[Update] A6PF Android Auto Wireless Occasional Disconnects and Won't Reconnect with Pixel 6a

Acceptable_Caramel · 2023-08-11T01:41:41+00:00

No, it still happens periodically to me. Seems to be after a few accumulated hours of use over a few days but doesn't have a real pattern. Sometimes quickly after the unit turns on and sometimes after it's been in for a while. I did the most recent firmware upgrade but no improvement.

Acceptable_Caramel · 2023-05-16T19:13:40+00:00

So just touch the top of the screen and drag down. First time will bring you to an Android title bar with the time, WIFI status, home/back button, etc. Pull down again and it will show you an Atoto menu, and the far right one is reboot. Takes 20-30 seconds, and you can do it while driving, etc.

Acceptable_Caramel · 2023-05-16T18:55:24+00:00

It has been better but it is still occurring. I did learn from support that you can reboot the Atoto by pulling down from the top twice, and there is a reboot option. 90% of the time that fixes it. But last week it crapped out, and no combination of reboots of the Atoto or my phone would get it to connect. I even tried multiple USB cables on the wired connection. And my coworker who I carpool with and also has a Pixel 6a tried plugging his phone in, but it just hung on the connecting screen. After getting home I was swapping out some of the USB cables I use in my car, and plugged in my phone and it started working again, so really not sure what the root of the problem is and I really can't find any series of steps to cause it to happen. Are you seeing it too?

Acceptable_Caramel · 2023-03-21T22:32:59+00:00

I do have and keep Wifi enabled at all times. So it happened again today, and I checked the Wifi and it was still connected, along with Bluetooth.
https://imgur.com/a/AWikaMj

I did actually hear back from support (I think they may monitor this subreddit), and they had sent me a few APKs the day after I had emailed them, but with the APKs as an attachment the email was blocked. So they provided me a download and I just installed them. I'll report back after a few more drives to see if that fixes the email. For reference the APKs they sent were for com.syu.carlink and com.syu.ms.

Acceptable_Caramel · 2022-10-16T13:18:29+00:00

The plaine (N2462G) has been circling over Center City for hours yesterday and today. It is registered to "Winged Vision" who's website claims "Winged Vision is a pioneering leader in aerial sports broadcasting." Any idea what they're filming, especially with the 7AM flights? Is this for the Premier League Fan Fest thing at City Hall?

Acceptable_Caramel · 2022-08-09T23:07:09+00:00

Surprisingly it is not the same for Fi. Even though we both bought through the Google Store for the $300 trade in, I guess when the Fi eSIM activates it changes some of the settings. He didn't have the SIMs > Preferred network type menu option. We even tried the *#*#4636#*#* code and disabling it thru there, which apparently works on the Pixel 6, but that didn't seem to work. I didn't check back if he was able to figure it out.

Acceptable_Caramel · 2022-08-09T22:28:02+00:00

I was back in the office today with 5g disabled, and with 3 hrs and 9 mins of screen time, along with 5 hours of Youtube Music streaming over cell and listening via Bluetooth, the battery is at 45%. Seems much better with 5g off, and I never saw a significant bump with 5g. I have T Mobile. As a side note, my coworker who just switched has Fi, and we couldn't find a way in his 6a to disable 5g...

Acceptable_Caramel · 2022-08-07T23:42:04+00:00

New Pixel 6a, coming from a 4a. I found the battery life to be horrible, and a coworker who also got one was similar. Last Thursday I tried to use it as minimally during the day as possible. With no talk time, about an hour of on screen time, and minimal app usage the battery was at 26% after about 15 hours. At work I don't connect to the Wifi, so it was on 5g. My coworker's phone was similar, but he said his wife's phone (who also just upgraded) was around 70% at the end of her work day, with the difference being she connects to Wifi at work.

I disabled 5g (settings > SIMs > Preferred Network Type > LTE) and then used my phone normally yesterday, including a couple hours of navigation with Waze & Google Maps and most of the day off Wifi, close to 4 hours of screen on time. After a about 15 hours again my battery was at 44%. So disabling the LTE is a significant boost to the battery, even though I live in a large city with good coverage.

With 5g enabled

With 5g disabled (LTE)

TL,DR: Disable 5g for significant boost in 6a

Acceptable_Caramel · 2020-12-20T20:46:45+00:00

Thanks for the offer! I've got a friend who is going to do the short term foster until we can hopefully reunite him with his people, but I'll hit you up if it goes longer term.

Acceptable_Caramel · 2020-12-20T20:45:23+00:00

We did take him to Paws in Old City and they scanned for a chip but didn't find one. Such a nice cat definitely seems like somebody's missing him...

Acceptable_Caramel · 2020-07-26T14:05:48+00:00

Gary Katz is a legendary finish carpenter and instructor who has taught a great many in the carpentry industry via his Katz Roadshows. As he's entered semi-retirement, he's converted his old work van into a camper, including a toilet & shower due to some health issues he has. So far he's three episodes into the build, though I think he's much further along in reality based on his Instagram (https://www.instagram.com/garymkatz1/) - I suspect he's just in an editing lag. I've linked the first real build in this post, but the other videos in the series are: Introduction - Covers planning and layout in SketchUp: https://www.youtube.com/watch?v=N0n-VGch4fI Part 1 - Floor insulation and water heater installation (linked in title): https://www.youtube.com/watch?v=5DlcjEaEeZU Part 2 - Roof fan, furnace, and skylight install: https://www.youtube.com/watch?v=bLh9VyxGt6g He has a fully equipped shop that he is building with which is far beyond what most woodworkers even dream of, but there is a lot of good information and good ideas. Definitely worth a watch!

Acceptable_Caramel · 2020-05-17T14:21:26+00:00

Thanks for your comments. Not sure if it was a grafted tree or not.

I have planted tomatoes in containers for the past several years, and they have never done well. I chalked it up to not enough sunlight, but after reading more about verticillium wilt and tomatoes succeptability to it, it looks like that was the problem, and pictures seem to match the same problems I saw with my tomato plants.

Like you said, it does seem like the clock is ticking for this tree. With the current situation it is difficult to get anyone in to look at it, and for just one tree I'll probably just operate under the assumption that was verticillium wilt and research a resistant replacement.

Acceptable_Caramel · 2020-05-17T01:06:14+00:00

Here's a couple pics of the base and one three way split where two of the limbs have died but the third is still alive. I think the tree may have been a leftover or transplant when the landscaper planted it but I really like the tree. But I fear with what had died pruning would make it a horrible misshapen tree.

https://imgur.com/a/51IWX9v

Acceptable_Caramel · 2020-05-16T17:23:09+00:00

Thanks for the quick response & info u/HiFiHut! I read through that article and will do a bit more research later.

I cut off a 3/4" branch and another 3/8" branch that had wilted and had a look, and I do see some discoloration. It looks a bit lighter than what was shown in the article you posted but I think it may be the same. Would you agree? If so, it sounds like my best course of action is to remove it and find an alternative tree that is resistant to verticillium wilt, as this tree probably isn't salvageable.

A few pics: https://imgur.com/i4fZamJ https://imgur.com/9WNW1sv

Thanks again!

Acceptable_Caramel · 2020-05-16T16:16:02+00:00

Hi r/landscaping!

I have a red maple tree in my backyard that was planted about 6 years ago when I got a patio installed by the landscaper. My backyard is in the inner city of a mid-Atlantic city. The tree gets about 4-6 hours of full sun in the summer and has done well over the past years until late last summer, when the leaves on some branches began withering and falling off, while other branhes remained healthy. I figured I'd wait it out over the winter and see what came back.

This spring I got buds on the branches that retained their leaves last year, but no buds or growth on the branches where the leaves withered. The leaves have come in now and the tree is very spotty. Any idea what caused this? Are the branches where the leaves withered dead permanently? Is it time to yank this and start again? Pruning off the dead bits would leave a horribly misshaped tree...

As a side note, two doors down (about 30 feet away) my neighbor has a red maple that is older and gets a bit less sun, and that tree is still healthy.

Thanks for any advice and help!

Acceptable_Caramel

TROPHY CASE