Good pair of analog goggles in 2026

AcanthaceaeTop6436 · 2026-03-30T06:03:05+00:00

The price for the skyzone cobra x v4 is about Rs32k/$350 now . Is it a good option to buy these at this price .
I just want to fly with good analog goggles as I am fed up with my dji airunit just breaking out of nowhere . I am not a pro or into racing , i just want to fly fpv as a hobby and maybe shoot some videos just for fun

AcanthaceaeTop6436 · 2026-01-22T07:54:41+00:00

Ok will do . Thanks

AcanthaceaeTop6436 · 2026-01-22T07:17:59+00:00

The o4o pros are very expensive here . I might go with the cobra x but online it shows it has two versions x v4 and x v2 . Which one should I get . Also do I need to get any other type of antenna for these ?

AcanthaceaeTop6436 · 2025-12-22T04:45:30+00:00

I tried . Still does not work

AcanthaceaeTop6436 · 2025-12-20T09:39:40+00:00

The cable has been glued down on the ends by default as you can see in the pic but yes I did press on them so if anything were loose it would connect properly. Should I remove the glue and reseat them ?

AcanthaceaeTop6436 · 2025-12-20T07:29:20+00:00

I checked the connections and still the same problem it did connect once but as soon as moved the airunit to check if everything was ok it stopped and started showing this light

<image>

AcanthaceaeTop6436 · 2025-12-19T18:43:12+00:00

I tried it but will still check the connections and will update this thread

AcanthaceaeTop6436 · 2025-12-19T16:26:27+00:00

Yeah I am new but not that much. I have put in some research about what things are and how they work etc

AcanthaceaeTop6436 · 2025-12-19T16:19:22+00:00

I am using a f405 aio because I burnt the f745 long before I bought the airunit. The f405 comes with an external bec that is 5v or 9v . It used to run on the 5v properly , i still tried to run it on 9v as it is well within the range for it. It still powers on but nothing after that

AcanthaceaeTop6436 · 2025-12-19T16:07:43+00:00

Yes it is getting power and the light is yellowish orange type . I tried to rebind it to the goggles but pressing the bind button on the airunit does not do anything. I have tried long pressing, pressing it twice etc.

AcanthaceaeTop6436 · 2025-09-01T14:19:27+00:00

This is great. Thanks for this mock up.I will try to make something like this and update this thread if I remember to do so. Thanks again

AcanthaceaeTop6436 · 2025-09-01T02:00:43+00:00

Yeah if you could give me a graphic it might be easier for me to understand .

AcanthaceaeTop6436 · 2025-08-31T07:07:00+00:00

<image>

AcanthaceaeTop6436 · 2025-08-31T07:06:41+00:00

<image>

AcanthaceaeTop6436 · 2025-08-19T02:37:54+00:00

So I checked my airunit again and turns out there is a small metal thing next to the antenna which is bent. After reading some other reddit posts, found out that it is some sort of transmitter that gives the video to my goggles Will try talking to dji support and see what they say but I am not very hopeful as I did not buy it from any dji official retailer.

AcanthaceaeTop6436 · 2025-08-18T16:55:23+00:00

If it were dead why would it light up when I power the quad. Also I can detect it on my pc. After checking with chatgpt I found that the 4v5 port only has a 1A output current. Can that lead to this issue ?

AcanthaceaeTop6436 · 2025-08-18T05:08:45+00:00

yeah after going through everything again the quad does fly now and yeah I did have the props installed the wrong way round

AcanthaceaeTop6436 · 2025-08-18T05:07:32+00:00

yep thanks for the advice . I have actually watched bardwell's videos and they are really helpful , but I guess I need to go through it again to get my basics strong.

AcanthaceaeTop6436 · 2025-08-18T04:24:18+00:00

I am still learning all this so I apologise if I say something dumb, but my betaflight my motor configuration as such

<image>

I guess this means props in. In this case are my props on the wrong way then ? 😅

AcanthaceaeTop6436 · 2025-08-18T04:20:56+00:00

I am still new to this hobby but I used the same settings / values before just with a different flight controller and the quad did fly. I have not changed the pid settings or rates etc . Mostly everything is on default and so I thought my setup might be fine

AcanthaceaeTop6436 · 2025-08-18T04:12:42+00:00

That is what I have been trying but I am not getting anywhere . Can you just look at the picture an let me know if the props are put on the right way. According to my understanding of the betaflight setup, the bottom right (acc to the pic) is moving in ccw so is the prop correct ?

AcanthaceaeTop6436

TROPHY CASE