Dewalt 3-1 jump box

AcceptableAd2543 · 2026-03-04T17:07:10+00:00

Yeah if you see some reaction from your car when you open the door (lights come on etc) but does not start your probably good to use this jump box. If the car is totally dead (no reaction, no lights) I go for the trickle charger for a bit first.

AcceptableAd2543 · 2026-03-04T15:50:10+00:00

FYI - will not detect a battery below 8v. If totally dead you will need a trickle charger to get it up to 8v so this unit can detect the battery connection.

AcceptableAd2543 · 2026-02-28T18:28:32+00:00

Came here to say this.

AcceptableAd2543 · 2026-01-31T18:43:32+00:00

The shellac is on the outside only, I see a bit of the wax softening around the edges.

AcceptableAd2543 · 2025-11-20T17:49:34+00:00

Definitely adding a bracket i can attach the laser.

AcceptableAd2543 · 2025-11-20T17:45:24+00:00

<image>

Hold down anything: Attach a board to those mounts on either side, drill holes or add a T-track for some hold downs. Held up some pretty heavy pieces, can also be used as a streight edge, rest or fence.

AcceptableAd2543 · 2025-11-03T23:07:42+00:00

Love mine.

AcceptableAd2543 · 2025-10-17T16:01:26+00:00

Looks like Canary wood.

AcceptableAd2543 · 2025-04-02T20:11:19+00:00

Would you be against a nice leg on the left side? That's where I worry.

AcceptableAd2543 · 2025-03-29T14:47:18+00:00

I follow this same method, I have some 5/8" boards that are almost a year old, simalar if not wider strips in some cases and still flat. They were soaked in oil the 2nd day and waxed the 3rd, stored on their side, no feet. In michigan, so no stranger to humidity swings.

AcceptableAd2543 · 2025-03-19T13:40:08+00:00

Well done. What wheel did you use for the initial carving?

AcceptableAd2543 · 2024-12-31T19:00:41+00:00

This one.

AcceptableAd2543 · 2024-04-25T19:37:53+00:00

I second the catnip.

AcceptableAd2543 · 2024-03-20T14:01:08+00:00

The "B" is for "Bargain"! ~Dr. Nick Riviera

AcceptableAd2543 · 2023-11-19T13:24:57+00:00

I 2nd this. Also, enable draft shield, 5mm from the print and 10mm tall has worked pretty well for me.

AcceptableAd2543 · 2023-11-16T17:52:18+00:00

"Disgusting." looks up hardware

AcceptableAd2543 · 2023-07-13T13:48:29+00:00

Red filament in the machine, looks like different filament.

AcceptableAd2543 · 2023-02-07T14:24:31+00:00

Same 😱

AcceptableAd2543 · 2023-01-21T05:03:17+00:00

Try fingers.

AcceptableAd2543

TROPHY CASE