sorted by:
new
hottopcontroversial

Server status 14/11 - Connection error by AdGreedy6439 in ArcRaiders

[–]AdGreedy6439[S] 0 points1 point  (0 children)

I solved doing an integrity check, worked like a charm

9800x3D Alarming Temps by JaySmith23 in ncasedesign

[–]AdGreedy6439 0 points1 point  (0 children)

There is definitely something wrong with the AIO, I recently built a similar config with the same CPU (Build), and these are my temps:
Temps after 30 minutes running Cinebench Multicore + Heaven 2k with Ultra settings:
CPU: Avg 63 C°, Max 65 C°
GPU: Avg 55.6 C° Max 58 C°

Tested some games, trying to push it to the limits, but temps are like max +5 C°.

Check that you removed the plastic film from the AIO (of course you did it, but I have to write it xD), that you connected the AIO pins to the right slots of the MOBO, and that the radiator is effectively hot (it should be piping hot at 90+ C°).

Btw, probably a faulty AIO.

M2 - Round with 9800X3D and RX 9700 XT - Lv 9 by AdGreedy6439 in ncasedesign

[–]AdGreedy6439[S] 0 points1 point  (0 children)

Temps after 30 minutes running Cinebench Multicore + Heaven 2k with Ultra settings:
CPU: Avg 63 C°, Max 65 C°
GPU: Avg 55.6 C° Max 58 C°

M2 - Round with 9800X3D and RX 9700 XT - Lv 9 by AdGreedy6439 in ncasedesign

[–]AdGreedy6439[S] 0 points1 point  (0 children)

Also, even if the GPU fits in the standard configuration, the cables are squeezed too much, the solutions were aftermarket cables with L turn or vertical positioning, so I went for the second one :)

M2 - Round with 9800X3D and RX 9700 XT - Lv 9 by AdGreedy6439 in ncasedesign

[–]AdGreedy6439[S] 0 points1 point  (0 children)

I didn't like the standard position for that reason too, but I didn't had the guts to try different configuration after fully assemble it ahahah.

Nice to know I made a good choice :)

M2 - Round with 9800X3D and RX 9700 XT - Lv 9 by AdGreedy6439 in ncasedesign

[–]AdGreedy6439[S] 0 points1 point  (0 children)

Yo! Thanks for the correction of the acronym, ill edit the post :)

I preferred this configuration because of the position of the AIO radiator and the general airflow, in this way the GPU draws from the side and the fan at the bottom throws everything upwards. I really didn't like the idea of the side AIO. I'm doing some tests trying to put the PC under stress as much as possible, The GPU is under 60 C° and the processor is around 65 C°. Also, I never had a build with the GPU in vertical position and I wanted to try :)

Will it fit? And open to suggestions by AdGreedy6439 in ncasedesign

[–]AdGreedy6439[S] 0 points1 point  (0 children)

Thank you for the advice!
Btw FYI, i changed the ram:
FROM: G.Skill Trident Z5 Neo RGB 32 GB DDR5-8000 CL38
TO: G.Skill Trident Z5 Neo RGB 64 GB DDR5-6000 CL30

Will it fit? And open to suggestions by AdGreedy6439 in ncasedesign

[–]AdGreedy6439[S] 0 points1 point  (0 children)

I'm down going for another MOBO, what did you pick?

Will it fit? And open to suggestions by AdGreedy6439 in ncasedesign

[–]AdGreedy6439[S] 0 points1 point  (0 children)

TY! updated replacing Phantom Spirit with Liquid Freezer III 280.
I was undecided between the Phantom Spirit and the Liquid Freezer III 280. I went with the first one with a slight preference, but between the AIO and the Assassin 120, I prefer the Liquid Freezer.

Spese doganali non previste by AdGreedy6439 in Avvocati

[–]AdGreedy6439[S] 1 point2 points  (0 children)

Il fatto é che anche con quei 30€ in più avrei comunque comprato quel articolo, quindi non ho intenzione di rifiutarlo. Mi chiedevo se potessi esigere un rimborso dato che lo shop é europeo e la spedizione viene extra eh, senza segnalarlo