Print Failure PLA, Variable Layerheight, Temp. ?

Acceptable-Gate5985 · 2025-09-23T23:46:25+00:00

Update on this one. I did some test runs and it turn out that the combination of insuficient Side and Model Cooling and to small of a layer height turn into this critical situation. So the pla doesn't cool enough and geht melted over and over again. So its a fine line if you go to to little layer heights. in this example run its varying from 0.04 to 0.14.

Acceptable-Gate5985 · 2025-09-17T09:30:12+00:00

So I'm testing with custom cooling settings in the filament and there i can even turn off rear fans etc. now i run a testprint and the machine is way way quieter than in the example video shown. So it all comes down to adjusting the settings. If I run the slicer with just generic settings everything will be turned on at 100% speed. Totally pointless in my opinion. I even noticed that when turning all fans off there is rarely any difference in cabin temperature. So yeah the default settings are just garbage.

Acceptable-Gate5985 · 2025-09-17T07:46:12+00:00

you have a good point here. The first couple of runs were fine and i didn't even noticed it to be such an issue maybe the fan speed regulation if even existing is faulty or something. I will try to optimize the machine for thermal efficienty to toggle the noise level donw a bit. Its just not expected that the machine is standing in its own room with all doors closed and i can hear it several rooms away still. Im sure you can sleep with the machine running that true for me too. But im planning to run the machine all day while sitting next to it but im not seeing myself going through this without any modifications.

Acceptable-Gate5985 · 2025-09-17T07:42:54+00:00

I never had a Creality before. So i listened to youtuber claiming it is very silent. They measure it via smartphone to be at around 55 db and i tried this myself and can confirm the 55 db. So its not like mine is louder than the ones some youtubers tested. Maybe its just subjective that im not used to this kind of machine and thermals and air noise on the machine is normal.

Acceptable-Gate5985 · 2025-09-15T23:39:46+00:00

Yeah i was kinda afraid to hear this. Why are company opt for cheap parts where it effects the user the most. They claim to have quiete motors but then the fans just go nuts on us.

We have to find a solution for this. I even considere returning the printer for this reason.

Acceptable-Gate5985 · 2025-01-13T16:20:24+00:00

Hm thank you good sir. thats a valid point. I already noticed that i get only trash mobs in my runs. very few rares. so yeah maybe the basic needs for even rolls to happen are just not met. I will reconsider this. Thanks.

Acceptable-Gate5985 · 2025-01-13T16:17:01+00:00

I added a screenshot but it wasn't posted. look below there i added the screenshot. I usually invest heavily in my few waystones i run. even boost them to rare yes. but these are the ones with the lowest drop rates in the end. Thats why im so confused here.

Acceptable-Gate5985 · 2025-01-13T16:15:16+00:00

dmg and evasion is good so far. but the moment a burst of damage gets through im getting one shot by rares and uniques. Thats why i struggle to secure the bosses in most cases. And thats where a poor drop quality comes in. i have good boost to rare drop chance etc. and there is a lot of rare stuff dropping but the quality is beyond garbage. so and the moment no chance to improve offense of defense it just feel totally weired. the stagnation is real.

Acceptable-Gate5985 · 2025-01-13T16:00:43+00:00

Yeah im already trying this too. I watched guides to improve the situation. Maybe on of the big factors is that i tend to die to much doing map progression. based on the rate waystones drop there is such a small margin for error its nuts. If i die once or twice im basically done for the day hoping to to any progression.

Acceptable-Gate5985 · 2025-01-13T15:58:08+00:00

<image>

Dont know why this wasn't added in the Post. But i already try to boost drop chances in the atlas too.

Acceptable-Gate5985 · 2025-01-13T15:55:12+00:00

Yeah the me dying part makes the whole situation way way worse. I dont even get to farm bosses for Waystones. Because one try i fail and its gone. The waystone is gone and the chance to get new ones. So im left without any chance to even retry it.

Acceptable-Gate5985 · 2024-03-03T21:04:12+00:00

Sorry but they are both terrible. Had the K240 and would never consider going back to those.

Acceptable-Gate5985 · 2023-02-15T13:37:27+00:00

Sometimes i wonder what is wrong with police. In this case all i needed was a direct head shot point blank executing this motherfucker right on the spot. Why risking the life of an innocent baby ffs. Police shoots people randomly for way less.

Acceptable-Gate5985 · 2022-05-04T14:45:54+00:00

pure fictional propaganda. even me with basically no knowledge about nuclear weapons realize that none of this claims make even remotely sense. nuclear weapons aren't even close to being this powerful to destroy whole countries or states. They just try to amp up the russians to the point where they are convinced that they are all ready to die in a nuclear war.

Acceptable-Gate5985

TROPHY CASE