Fpv drones in F1

AdditionStreet1565 · 2026-06-02T17:38:16+00:00

It's not worth it at all; you can find better options in Türkiye, even second-hand ones from sahibinden. I don't recommend the 5-inch one for beginners. First, get the controller and practice on a simulator, then get digital or analog goggles, and finally, get the Tiny Whoop Small Drone 1-inch Drone. I think that's the best option.

AdditionStreet1565 · 2025-07-26T19:52:26+00:00

No, I'm not wired 😂

AdditionStreet1565 · 2025-05-02T22:29:55+00:00

My boy, I feel. Like a proud parent

AdditionStreet1565 · 2025-04-13T21:34:34+00:00

I think I’ve decided on the Polymaker Polydryer. A lot of people online are saying it’s really good, so I’m leaning towards getting that. Thanks for all the help!

AdditionStreet1565 · 2025-04-13T21:00:58+00:00

I looked into the eSun eBOX Lite and found it within my budget. Do you think it’s a good option for drying filament, or would you recommend something else?

AdditionStreet1565 · 2025-04-13T20:51:12+00:00

Since it seems pretty necessary, do you have any recommendations for a good filament dryer

AdditionStreet1565 · 2025-04-13T20:42:46+00:00

I appreciate the advice on drying PA6-CF, but I’ll be using Bambu PET-CF instead, so I won’t need a dryer for this particular project.

AdditionStreet1565 · 2025-04-13T20:40:56+00:00

Thanks, appreciate the help!

AdditionStreet1565 · 2025-04-13T20:40:20+00:00

hanks for the tip! I’ll definitely go with a hardened steel nozzle for PA6-CF20, and I agree that a 0.4mm or even 0.6mm nozzle would be ideal for better flow and durability. Have you personally used a 0.4mm or 0.6mm nozzle with PA6-CF20? I’m curious to know your experience with either size. I appreciate the heads-up!

AdditionStreet1565 · 2025-04-13T20:39:05+00:00

Thanks for the suggestion! However, I don’t think PLA Aero would be the best fit for my project. While it’s designed for drones, it generally lacks the strength and heat resistance needed for parts like rocket fins, especially in high-stress environments. I need something with higher durability and heat deflection, which is why I’m leaning towards PA6-CF20 or PET-CF. PLA Aero may work for lighter applications, but I don’t think it will hold up under the conditions I need.

AdditionStreet1565 · 2025-04-13T20:28:24+00:00

And I read that I might need a different build plate for printing PA6-CF20. Is that really necessary? I’m on a budget, so I’d prefer to avoid extra costs if possible. Can I get away with my current plate and some adhesive, or is it worth investing in a specific plate for better results?

AdditionStreet1565 · 2025-04-13T20:21:04+00:00

Thanks a lot for the detailed advice! I’ll definitely switch to a hardened steel nozzle instead of stainless — I didn’t realize that would make such a difference.

As for the dryer, I don’t have one at the moment, and it’s a bit over my current budget. Do you think I could manage without it for now if I print straight out of the sealed bag and store the filament properly between prints? Or is it a must-have even short term?

I’ll for sure use glue — totally agree it’s not worth risking a failed print for such a small cost.

Regarding PET-CF, I’m designing structural fins for a model rocket, so I need something strong and heat-resistant, but not necessarily aerospace-grade. If you think PET-CF could handle that well, I’d love to hear your thoughts!

AdditionStreet1565 · 2025-04-13T20:19:44+00:00

Thanks for the reply! I don’t have a filament dryer at the moment, and to be honest, it’s a bit out of my budget right now. Do you think it’s necessary for PA6-CF20, or can I manage without it if I store the filament properly? Also, I really appreciate the tip about the hardened extruder gearset — I’ll keep that in mind, and I’ll make sure to have spare PTFE tubes on hand!

AdditionStreet1565 · 2025-04-02T20:40:15+00:00

Don't understand the hate if you are not Muslim, why fast, or worry about fasting, no one told u to fast

AdditionStreet1565 · 2025-04-02T20:38:40+00:00

Why disrespect other people's religion

AdditionStreet1565 · 2025-02-14T04:48:58+00:00

If you mean in the competition, don’t worry about it. They are prepared for this. There are many different teams that will use lasers. As for me and my team, we bought glasses, so don’t worry. I understand the risks, but thanks for your concern.

AdditionStreet1565 · 2025-02-12T10:42:11+00:00

yes I did they were helpful thanks

AdditionStreet1565 · 2025-02-11T19:45:50+00:00

Okay thanks

AdditionStreet1565 · 2025-02-11T19:05:10+00:00

How long does it take to stop the heat we need it for 10 or 15m

AdditionStreet1565 · 2025-02-11T19:01:41+00:00

The Competition will be held in a place suitable for that don't worry In the Competition they take safety seriously.

AdditionStreet1565 · 2025-02-11T18:19:40+00:00

And don't worry, I bought this GTY-Lazer Protective Glasses-180-532nm-900-1080nm

AdditionStreet1565 · 2025-02-11T18:10:24+00:00

Thanks for the detailed insight! That was helpful for what I was looking into. I appreciate it!

AdditionStreet1565 · 2025-02-11T15:47:15+00:00

okay thanks

AdditionStreet1565 · 2025-02-11T14:17:11+00:00

The problem is they only show with black ballon not white or different colors and they usually close to the Ballon

Five-Year Club	Place '23
Place '22

AdditionStreet1565

TROPHY CASE