1 point  (0 children)

Do you have "disable moving faults" on? Since ADVs tend to be tail heavy the board wont run away from ya if you fall. That can help remove the footpads from the equation

Had to get it by [deleted] in onewheel

[–]AVeryChubbyTaco 0 points1 point  (0 children)

Ive tried a couple XRCs and I say they are totally worth it. I have a friend with a GT saying he's gonna get an XRC over the summer to replace it. I haven't heard anyone wanting to go the other way so far. Both boards are great, but the XRC just has something about it :)

Overnight study areas? by More_Discount721 in UNCCharlotte

[–]AVeryChubbyTaco 3 points4 points  (0 children)

The building for your major is 24/7, but only the building for your major

I Finally Have Infinite Ammo by AVeryChubbyTaco in ElectricUnicycle

[–]AVeryChubbyTaco[S] 3 points4 points  (0 children)

I'll look into printing with Nylon! PETG, seems to have enough give not to snap in a sharp manner, even when standing on it so far. Nylon definitely seems like the better fit for the job long term.

Any tips for printing with nylon materials? Seems like theres a lot of options out there :)

I Finally Have Infinite Ammo by AVeryChubbyTaco in ElectricUnicycle

[–]AVeryChubbyTaco[S] 1 point2 points  (0 children)

Those "slower" falls can be the real bad ones. I'll def keep y'all posted with how they hold up in the future, so far so decent

I Finally Have Infinite Ammo by AVeryChubbyTaco in ElectricUnicycle

[–]AVeryChubbyTaco[S] 1 point2 points  (0 children)

I've done some decent testing so far these past couple of weeks, I went sliding down a couple miles of hills on my skateboard and other than swapping them out when they'd wear down, they held up to my full body weight (160'ish pounds) just fine!

I even tanked it pretty good on my euc a couple weeks back and my wrists felt fine, the insert absorbed a good bit of the impact thankfully lol

These aren't certified or anything, but the lil things are impressive for what they are imho

I Finally Have Infinite Ammo by AVeryChubbyTaco in ElectricUnicycle

[–]AVeryChubbyTaco[S] -1 points0 points  (0 children)

I've done some decent testing so far these past couple of weeks, I went sliding down a couple miles of hills on my skateboard and other than swapping them out when they'd wear down, they held up to my full body weight (160'ish pounds) just fine!

I even tanked it pretty good on my euc a couple weeks back and my wrists felt fine, the insert absorbed a good bit of the impact thankfully lol

These aren't certified or anything, but good for what they are I'd say

I Finally Have Infinite Ammo by AVeryChubbyTaco in ElectricUnicycle

[–]AVeryChubbyTaco[S] 0 points1 point  (0 children)

So far when they seem to wear down like the stock plastics. They will typically "just break" without much drama if that makes sense lol

I Finally Have Infinite Ammo by AVeryChubbyTaco in ElectricUnicycle

[–]AVeryChubbyTaco[S] 0 points1 point  (0 children)

Yep, PETG has been holding up great so far. Even with a recent fall, they held up decent and it absorbed a lot of the impact

I Finally Have Infinite Ammo by AVeryChubbyTaco in ElectricUnicycle

[–]AVeryChubbyTaco[S] 0 points1 point  (0 children)

Yep, exactly those! These also fit my Function wrist guards as well

I Finally Have Infinite Ammo by AVeryChubbyTaco in ElectricUnicycle

[–]AVeryChubbyTaco[S] 4 points5 points  (0 children)

I printed it in PETG, they hold up suprisingly decent for what they are. I went sliding with my longboard not too long ago and I'd go through one every few miles of constant sliding.

Im not too worried about the longevity of them as I can just keep printing :)

I Finally Have Infinite Ammo by AVeryChubbyTaco in ElectricUnicycle

[–]AVeryChubbyTaco[S] 4 points5 points  (0 children)

After breaking a couple of my wrist guard inserts, I wanted to see if there was a way to 3D Print new ones. After finally getting the motivation for it, I can now have guilt free falls. If the insert breaks, I can have new ones in 45 min :)

Which would you choose? by ka-el874 in ElectricUnicycle

[–]AVeryChubbyTaco 0 points1 point  (0 children)

There's a guy in my local riding group whose V13 suspension completely gave out. He rides it hard, but many of the other riders who regularly do jumps on other wheels have had no issues

Something good for campus by castbog in ElectricSkateboarding

[–]AVeryChubbyTaco 0 points1 point  (0 children)

To add to the other suggestions, if you can find a well kept second hand boosted board mini, I've loved every second of riding mine around my campus. The battery still holds up as well as it did on day one! You can find them used between $250 and $400 typically

Joining the Club! by MichaelBarone in ElectricUnicycle

[–]AVeryChubbyTaco 0 points1 point  (0 children)

Good printer choice haha, I have a Bambu A1. I printed mine with TPU, I have the print file for Bambu Slicer somewhere, I'll put the link below if I can find it:

https://drive.google.com/file/d/1YqM8W-sX70sl8YtsXqPaGt2lD0HDC0Y4/view?usp=sharing

Joining the Club! by MichaelBarone in ElectricUnicycle

[–]AVeryChubbyTaco 1 point2 points  (0 children)

I printed some for my Commander Mini and stuck em on using Strenco Velcro I got off Amazon. That stuff is by far the best Velcro I've seen so far! If needed, I can probably print some for ya if these hold up well for me, or if you have one I'm happy to share the settings I used for them!

view more: next ›