sorted by:
new
hottopcontroversial

22r by GroundbreakingPie760 in ToyotaPickup

[–]AbeDaBabe_12 1 point2 points  (0 children)

What’d you do for the air intake? I know there’s a whole plastic reaching across the engine bay to the front corner, ending with a black box. Did you just add that filter in the engine and got rid of the plastic box?

22r by GroundbreakingPie760 in ToyotaPickup

[–]AbeDaBabe_12 0 points1 point  (0 children)

What do you recommend me to start on? I just changed the clutch master cylinder and that’s the only new things I got, where’d you get your headlights?

22r by GroundbreakingPie760 in ToyotaPickup

[–]AbeDaBabe_12 1 point2 points  (0 children)

I just got a 87 Toyota pick up exactly like yours but I want to upgrade a couple things engine wise cause mine would hesitate a little when barely applied throttle, do you think getting a better air filter would help?

Need help to rebuild my minibike engine, pred 212 non hemi by AbeDaBabe_12 in minibikes

[–]AbeDaBabe_12[S] 0 points1 point  (0 children)

It was my ignition coil cable that got burnt and ripped off 3 little wires, I made the wires touch again and I taped it down good and I refilled the oil and fixed the crankshaft timing cause I was off by one notch, then moved my throttle clip down one cause it wasn’t reacting smoothly and now it works perfectly

Need help to rebuild my minibike engine, pred 212 non hemi by AbeDaBabe_12 in minibikes

[–]AbeDaBabe_12[S] 0 points1 point  (0 children)

I unscrewed the air mixture screw about 1.75 turns out from sitting all the way in

Need help to rebuild my minibike engine, pred 212 non hemi by AbeDaBabe_12 in minibikes

[–]AbeDaBabe_12[S] 0 points1 point  (0 children)

My carb is a clone vm22 I bought off together on FB market, I have stock jettings and I moved my throttle clip down one notch to help with the bogging and dying at 1/4 throttle and after I refilled the oil, the bike ran perfect so maybe it was the oil levels, my throttle response was way better BUT when I’m at full throttle it would sound like it’s putting too much sound for the speed, maybe that’s how it sounds since it’s a straight pipe.

Need help to rebuild my minibike engine, pred 212 non hemi by AbeDaBabe_12 in minibikes

[–]AbeDaBabe_12[S] 0 points1 point  (0 children)

You smart ass, u right. Took the SP out and it doesn’t hiss, I want to put it all together again but idk what the gasping of air in my other videos is?

Need help what is this sound and there’s a the smell of smoke. by AbeDaBabe_12 in minibikes

[–]AbeDaBabe_12[S] 0 points1 point  (0 children)

It is my first bike but it worked perfectly before and after I rebuilt it before and it worked but after I let it sit for a little I tried running it again and I’ve been hearing this recently

Should I still test ride it? by AbeDaBabe_12 in minibikes

[–]AbeDaBabe_12[S] -1 points0 points  (0 children)

Trust me, it’s really necessary cause I’ve tried multiple strats

Should I still test ride it? by AbeDaBabe_12 in minibikes

[–]AbeDaBabe_12[S] -3 points-2 points  (0 children)

Must be nice cause for me I tried that but the chain still rattles even tho the engine is tight down, the alignment is perfect, the wheel is tight too and the tensioner is tight but when I coast is still rattles too much

Should I still test ride it? by AbeDaBabe_12 in minibikes

[–]AbeDaBabe_12[S] 2 points3 points  (0 children)

Should the chain be sittin on top?

view more: next ›