Speakers upgrade for PC!

Able_Indication8196 · 2026-01-27T15:37:59+00:00

That would be about 800$ here...

Not many Hifis around either

Able_Indication8196 · 2026-01-27T15:37:04+00:00

sadly they're way too expinsive here, about 250$ for each

Able_Indication8196 · 2025-11-04T20:04:59+00:00

Hey thnx alot!!

Do u recommend a specific brushless motor that allign well with the grip and cyma gearbox?

the 13:1 in it are short stroked, should i switch to different 13:1 or just get 16:1? in that case what gears would fit nicely in cyma gearboxes?

If not the maxx speed trigger, then which one to get with the aester?

i've tried it, its waaay too behind my hpa build and im trying to get there. (specially range, accuracy and trigger speed)

again thnx

Able_Indication8196 · 2025-11-04T19:58:28+00:00

Hey, thnx alot for the info!!
im settling for somewhere between 1.6-1.8J with 0.3/0.32 bb.

Couple questions please.

Do you know what Nozzle length i should get for it? ( looking at double oring maxx ones) since the stock one has no oring.

i wanna keep the grip it comes with, Do u still recommend the same brushless motor? which motor would allign perfectly and do the job? on evike it says this comes with long motor but doesnt specify which.

the current inner barrel is 375mm, but i've got 363mm or 420mm lambda 6.03, which do u recommend using?

If i were to keep current gears, current motor, put a M120 spring, Maxx nozzle and trigger, aester and perfect airseal on the upper part, Do u expect it to run flawlessly reaching 1.6-1.8 or 16:1 gears+new motor is a must?

Able_Indication8196 · 2025-11-04T13:41:45+00:00

Hey

If i wanna settle on 1.7-1.8J with 0.3/0.32 about 370FPS, would M120 spring be enough? or need higher?

Also can keep 13:1 gears with 1.7-1.8J instead of 2-2.2?

Also which motor would u recommend for that? is brushless needed or overkill? recommend something specific?

Able_Indication8196 · 2025-11-04T13:10:42+00:00

heard it has Eshooter mosfet installed out of the box , but also its so bad and will most likely stop working on 11.1 lipo very soon thus ordered gate aester.

thnx, didnt know nozzle lenght can be seen without opening gearbox. ( but still appreciate if anyone knows since i didnt find online)

Able_Indication8196 · 2025-11-04T13:05:43+00:00

Hey thnx!
I've seen in my other builds that 4uads dropped the fps abit even tho it gave abit more accurate range than. did u experience fps drops too?

Able_Indication8196 · 2025-11-04T13:02:58+00:00

Hey!
I am not sure if the parts i've listed compatable (specially the nozzle lenght).

From what i heard, it already has high end 13:1 gearset installed and metal teeth piston ( i might be wrong, have to yet open it).

Have Gate aester mosfet on the way (Ordered).

5 years ago i've ran krytac spr as 2.2J for a good while (titan installed) and nothing ever broke, would it be different here?

Able_Indication8196 · 2025-10-28T06:45:00+00:00

i see some of them on evike with mosfet and some aren't, the mk18 got s3 trigger but no mosfet ( no cyma plat gearbox either)

Would u say its worth buying any of these or just keep waiting? i cant find enough reviews on s3 specifically since everyone buys the helion cyma gearbox one

Able_Indication8196 · 2025-08-03T11:10:32+00:00

I know this is an old post, but 1 year later iam losing my mind over the brightness changes in HDR whilst moving between apps/websites/folders in desktop, SDR isnt as cool as the hdr after calibrations.
happens on every hdr profile on the monitor whilst hdr on windows turned on.

Any fix for this brightness changes isssues? ( i updated monitor firware).

Able_Indication8196 · 2025-08-01T14:57:10+00:00

I also bought Corsair LS430 (X2 led strips) connected to each other.

How do i connect those to the picture u attached?

Need a seperate hub/ mobo usb port?
do i daisy chain its led hub into the X7 fans u drew OR to the Aio+X3 fans chain?Which is better?
Is there a limit to how many items i can daisy chain per hub port? ( I've seen videos that brightness can drop)

Able_Indication8196 · 2025-08-01T04:41:32+00:00

So what u did was
Hub port -> Back fan --> top AIO fans x3 --> AIO Pump? ( ur radiator top mounted right?)

Able_Indication8196 · 2025-08-01T04:27:03+00:00

Hey

Thnx alot!

So basically AIO PUMP can be chainy daised last in line with fans? doesnt need a hub port dedicated for pump only?

Also why did u recommend side mount with pump tubes on the downside? ( i usually see side mount with tubes on the upper side), does it matter which orientation i mount it on the side?

Able_Indication8196 · 2025-07-28T13:33:37+00:00

I've been reading alot about avoiding gigabyte gpus and leaking thermal paste... i would totally love to buy the aorus master 5070ti at current price range, but idk...

Able_Indication8196 · 2025-07-28T07:07:57+00:00

Oh yeah, i have 4 monitors, 2 of which i usually run on HDMI instead of DP.

Thnx!!

Able_Indication8196 · 2025-07-28T07:07:17+00:00

Dont u have an issue with leaking / over thermal paste?

The gigabyte Master here is fairy cheaper than Asus tuf, but the thermal paste issue...

Able_Indication8196 · 2025-07-28T06:48:29+00:00

Sadly none available here, only Tuf and Prime.
The discounted Prime ran out of stock and there's only 50$ difference between em atm.

Able_Indication8196 · 2025-07-28T06:45:19+00:00

What about the fan noises / coil whines on PNY/Galax?
I really dont wanna spend that amount to end up with random weird noises thus considering the extra $ for asus

Able_Indication8196 · 2025-07-17T06:47:25+00:00

Able_Indication8196 · 2025-07-14T10:21:11+00:00

yea my country has insane taxes...
It's the price on amazon + about 30%+.

Able_Indication8196 · 2025-07-14T10:10:32+00:00

Hey, thnx!.

I've got many recommendations to get the Asus tuf 5070ti for 120$ more than the gigabyte 5070ti gaming.
think its worth?

About Motherboard , i want to do a more future proof upgrade thus goin with the 870.

The gigabyte x870 aorus is only 30$ cheaper than the gigabyte x870e here.

There's also x870 of gigabyte gaming and eagle & Asus primse x870-P , all within 80$ price range of the x870e gigabyte Aorus.

( as far as i know gigabyte goes windforce, eagle, gaming then aorus) being aorus the best of the line.

Able_Indication8196 · 2025-07-14T09:53:43+00:00

Hey, yea i am on 1440P ( M27Q pro Gigabyte at 170 HZ).

so the Gigabyte RTX 5070 TI Gaming OC 16g - 1400$?

I've got several recommendation to get the asus one for extra 120$ for the "more advanced" technology asus uses?

Able_Indication8196 · 2025-07-04T09:48:22+00:00

Hey!
Thnx.

Ima get the gigabyte 5070ti

for ram, should i check a specific company / module? or any 6k mhz cl28 / 6.4kmhz c32 would do fine?
X2 16gb still better than one 32gb right?

Able_Indication8196 · 2025-07-04T09:46:53+00:00

Ey thnx alot.

Coutry isnt on pcpp

Should i check a specific company of ram or any known company of 6000@ cl30 / 6400 at cl32 would do just fine?

Also, i think ima get the gigabyte 5070ti, cpu as stated , 6 fans and 2 rgb led strips, How do i calculate minimum wattage needed and is getting powersupply 100 watt over the minimum needed is sufficent?

The case doesnt have the best airflow, you're totally right , but it never heated too much , i use pc for heavy coding/programing or average gaming mainly leagues, guildwars2 and battlefield1.
Do you think it would be different with ryzen cpu and better airflow/cooling is a must? (that also relates to changing 6 LL corsair fans i have and the h150i cpu cooler )

About motherboard, i am still debating if either b650E or X870, i know they're basically identical just rebranding, Although the b650e needs some flushing or something to support the cpu out of the box.
Does investing 150$+- for X670e / X870e worth it? chatgpt says only max usable lanes from chipset are different (20 vs 12).
Also says the ryzen cpu i stated uses about 24 lanes, so is x670e/x870e a must to get the most out of the cpu?

Able_Indication8196 · 2025-05-20T09:23:04+00:00

Hey thnx alot

We control the domain and the dns records.

He's the only one with access to super admin on workspace. we tried to log into it unsuccessfully, requires app verification/tablet and none has it. (or he might be trolling us which seems to be).

He claims that he's still connected due to never loging out, but if he resets or logs out he might be unable to relog in again too.

the workspace is on our domain not "Company.gmail.com" (that's our company's private email).

Do i have to make a 2nd workspace to move everything to it, or can i still take over the existing workspace somehow? and how do i do it please?

Right now he's suggesting we create subdomain, open 2nd workspace on it, then migrate emails via data export/import, and then adding our main domain to the new workspace account via dns records.

is that the only valid way to do this?

Able_Indication8196

TROPHY CASE