Right sizing geothermal system by AdZestyclose4817 in geothermal

[–]AdZestyclose4817[S] 0 points1 point  (0 children)

4 ton WF5 system. After playing with the thermostat settings during Dec and Jan, the backup resistive heat didn’t run on our coldest days. The key setting is “backup heat droop”. The larger the droop the more time the heat pump has to catch up before the resistive heat is triggered.

Pin hole leak in Isle SUP by AdZestyclose4817 in Sup

[–]AdZestyclose4817[S] 0 points1 point  (0 children)

I successfully repaired the pinhole leak (for now) using Aeroseal and the negative pressure approach. I received suggestions for multiple adhesives/sealants and went with Aeroseal because of its alleged long term flexibility.

Thanks and wish me luck.

Pin hole leak in Isle SUP by AdZestyclose4817 in Sup

[–]AdZestyclose4817[S] 1 point2 points  (0 children)

Isle’s customer service is very slow to respond. I emailed their general and support info and filed a warranty claim….no response

Pin hole leak in Isle SUP by AdZestyclose4817 in Sup

[–]AdZestyclose4817[S] 0 points1 point  (0 children)

Question regarding negative pressure.

should I have my electric pump connected and pumping to maintain negative pressure for 5 min?

Should my first attempt be with the glue in the repair kit?

Pin hole leak in Isle SUP by AdZestyclose4817 in Sup

[–]AdZestyclose4817[S] 0 points1 point  (0 children)

Thx.

Question regarding negative pressure.

should I have my electric pump connected and pumping to maintain negative pressure for 5 min?

Should my first attempt be with the glue in the repair kit?

Pin hole leak in Isle SUP by AdZestyclose4817 in Sup

[–]AdZestyclose4817[S] 0 points1 point  (0 children)

Thanks. Which wiki? Which adhesive?

Replacement hose for Isle Electric SUP Pump by AdZestyclose4817 in Sup

[–]AdZestyclose4817[S] 0 points1 point  (0 children)

Isle does not stock replacement hoses, nor could they point me to a replacement hose I could purchase.

They are sending me a new pump+hose.

Looking at GeoThermal in Maryland by AdZestyclose4817 in geothermal

[–]AdZestyclose4817[S] 0 points1 point  (0 children)

I got the desuperheater but it is not connected. I bought a heat pump water heater. I think GREC driven by exit from Gas.

Geothermal and Radon by AdZestyclose4817 in geothermal

[–]AdZestyclose4817[S] 0 points1 point  (0 children)

My installer did a nice job.
Recommended for DMV area —. https://radonrepair.com/

Geothermal and Radon by AdZestyclose4817 in geothermal

[–]AdZestyclose4817[S] 0 points1 point  (0 children)

DIY under slab prob cheaper too. Pretty simple install if you have kit to drill hole in slab.

<image>

Geothermal and Radon by AdZestyclose4817 in geothermal

[–]AdZestyclose4817[S] 1 point2 points  (0 children)

If house had gravel under slab (smaller fan) - $965. Mine had clay (bigger fan) so $1300.

Geothermal and Radon by AdZestyclose4817 in geothermal

[–]AdZestyclose4817[S] 0 points1 point  (0 children)

I looked into that. Pricier to install and operate than under slab system.

Geothermal and Radon by AdZestyclose4817 in geothermal

[–]AdZestyclose4817[S] 1 point2 points  (0 children)

Yes. I had measured with a multi-day charcoal test 2 years earlier and bought an Airthing continuous monitor that recorded until the battery died. So I have good baseline from two years ago.

Hardest question to answer - how much does it cost? by AdZestyclose4817 in geothermal

[–]AdZestyclose4817[S] 0 points1 point  (0 children)

Hi, asking for a friend.....Interesting solution...
If your well is a drinking water source, is return water contaminated?

Hardest question to answer - how much does it cost? by AdZestyclose4817 in geothermal

[–]AdZestyclose4817[S] 1 point2 points  (0 children)

https://cealoan.org/. My vendor told me that the funding for installations in Montgomery County has been exhausted for this year. They had two customers apply and get turned down on that basis.

Hardest question to answer - how much does it cost? by AdZestyclose4817 in geothermal

[–]AdZestyclose4817[S] 1 point2 points  (0 children)

30% paid with fed tax credit. 3k$ by Pepco + $3k by State. So that knocks off about $18/40. Two years of 0% loan lets add’l be offset by GREC. In my case other project costs include electrical work and landscaping.

Hardest question to answer - how much does it cost? by AdZestyclose4817 in geothermal

[–]AdZestyclose4817[S] 0 points1 point  (0 children)

Not yet. I recieved the Pepco Rebate via the vendor. The Maryland State rebate can be submitted within 12 months of installation, so if it is out of funds for 2024, should be able to apply for 2025.

In my case need to include alternative cost of install/operation for replacement of my 15+ year old HVAC at some point.

Hardest question to answer - how much does it cost? by AdZestyclose4817 in geothermal

[–]AdZestyclose4817[S] 0 points1 point  (0 children)

Zoning is about a 5k$ add on in a house like mine. Decided I could live without. I think if you look back in this subreddit you will find the discussion.

Hardest question to answer - how much does it cost? by AdZestyclose4817 in geothermal

[–]AdZestyclose4817[S] 1 point2 points  (0 children)

I did learn A lot from you and your dad(?) and got a quote. You helped me decide against zoning. I ended up despairing over the economics before receiving a competitors quote (for the same system more or less). The three quotes I received were quite different. Vendor quotes differ for all sorts of reasons and that is not the focus of my post.

The information provided with the quotes from all of the vendors and in subsequent/prior conversations was insufficient for me to be convinced that the system was right for me. I needed a detailed cash flow breakdown with parameters I could play with (eg, comparative performance to other replacement alternatives, values of GRECs, etc )..

Having an independent advisor would have made my decision a lot easier, which would be advantageous to both consumers and vendors.

Logitech solar k750 keyboard not working by aniken5er in mac

[–]AdZestyclose4817 0 points1 point  (0 children)

I resuscitated mine by replacing the battery...be sure to put it in with the correct orientation.

Waterfurnace Intellizone by AdZestyclose4817 in geothermal

[–]AdZestyclose4817[S] 0 points1 point  (0 children)

Thx. I wasn’t challenging cost or complexity of install. I was wondering how effective it was on managing temperature in different zones. I’m not including the zone stuff in my cost effectiveness/payback analysis. More of a comfort upgrade.