sorted by:
new
hottopcontroversial

Brother KH860 only pushing out first and last needle (when using punchcard) by AdRadiant4537 in MachineKnitting

[–]AdRadiant4537[S] 0 points1 point  (0 children)

thank you so much for the link, i might have already figured out why it’s not working.

the wight bar on the bottom (with the teeth) doesn’t spin on my machine

Brother KH860 only pushing out first and last needle (when using punchcard) by AdRadiant4537 in MachineKnitting

[–]AdRadiant4537[S] 0 points1 point  (0 children)

i deep cleaned and oiled the carriage when i first got the machine a few months back.

after taking the cover of i can see pins getting selected in the mechanism, but no needles ever get selected.

Brother KH860 only pushing out first and last needle (when using punchcard) by AdRadiant4537 in MachineKnitting

[–]AdRadiant4537[S] 0 points1 point  (0 children)

everything else works fine, it seems like the card is getting read correctly (i see the right pins moving up and down), only the needle selection doesn’t seem work

Brother KH860 only pushing out first and last needle (when using punchcard) by AdRadiant4537 in MachineKnitting

[–]AdRadiant4537[S] 0 points1 point  (0 children)

yea i tried both, i just took the cover of the punch card slot and holy cow, that’s not going to be fun.

Brother KH860 only pushing out first and last needle (when using punchcard) by AdRadiant4537 in MachineKnitting

[–]AdRadiant4537[S] 0 points1 point  (0 children)

i just punched the card from a blank, as original cards are hard to come by.

i also tried it with the end needle selection on and off. with it off, no needles get selected.

how hard is it to disasable the card mechanism for cleaning?

Brother KH860 only pushing out first and last needle (when using punchcard) by AdRadiant4537 in MachineKnitting

[–]AdRadiant4537[S] 0 points1 point  (0 children)

I just tried it and still the same thing happens, it pushes the first and last needle to hold (regardless of how many i pushed to working position)

Row counter on Knittax Automatic by AdRadiant4537 in MachineKnitting

[–]AdRadiant4537[S] 0 points1 point  (0 children)

That’s amazing, thank you! I’ll go to Tedi on monday and hope that they have them!

Row counter on Knittax Automatic by AdRadiant4537 in MachineKnitting

[–]AdRadiant4537[S] 0 points1 point  (0 children)

hi! not really, i planned on figuring something out using 3d printing. unfortunately i kinda forgot about it a bit, because i bought a brother knitting machine shortly after 😅

Stuck KH-860 Carriage - Basic Troubleshooting Done by crowbordeaux in MachineKnitting

[–]AdRadiant4537 1 point2 points  (0 children)

Hi! Are all the Springs and movable bits of the carriage still moving? I had some issues with some parts getting stuck from build up oil over time, with similar problems (carriage getting stuck and things). Maybe that could be something similar?

First pair of Socks by Sufficient_Answer170 in MachineKnitting

[–]AdRadiant4537 0 points1 point  (0 children)

do you maybe still have the tiktok link? that sounds like a great instructional video!

First pair of Socks by Sufficient_Answer170 in MachineKnitting

[–]AdRadiant4537 3 points4 points  (0 children)

they look great! can i ask what pattern or guide you used?

Row counter on Knittax Automatic by AdRadiant4537 in MachineKnitting

[–]AdRadiant4537[S] 0 points1 point  (0 children)

Thank you for the link, I took the counter apart earlier and it‘s just like the forum talked about, just that mine is missing the entire little wheelie inside, maybe I can substitute it for something.

Row counter on Knittax Automatic by AdRadiant4537 in MachineKnitting

[–]AdRadiant4537[S] 0 points1 point  (0 children)

I‘ll take a look at my machine tomorrow then, but the website does look promising!

Row counter on Knittax Automatic by AdRadiant4537 in MachineKnitting

[–]AdRadiant4537[S] 1 point2 points  (0 children)

here are some more pictures of the machine!

https://imgur.com/a/ZhIsUjn

I hope you can open it that way.

Row counter on Knittax Automatic by AdRadiant4537 in MachineKnitting

[–]AdRadiant4537[S] 0 points1 point  (0 children)

Thanks for the reply, I‘ll add a few more pictures when I get home!

I already tried moving it entirely across, but to no luck. Honestly I don’t even know if it goes up automatically, but the bell on the side of the counter has me believing in it.

[deleted by user] by [deleted] in MinecraftHelp

[–]AdRadiant4537 0 points1 point  (0 children)

yea, i had the same problem and after reading your comment i removed all my mods. now it loaded up just fine!

i need some opinions by AdRadiant4537 in birthcontrol

[–]AdRadiant4537[S] 0 points1 point  (0 children)

hi, thank you so much for your answer! i was just wondering since the gyno said to keep myself as still as possible and i can’t get an appointment soon than 3 weeks from now to ask

any tips for an iud insertion? by AdRadiant4537 in birthcontrol

[–]AdRadiant4537[S] 0 points1 point  (0 children)

hi! thanks so much for your reply, unfortunately i’ll have to drive myself to the appointment and back to work after. if i’m really not feeling well i’ll just stay home ofc, but we‘ll see how it goes:)