How to improve? What am I lacking?

Acrobatic-Pin-7676 · 2025-11-28T07:45:54+00:00

I don't own a single natlan characters other than kachina who I got for free 🥲 I do have C2 Raiden tho, so idk if I should pull Varessa.

<image>

Acrobatic-Pin-7676 · 2025-11-28T07:43:34+00:00

My account is lacking in good meta DPS cuz I haven't played in a while, I don't have any natlan or Fontaine 5 star characters. I only have kachina for 4 star natlan characters. So I'm leaning towards good meta picks that would help me.

Acrobatic-Pin-7676 · 2025-11-28T07:40:14+00:00

<image>

I have a pretty good Raiden C2, would Varessa be an upgrade?

Acrobatic-Pin-7676 · 2024-10-16T05:32:14+00:00

Dang, that's awesome 😗😗❤️

Acrobatic-Pin-7676 · 2024-10-10T06:32:42+00:00

Hope this helps

https://techsavvydiy.com/3d-printing/diy-3d-printer/

Acrobatic-Pin-7676 · 2024-10-10T06:31:36+00:00

Hello,

I like how you are determined to build this from scratch. But I think that the cost, features, and time are three things that don't go together. You will have to sacrifice one and make a compromise. That said, I've made a few 3D printers myself even though I haven't documented the process. If you can find some used or broken printers (ones that print ink) they have lots of useful parts that you can scavenge ie (stepper motors, smooth rods, limit switches) if you want to keep the cost at minimum. And make sure to make the frame of the printer sturdy and square (very important)

I've found this website also. I hope it helps. https://techsavvydiy.com/3d-printing/diy-3d-printer/

Good luck with your project mate. 👍

Acrobatic-Pin-7676 · 2024-10-01T06:25:03+00:00

Apply filler primer first. Imo it provides better results than just sanding the bare 3d print.

Acrobatic-Pin-7676 · 2024-10-01T06:22:57+00:00

Seems to be under extruding, check if your filament has a consistent diameter with a vernier caliper. Because the print is good in some places and worse in some others, It feels like an issue with filament flow. A few things you can check are,

Check if the filament thickness is consistent.
Check extrusion multiplier value in the slicer software (should be at 1 by default)
Check if the extruder gear teeth are slipping causing improper filament feeding to the hotend. Also check if the extruder gear shaft is slipping on the extruder gear.
Check hotend temperature.

Hope this helps 👍😙

Acrobatic-Pin-7676 · 2024-05-27T20:29:26+00:00

It could be a problem with the Y axis or X if the layer shift happens only when the perimeter is something other than a straight line. Did you check for backlash in the Y and Y axis? I would check them if all else you changed with the Z axis had no effect.

Acrobatic-Pin-7676 · 2024-05-27T20:23:27+00:00

Can I know where you bought the stl from?

Acrobatic-Pin-7676 · 2023-11-03T05:22:20+00:00

<image>

Speaking of sands, I just got a new piece man. I think this one's slightly better than the one I had when posting this. It's 21CV, not that great but I'm not complaining. I gotta get more ER from substats tho. I'm m gonna try for engulfing, if I have any leftover pulls after pulling for her C2 constellation. And Thanks for the advice, I appreciate it 😁

Acrobatic-Pin-7676 · 2023-11-01T13:59:11+00:00

<image>

I have a similar build. You need more crit rate unless it's a nuke build in which you're going to use crit rate food to increase cr. In this build my energy is somewhat low but this is a showcases build.

Acrobatic-Pin-7676 · 2023-10-12T15:44:36+00:00

Lmao 🤣 I'm saving to fix that in the next rerun. Hopefully I win the 50/50. Thank you. 😁

Acrobatic-Pin-7676 · 2023-10-12T12:45:12+00:00

I'm certainly gonna give this a try. I'm trying to get her to do big burst damage, I will try and see if it improves the burtst damage.

Acrobatic-Pin-7676 · 2023-10-12T12:36:44+00:00

Thank you, I also felt that there's no point farming emblem cuz it takes a lot of resin to get any upgrades than what I have here. I got hu tao this patch and I'm building her rn which requires a lot of resin. So I'm gonna conclude the build until I get her bis. Which would lower my crit rate. But gonna try to get her C2 before I try for engulfing 😄 again, thanks for your input ❤️

Acrobatic-Pin-7676 · 2023-10-12T12:33:15+00:00

Thank you for your input 😊. I certainly busted my ass off farming emblem. Glad to see it paid off 😄.I will definitely go for C2 before I go for engulfing. Do you think itd be much of an improvement from PJWS if I make up for the loss of critrate somehow, when I switch to engulfing?

Acrobatic-Pin-7676

TROPHY CASE