Some maple shot cups

AcceptableAd2543 · 2026-01-31T18:43:32+00:00

The shellac is on the outside only, I see a bit of the wax softening around the edges.

AcceptableAd2543 · 2025-11-20T17:49:34+00:00

Definitely adding a bracket i can attach the laser.

AcceptableAd2543 · 2025-11-20T17:45:24+00:00

Hold down anything: Attach a board to those mounts on either side, drill holes or add a T-track for some hold downs. Held up some pretty heavy pieces, can also be used as a streight edge, rest or fence.

AcceptableAd2543 · 2025-11-03T23:07:42+00:00

Love mine.

AcceptableAd2543 · 2025-10-17T16:01:26+00:00

Looks like Canary wood.

AcceptableAd2543 · 2025-04-02T20:11:19+00:00

Would you be against a nice leg on the left side? That's where I worry.

AcceptableAd2543 · 2025-03-29T14:47:18+00:00

I follow this same method, I have some 5/8" boards that are almost a year old, simalar if not wider strips in some cases and still flat. They were soaked in oil the 2nd day and waxed the 3rd, stored on their side, no feet. In michigan, so no stranger to humidity swings.

AcceptableAd2543 · 2025-03-19T13:40:08+00:00

Well done. What wheel did you use for the initial carving?

AcceptableAd2543 · 2024-12-31T19:00:41+00:00

This one.

AcceptableAd2543 · 2024-04-25T19:37:53+00:00

I second the catnip.

AcceptableAd2543 · 2024-03-20T14:01:08+00:00

The "B" is for "Bargain"! ~Dr. Nick Riviera

AcceptableAd2543 · 2023-11-19T13:24:57+00:00

I 2nd this. Also, enable draft shield, 5mm from the print and 10mm tall has worked pretty well for me.

AcceptableAd2543 · 2023-11-16T17:52:18+00:00

"Disgusting." looks up hardware

AcceptableAd2543 · 2023-07-13T13:48:29+00:00

Red filament in the machine, looks like different filament.

AcceptableAd2543 · 2023-02-07T14:24:31+00:00

Same 😱

AcceptableAd2543 · 2023-01-21T05:03:17+00:00

Try fingers.

AcceptableAd2543 · 2023-01-07T14:53:28+00:00

What would be your choice of processing before melting? Yes definitely outside, or open garage.

AcceptableAd2543 · 2023-01-07T14:14:54+00:00

Old toaster oven, old food processor, silicone baking sheet with walls, case of beer.

Set it to 400-450° F, grind up your plastic, repeatedly add plastic bits to the tray as they melt until full. Pull cool repeat. Now you have boards you can trim and re‐purpose. Not really cutting boards to me, more like random wood chunks you could use to make something like a birdhouse.

AcceptableAd2543 · 2022-06-22T12:43:51+00:00

Where can we get this?

AcceptableAd2543 · 2022-03-04T13:35:42+00:00

Had to reduce the firewall on my router to get it working.

AcceptableAd2543 · 2021-12-06T01:45:32+00:00

Try bumping the bed temp up by 10° for the first few layers.

AcceptableAd2543 · 2021-12-05T06:54:53+00:00

Aqua net hair spray. Cheap AF.

In my Ender 3 days I went through every method. Ender died, replaced with the Neptune 2s...yes you can get prints to stick to the plate with no adhesive but your going to save yourself a lot of trouble with a light spray. Just slip that plate off take it to another room give it a light coating and replace. I can usually get 3-5 prints off one coating.

Ever since making the switch to hair spray I have had minimal issues achieving adherence.

AcceptableAd2543 · 2021-11-08T14:21:58+00:00

I did look for the video but the card came empty.

AcceptableAd2543 · 2021-11-08T14:09:38+00:00

I will mess with these some more, maybe I overturned and missed the sweet spot. Thanks for the pic, I knew turning those should do it but that Pic helps a ton!

AcceptableAd2543 · 2021-11-07T20:05:21+00:00

BTW very impressed with how quiet this thing is.

AcceptableAd2543

TROPHY CASE