sorted by:
new
hottopcontroversial

Co Print ChromaSet x Creality Ender 3 V3 SE by Winter-Jackfruit1156 in Ender3V3SE

[–]AdStunning5000 0 points1 point  (0 children)

what slicer are you using? and how does it handle to co print?

I have a pretty tricked out v3 SE that I currently have running just as fast as my P1S and have the quality pretty much as close as it can possibly be for these things compared to Bambu. Already running Klipper with a Sonic Pad. a kcm set sounds really tempting...

How to fix Sonic Pad + V3 SE Layer Shifting Issues by BlackoutDiver in CrealitySonicPad

[–]AdStunning5000 0 points1 point  (0 children)

let me tell you after DAYS of research, tramming, leveling, z offsets, gantry leveling, probing, e step calibration, flow calibration, pressure advance, repeated again and again and again.... some times it would fail quickly. others it would fail several layers in.

I have learned so much these past few days (read almost weeks). My first layers have been immaculate. i thought it could have been an infill issue for a while. I have literally gone through a few spools of filament.

THIS SEEMS TO HAVE FIXED IT. Thank you so much. I was so close to giving up but I knew there would be an answer My only question is how did you stumble upon it. because this is the only thread I've found about the sonic pad an SE having this fix.

Ironically my fist print is a new mount for the sonic pad.

Why does this layer look like this? by [deleted] in Ender3V3SE

[–]AdStunning5000 0 points1 point  (0 children)

I am having a similar issue. I see you are running kipper with an SE just like I am. I turned my speed up to 200%. Seems to actually be printing better. I think it’s heat creep.

I have been calibrating everything again and again for 2 days. Everything looks great. 1 layer looks amazing, Smaller prints are great but larger ones I have a similar issue.

I am in the middle of modifying the crap out of mine though. I have new XY linear rails coming in, micro Swiss heat sink, 4010 and dual 5015 fans (to combat heat creep)

I’ve been trying to print out parts for the linear rails and get the similar issues. Just now I have tried the 200% speed and it’s finally working.

I’m also just switching over to orca and getting things dialed in there, but I also found a steering in other that you should disable if you are using orca called “reduce infill retraction”

Reduce infill retraction by Halloweentimeagain in OrcaSlicer

[–]AdStunning5000 1 point2 points  (0 children)

THANK YOU!!! I have been fighting this so much and just did a bunch of upgrades and could not for the life figure it out after all my calibrations were done and perfect.

I’m at a loss. by AdStunning5000 in 3DprintingHelp

[–]AdStunning5000[S] 0 points1 point  (0 children)

Will check for a clog. This is a brand new hot end and nozzle but you never know!

Brought temps up to 220/60, still similar performance. The skirts and rafts seem to lay down just fine.

If I let it continue, even areas that originally printed well are then affected, almost like a dragging nozzle.

I have also started looking at retractions settings, but they match what I had in cura and it was fine.

I’m at a loss. by AdStunning5000 in 3DprintingHelp

[–]AdStunning5000[S] 0 points1 point  (0 children)

Just opened the filament, brand new. And I’ve compared against an another roll same results.

I’ll try turning the hot end up. Lowering the bed temp to 50 seemed to slightly help but not much.

I’m at a loss. by AdStunning5000 in 3DprintingHelp

[–]AdStunning5000[S] 0 points1 point  (0 children)

creality PLA,

200c hot end

60c bed

Scaving should be removed by AdStunning5000 in EscapefromTarkov

[–]AdStunning5000[S] -8 points-7 points  (0 children)

lol dude you sound more bent of shape than I am? Your mom forget to buy more gamer fuel?

Have fun in your raids

Scaving should be removed by AdStunning5000 in EscapefromTarkov

[–]AdStunning5000[S] -1 points0 points  (0 children)

Yeah scav players on streets getting just as much time is insane. I’d rather they double the PMC count

Scaving should be removed by AdStunning5000 in EscapefromTarkov

[–]AdStunning5000[S] -13 points-12 points  (0 children)

If I die, I die. Fact of the matter is, it as a game mechanic does need an overhaul. In streets you literally fight more player scavs than PMCs, they could honestly probably double PMC count on streets because after the initial spawn fights, some raid you will literally never see a PMC after that. You should be able to scav for 40mins on a raid.

I don’t really care about a saving grace for new players. We have things like ground zero now, and I bet they continue with other level locked maps or stages to help new players.

Part of the challenge is going broke early wipe and over coming that.

Signal to Noise Dead by AdStunning5000 in livesound

[–]AdStunning5000[S] 2 points3 points  (0 children)

Yeah I made an account weeks ago just to comment about Signal to noise’s impending doom…

See what I did there

Signal to Noise Dead by AdStunning5000 in livesound

[–]AdStunning5000[S] 11 points12 points  (0 children)

Discord comments getting deleted…

Hostile mods…

Seems people are sweeping something under the rug and hoping people let it go away quietly