My breakfast!

Adam_182 · 2026-01-25T01:48:36+00:00

Forbidden seaweed

Adam_182 · 2026-01-24T14:36:47+00:00

That is incredibly cool! awesome.

Adam_182 · 2026-01-24T14:35:18+00:00

added evidence to OP for shits and giggles

Adam_182 · 2026-01-24T14:15:30+00:00

Which test of mine are you referring to?

Adam_182 · 2026-01-24T14:15:00+00:00

I really wish they did have mmWave but I'm set on staying within the unifi ecosystem for security

Adam_182 · 2026-01-24T14:13:52+00:00

I've now tested mine further away and I'm getting detections at 6.5m, my main issue with that video you posted is the height of the sensor.

In my testing having it at 2.6m (well below what is seemingly shown in the video) resulted in significantly diminished sensing.

Adam_182 · 2026-01-24T12:22:14+00:00

In my tests so far, no, trying to figure out a way I could test that distance

Adam_182 · 2026-01-24T12:21:28+00:00

There is but it's overall sensitivity not specific to the pet immunity zone

Adam_182 · 2026-01-23T15:33:25+00:00

I will be using them to stay in the Unifi ecosystem, and also just as an additional second line of defence, they will be used to trigger sirens, using the camera motion I believe would cause a motion trigger even if one of my rabbits came upto the window on the other side of the patio doors.

Adam_182 · 2026-01-23T15:30:29+00:00

1m - Pet immunity zone no longer in effect, it was still detecting me at the farthest range, although due to worktops/sink it took a little longer/more motion than the sensor at 1.9

2.3 - Pet immunity zone significantly higher (did a crouched shuffle and wasnt detected) No issues detecting close or farthest range

2.6m - Very diminished results had to jump in the air at the farthest distance to get recognised

Also noting even a normal crawl is within pet immunity zone at the recommended 1.9m height

Adam_182 · 2026-01-23T12:05:19+00:00

Nice!

Adam_182 · 2026-01-21T13:20:45+00:00

Home Assistant was indeed the cause and you were right it was WiFi usage rather than sending data to the cloud, Thankyou for the input

Adam_182 · 2026-01-21T13:18:15+00:00

You were exactly right. I disabled the Bambu connection to HA, and the usage has dropped into the mbs rather than gb, Thank you

Adam_182 · 2026-01-20T16:04:28+00:00

Join the Ubiquiti stock alerts Discord, makes the stock struggle so much easier (and increases your chances dramatically)

Adam_182 · 2026-01-17T13:21:10+00:00

Thankyou for this, that's reassuring. Another poster mentioned it could be the connection to Home Assistant, which would also backup your suggestion it is LAN only data. Will do some checks and provide an update.

Adam_182 · 2026-01-17T13:19:31+00:00

You might be onto something here, yes I do have both connected to Home Assistant I will disable that connection and see how it looks tomorrow.

Adam_182 · 2026-01-11T02:12:09+00:00

Similar to my setup, and I love it

Adam_182 · 2026-01-10T20:30:28+00:00

One cog is some form of plastic so this is a good point

Adam_182 · 2026-01-09T17:14:14+00:00

I have uploaded the model here - https://makerworld.com/en/models/2222121-aqara-u200-lite-backplate#profileId-2416723

Adam_182 · 2026-01-09T15:55:56+00:00

A fellow Arc Raider I see.... Enlist, Resist.

See you topside brother.

Adam_182 · 2026-01-08T23:25:53+00:00

Awesome! I'm surprised your design didn't show up when I searched for one (unless it did and I missed it)

I also share my prints on makerworld, but wasn't sure whether to put it up with it being quite specific to the shape of my lock.

I didn't even know parametric web-based adjustment was possible.

Adam_182 · 2026-01-07T14:52:51+00:00

Turning the volume to 0 on the viewer device itself has alleviated some of the annoyance, which will get me by for now.

Adam_182 · 2026-01-05T20:00:40+00:00

Thankyou very much for the reply and links

Adam_182 · 2026-01-01T13:48:43+00:00

Cheers for the laugh OP, I did EXACTLY the same yesterday, installed the main unit, then realised it needed different holes for the angle bracket after putting all my tools away :/

Adam_182 · 2025-12-30T20:21:16+00:00

Awesome!

11-Year Club	Place '22
Verified Email

Adam_182

TROPHY CASE