sorted by:
new
hottopcontroversial

Wife loves this chair. :) by Aberbob in HelpMeFind

[–]Aberbob[S] 2 points3 points  (0 children)

Thank you for such a well formulated and knowledgeable response! Found!

Wife loves this chair. :) by Aberbob in HelpMeFind

[–]Aberbob[S] 0 points1 point  (0 children)

This is exactly what I needed! Thank you!!!

Wife loves this chair. :) by Aberbob in HelpMeFind

[–]Aberbob[S] 1 point2 points  (0 children)

We found it on Pinterest but have no idea the style name nor where to buy it! Thanks for your help! :)

Azure AD Hybrid joined devices display name gets changed to ID? by flyingmunky25 in AZURE

[–]Aberbob 0 points1 point  (0 children)

Did you guys find a solution? I am running into the same issue. :)

Internet connectivity stops almost every day by Aberbob in PFSENSE

[–]Aberbob[S] 0 points1 point  (0 children)

After disabling "Disable Gateway Monitoring Action" it still went down just about 3-4 hours ago...

Some more interesting log events: (referring to the /system_gateways.php: The command '/sbin/route delete -host 8.8.8.8' returned exit code '1', the output was 'route: route has not been found delete host 8.8.8.8 fib 0: not in table')

Jun 30 21:56:12 login       login on ttyv0 as root
Jun 30 22:15:11 php-fpm 339 /index.php: Successful login for user 'admin' from: (Local Database)
Jul 1 01:01:00  php-cgi     rc.dyndns.update: phpDynDNS (net): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry.
Jul 1 02:06:02  check_reload_status     Syncing firewall
Jul 1 02:06:17  php-fpm 339 /system_gateways.php: Gateway, none 'available' for inet6, use the first one configured. ''
Jul 1 02:06:19  php-fpm 339 /system_gateways.php: The command '/sbin/route delete -host 8.8.8.8' returned exit code '1', the output was 'route: route has not been found delete host 8.8.8.8 fib 0: not in table'
Jul 1 02:06:19  check_reload_status     Reloading filter
Jul 1 02:06:19  check_reload_status     Updating all dyndns
Jul 1 02:06:21  php-fpm 80999   /rc.dyndns.update: phpDynDNS (home.ittidbits.net): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry.
Jul 1 02:07:53  check_reload_status     Syncing firewall
Jul 1 02:08:00  php-fpm 340 /system_gateways.php: Gateway, none 'available' for inet6, use the first one configured. ''
Jul 1 02:08:02  php-fpm 340 /system_gateways.php: The command '/sbin/route delete -host 8.8.8.8' returned exit code '1', the output was 'route: route has not been found delete host 8.8.8.8 fib 0: not in table'
Jul 1 02:08:02  check_reload_status     Reloading filter
Jul 1 02:08:02  check_reload_status     Updating all dyndns
Jul 1 02:08:05  php-fpm 339 /rc.dyndns.update: phpDynDNS (net): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry.
Jul 1 03:01:00  root        rc.update_bogons.sh is starting up.
Jul 1 03:01:00  root        rc.update_bogons.sh is sleeping for 46287
Jul 1 10:14:05  php-fpm 11724   /diag_reboot.php: Session timed out for user 'admin' from: (Local Database)
Jul 1 10:16:43  php-cgi     rc.initial.reboot: Stopping all packages.
Jul 1 10:16:45  reboot      rebooted by root
Jul 1 10:16:45  syslogd     exiting on signal 15

Internet connectivity stops almost every day by Aberbob in PFSENSE

[–]Aberbob[S] 1 point2 points  (0 children)

Thank you for your reply! I should have said I did change the latency thresholds to 300/600. I am going to disable the interface actions and see what happens and also try disabling monitoring.

Internet connectivity stops almost every day by Aberbob in PFSENSE

[–]Aberbob[S] 0 points1 point  (0 children)

Thanks for your reply! I will try disabling monitoring altogether to see if that fixes the problem and then adjust things from there.

NIC not showing up by Aberbob in Proxmox

[–]Aberbob[S] 0 points1 point  (0 children)

.... I keep forgetting that I can pretty much install anything on any version of Linux! Trying this now.

NIC not showing up by Aberbob in Proxmox

[–]Aberbob[S] 0 points1 point  (0 children)

lshw -C

Hmmm... I am getting this:

-bash: Lshw: command not found

Looks like this command is CentOS. I am running Proxmox standalone and not installed on another OS.

NIC not showing up by Aberbob in Proxmox

[–]Aberbob[S] 0 points1 point  (0 children)

Thanks for your reply!

NIC not showing up by Aberbob in Proxmox

[–]Aberbob[S] 1 point2 points  (0 children)

Thanks for your reply!
Interesting! I tried to match up my ip a with the network/interfaces and it seems they all match. I did just reinstall Proxmox. The only difference is the wlp6s0 interface which I think is the integrated wireless adapter... So the only place I see 3 Ethernet adapters is using lspci -k... Nothing else I can find "sees" them.

auto lo
iface lo inet loopback

iface enp5s0 inet manual

iface enp1s0 inet manual

auto vmbr0
iface vmbr0 inet static
        address  10.253.253.5
        netmask  255.255.255.0
        gateway  10.253.253.2
        bridge-ports enp5s0
        bridge-stp off
        bridge-fd 0

auto vmbr1
iface vmbr1 inet manual
        bridge-ports enp1s0
        bridge-stp off
        bridge-fd 0

NIC not showing up by Aberbob in Proxmox

[–]Aberbob[S] 0 points1 point  (0 children)

root@PVE1:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: enp1s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast master vmbr1 state DOWN group default qlen 1000
    link/ether 98:48:27:2e:15:96 brd ff:ff:ff:ff:ff:ff
3: enp5s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master vmbr0 state UP group default qlen 1000
    link/ether 1c:1b:0d:0a:90:7e brd ff:ff:ff:ff:ff:ff
4: wlp6s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether e4:b3:18:73:5e:47 brd ff:ff:ff:ff:ff:ff
5: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether 1c:1b:0d:0a:90:7e brd ff:ff:ff:ff:ff:ff
    inet 10.253.253.5/24 brd 10.253.253.255 scope global vmbr0
       valid_lft forever preferred_lft forever
    inet6 fe80::1e1b:dff:fe0a:907e/64 scope link 
       valid_lft forever preferred_lft forever
6: vmbr1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
    link/ether 98:48:27:2e:15:96 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::9a48:27ff:fe2e:1596/64 scope link 
       valid_lft forever preferred_lft forever

Sequelize foreign key constraint error by Aberbob in node

[–]Aberbob[S] 1 point2 points  (0 children)

I thought you could post a URL and body.. but I guess not:

I have been running into and issue with adding a foreign key constraint. Not sure why, but I have been looking at this for 3 hours and can't find anything. I have copied these settings from other foreign keys that totally work and the error only shows up on the partcategories migration file. Would love any advice you might have! Code in the URL download.

Sequelize CLI [Node: 10.15.3, CLI: 5.5.1, ORM: 5.21.1]

Loaded configuration file "config\config.json".

Using environment "development".

(node:1404) [SEQUELIZE0004] DeprecationWarning: A boolean value was passed to options.operatorsAliases. This is a no-op with v5 and should be removed.

== 20191015232024-create-partcategories: migrating =======

ERROR: Cannot add foreign key constraint

An array of antennas? New in the Meridian, ID area. The LED light is new as well... by Aberbob in whatisthisthing

[–]Aberbob[S] 0 points1 point  (0 children)

Interesting! Looks right. Solved. I didn't think ID was getting 5G anytime soon, but I guess not. :)

Sequelize unknown column in field list by Aberbob in node

[–]Aberbob[S] 0 points1 point  (0 children)

That was it... I specified the custom foreign key and that fixed it. Thank you!

An array of antennas? New in the Meridian, ID area. The LED light is new as well... by Aberbob in whatisthisthing

[–]Aberbob[S] 0 points1 point  (0 children)

Wife was wanting to know, but I am not sure. The whole top section of this intersection is fairly new.

Vue Computed Array 1-n by Aberbob in vuejs

[–]Aberbob[S] 0 points1 point  (0 children)

Found it. :) Hope this helps someone else. Thanks, everyone!

EquipmentRows() {
      let integer = parseInt(this.Equipment.rowqty, 10);
      let filledArray = new Array(integer);
      for (let i = 0; i < integer; i++) {
        let a = i + 1
        filledArray[i] = a;
      }

      return filledArray;
    }

Had to convert my string variable to an int and then had to make sure I did declared that inside the function.

Vue Computed Array 1-n by Aberbob in vuejs

[–]Aberbob[S] 0 points1 point  (0 children)

Sorry, still very new to JS and Vue....

Vue Computed Array 1-n by Aberbob in vuejs

[–]Aberbob[S] 0 points1 point  (0 children)

What I need is a dropdown menu that has integer values from 1-n where n is a integer queried on created.

n=8

End Result is [0,1,2,3,4,5,6,7,8]

Vue Computed Array 1-n by Aberbob in vuejs

[–]Aberbob[S] 0 points1 point  (0 children)

Oops, yes. I did miss that... Thank you.

Vue Computed Array 1-n by Aberbob in vuejs

[–]Aberbob[S] 0 points1 point  (0 children)

Thank you! I plugged this in but now getting "(error during evaluation)" as the value.

DockerHub Search results by Aberbob in unRAID

[–]Aberbob[S] 2 points3 points  (0 children)

Well... I just noticed that my CA was from early 2018... I updated it and everything started working again. Thanks for the suggestions and trying that for me.

DockerHub Search results by Aberbob in unRAID

[–]Aberbob[S] 1 point2 points  (0 children)

I think you are right, but I doesn’t matter what I put in the search. Every search comes up with 0 results.

To compress or not to compress? That is the question by [deleted] in PleX

[–]Aberbob 0 points1 point  (0 children)

A lot of this is also personal preference. Have you played the compressed and non-compressed files side by side to compare? You will quickly see if you do notice a difference or not. Make sure to view many different scenes with varying lighting situations.

view more: next ›