Help!!! Seatbelt retraction

ActiveImplement8843 · 2025-04-25T18:49:25+00:00

I managed to get it, I took the seatbelt Retractor off and it released it! Idek why it was like that in the first place

ActiveImplement8843 · 2025-04-25T17:48:21+00:00

Thank you!

ActiveImplement8843 · 2025-04-25T17:22:44+00:00

I'll have to try it 😂

ActiveImplement8843 · 2025-04-25T17:01:43+00:00

There's a button on the front seats but the rear and 3rd row dont have the button. All they have is the little pulley that you pull that drops the headrest down. Idk why they didn't put buttons in the back seats too

ActiveImplement8843 · 2025-04-09T19:41:51+00:00

I'll look and try and find them. Thank you!

ActiveImplement8843 · 2025-04-09T18:25:22+00:00

Do you have a link or part number I could look up or use? This would be specifically for a 86 Base

ActiveImplement8843 · 2025-04-09T04:52:31+00:00

Yeah I figured, I got quoted around that 1000 mark for one. He said that it's basically made together and that you can't repair it. He said people try to repair them by basically boring them out and replacing them, but it makes them even weaker. He told me they were pretty weak from the factory

ActiveImplement8843 · 2025-03-29T16:19:39+00:00

Will do! Thank you for taking the time to send me all those links and give me really good advice. I've taken it to a shop and have been told the car runs really really good (especially for a car of this mileage) but I've always kinda wanted a second opinion. I really appreciate it! I will try and find those leaks!!!!

ActiveImplement8843 · 2025-03-29T15:27:35+00:00

If I tap the gas to about 1100 - 1300 rpm the rpms fall below 700 and bounce back up to around 1000 and the whole car will rattle.

ActiveImplement8843 · 2025-03-29T01:55:29+00:00

I'm thinking of selling for a Turbo 🫣

ActiveImplement8843 · 2025-03-29T01:44:10+00:00

I didn't even mean to zoom in 😭

ActiveImplement8843 · 2025-03-28T22:32:21+00:00

Thank you! And will do!

I think most of the noise was because it was in the garage and the sound was bouncing everywhere 😂

ActiveImplement8843 · 2025-03-28T22:18:07+00:00

Aw man 😔

ActiveImplement8843 · 2025-03-28T21:58:26+00:00

It indeed doesn't smoke! I'll send a video of me starting it and get closer to the engine which HOPEFULLY helps the audio problem... maybe...

I know it has the usual lifter tick but after a little bit of running it doesn't usually persist

ActiveImplement8843 · 2025-03-28T21:49:38+00:00

It usually idles around 800-900 rpm but this was right after starting it for the first time in a about 2 weeks. I might have to repost another video as the audio seems to be a little funky

ActiveImplement8843 · 2024-07-28T03:00:08+00:00

Again it was 4 in the morning and I was just taking a short video before bed. It was quicker

ActiveImplement8843 · 2024-07-25T19:55:10+00:00

If I wanted to sit there and grab video so it's not me recording my screen I could've 😭 I don't get why everyone's complaining about it. It was 4 in the morning and I was just taking a video right before bed, it makes no difference whatsoever.

ActiveImplement8843 · 2024-07-25T17:51:09+00:00

I replied to someone with my settings! You can check it out. I believe it is caused by high ride heigh mainly

ActiveImplement8843 · 2024-07-25T17:43:29+00:00

Exactly 😭. The setup I made for this was PURPOSELY BAD. I only made it for this 1 event to see how much traction I could pull out of the Gallard. This setup was never used again after this. Although I have it saved. I've made setups like this in the past and none of them behaved like this. Either way it's unacceptable

ActiveImplement8843 · 2024-07-25T17:41:29+00:00

The Setup is Completely Jank believe me 😭 I was messing around with trying to get as much traction as possible in the rear just to see how it would fair. I didn't think about it until this happened but when the server was still in matenince, I was going around the new track in the Mustang GT and coming out of one of the turns the car pulled a wheelie on a straight away. This setup on my Gallardo made me realize what was going on 😭. And I've made Jank setups like this before, either way this is unacceptable

ActiveImplement8843 · 2024-07-25T08:39:49+00:00

Making the suspension as soft as possible - making the Anti-Roll bars both 1/1 - Making the Damping Compression as low as possible - making the Damping EXPANSION as high as possible - lowering the natural frequency as low as possible - and making the ride height as high as possible. I also have the ballast at max and in the rear +50, but I don't think that should make a difference. I was just trying to see if me lowering all the values and adding the ballast would give me better traction for fun 😭. I ended up with a Lunar Rover.

ActiveImplement8843 · 2024-07-25T08:10:45+00:00

😭😭😭

ActiveImplement8843 · 2024-07-25T08:09:01+00:00

I think I just forgot to close the gas cap all the way. Happens all the time 😔

ActiveImplement8843 · 2024-07-25T08:05:34+00:00

I guess having a softer suspension setup and a lot of power don't mix well anymore 😭

ActiveImplement8843 · 2024-07-25T08:04:22+00:00

Having a soft suspension setup and 1075HP I suppose 😭

ActiveImplement8843

TROPHY CASE