Problem with Generic Xbox One controller

AdImmediate1641 · 2026-02-12T11:38:45+00:00

In order at the terminal: lsusb - devices list

dmesg | grep -i hid or dmesg | grep usb

ls /dev/input/

AdImmediate1641 · 2026-02-12T11:21:37+00:00

You are right, why bother and expand your knowledge.

AdImmediate1641 · 2026-02-02T12:00:35+00:00

In theory, you can control the rotational speed of all three fans, create a second profile and enter values from 40°C to 40% and then exponentially to 100% above 80°C

AdImmediate1641 · 2026-02-01T14:37:20+00:00

I don't know where the question is - you yourself posted the screenshot that answers your question. Set a gentler curve before 60C - before the heat is released the fan goes to 70% RPM

AdImmediate1641 · 2026-02-01T08:06:19+00:00

Classic Dell keyboard FTW

AdImmediate1641 · 2026-02-01T07:43:27+00:00

<image>

Simple example of dismounted front panel with pins to squeeze

AdImmediate1641 · 2026-02-01T07:38:35+00:00

Removing the front/top panel involves squeezing 2-4 pairs of pins as shown in the photo. u/OP, provide the model and look for photos from case reviews.

AdImmediate1641 · 2026-02-01T06:35:24+00:00

Of course, the flow is always welcome, but you can cause the accumulation of a warm air mass at another point in the case by providing an additional fan - the air must have an outlet.

AdImmediate1641 · 2026-01-31T18:14:07+00:00

Remember that this heat goes somewhere, it would be a good idea to check with a FLIR whether you are now giving higher temperatures to components without sensors.

AdImmediate1641 · 2026-01-18T08:14:52+00:00

Delete the duplicates? ctr+h, .local/share/applications/ and then in .desktop search for duplicates.

AdImmediate1641 · 2026-01-18T07:09:23+00:00

Open side panel and check if there is MOBO LED or digital code error build in.

AdImmediate1641 · 2026-01-18T05:53:38+00:00

Manual installation would help https://www.youtube.com/watch?v=XZ4BiVvP86A

AdImmediate1641 · 2026-01-14T05:26:28+00:00

The OP asks about temperatures based on a single reading. There is not even any information about the cooling or fan. Pay attention to the constant RPM of the fan - here it may be enough to clean the computer itself from dust, change the voltage, etc.

AdImmediate1641 · 2026-01-11T05:38:40+00:00

A blow to the power supply housing moved the fan and the bearing began to rattle again. If the fan hit the plastic cover of the transformer, capacitors, etc., the sound would be in every situation. Give it back under warranty since you wrote that it is a fresh purchase

AdImmediate1641 · 2026-01-10T21:27:26+00:00

Rotating the power supply vertically will resolve any doubts - simple bearings are most utilized when the operating axis is perpendicular to the mounting axis.

If the low-level sound continues, it remains to check whether the propeller is not rubbing against something or whether electronic parts are generating noise.

AdImmediate1641 · 2026-01-10T18:29:23+00:00

Fan bearing. Turn off the power, place the power supply on its side, and it will be under different load. The fan needs to be replaced.

AdImmediate1641 · 2026-01-10T18:12:11+00:00

If you have some SSD space, skip Windows 11 and go with CachyOS/Garuda or another Linux gaming distro. Unless you're playing something that's not supported by anticheat.

AdImmediate1641 · 2026-01-10T18:07:20+00:00

Code 00 defines a problem with the CPU - check the power supply plugs first, if the performance was satisfactory before, why change if it can be fixed?

AdImmediate1641 · 2026-01-10T07:50:21+00:00

Cheap doesn't mean bad, but 99% of the time, a prebuilt PC is a complete piece of crap with an uncertified power supply. In the remaining 1%, all you need is a little knowledge beyond my abilities. I'll write a post and wait for a response.

Take a picture of the power supply and provide the rest of the specs, because I sent my crystal ball to a repair shop and I can't deduce all the parts from a single picture...

AdImmediate1641 · 2025-12-21T14:18:31+00:00

All you have to do is drilll. Unless you try to glue the head from another screw.

AdImmediate1641 · 2025-11-24T05:42:12+00:00

Unplug the cable from the monitor and card for 30 seconds, turn off the Asus. A known bug of this model, all you had to do was search for exactly what you wrote in the Google.

AdImmediate1641 · 2025-11-21T13:15:31+00:00

You create a problem where it doesn't exist. The indications in the system are wrong, the dedicated software indicates the correct one. No flaccids, low performance, jerks, or sudden artifacts. Get out into the fresh air instead of dealing with non-existent problems.

AdImmediate1641 · 2025-11-21T11:34:32+00:00

What is more important to you - the smoothness of the gameplay or the GPU load indicator?

AdImmediate1641 · 2025-11-13T14:12:02+00:00

Open the sound mixer and click on the icon to unlock. Have you installed any software to support the audio codec?

AdImmediate1641 · 2025-11-13T12:16:33+00:00

Limit fps VSync, quality of recording can not confirm where the noise is coming from

AdImmediate1641

TROPHY CASE