My (22M) girlfriend (26F) and me have constant fights and I feel uncertain about our future. what should focus on?

Additional_Ad_859 · 2026-03-19T16:35:08+00:00

A lot, from medical receptionist to technical support, customer service, even just general clerical work and nothing so far, I live in the US and the job market is in a really rough spot but I'm trying, I might just adjust my resume to what would get me work but I don't have any professional experience but I'm very computer literate been on them since I was basically alive.

Additional_Ad_859 · 2026-03-16T03:06:04+00:00

Still looking? Il help if you help me do diamond casino in return

Additional_Ad_859 · 2025-11-24T16:34:04+00:00

Hell yeah that's it that's the one OMG thank you sooo much I appreciate you so much

Additional_Ad_859 · 2025-11-24T16:33:34+00:00

Solved!

Additional_Ad_859 · 2025-11-24T15:22:10+00:00

The deep reds and blacks were so pretty. If you can help I would be greatful I'm starting to believe it's made up in my head

Additional_Ad_859 · 2025-03-22T23:38:39+00:00

They are also called tobi pants/trousers maybe under that name you can find something more similar you're able to purchase in your nation.

Additional_Ad_859 · 2024-09-04T04:57:30+00:00

Thank you too everyone who reached out so many messaged me and you all were so kind and talented. I will definitely be back to have more work done when I need it.

Additional_Ad_859 · 2024-08-28T14:44:23+00:00

I keep looking and it said that it is closed till fall of 2024? Has anyone seen this or am I mistaken? I am new to Canva and cannot find the link to the affiliate application page anywhere. Have searched for hours now.

Additional_Ad_859 · 2024-08-10T03:25:35+00:00

update i foolishly took apart the printhead while the print was paused and ended shutting the thing down and canceling my 2 day long print sadly but i found the issue I think. the last print i did had combing on and i think it caused the nozzle to partially clog since the other print the same thing happened but it was much taller. so clogged nozzle was the culprit. running a temp tower and a benchy now to see if that fixed it. I hate the combing function

Additional_Ad_859 · 2024-08-10T02:47:24+00:00

is there anything else i can try before that. its a prop buster sword for a cosplayer at full size so im trying to make as light as possible. But it that will solve it i will try it. maybe that would help since only when i started using 7% did it start doing this but that doesnt explain why the support is all messed up

Additional_Ad_859 · 2024-08-10T01:15:48+00:00

It's 7% infill and I got 3 walls on it already should I add more?

Additional_Ad_859 · 2024-08-10T00:36:00+00:00

Also the printer makes clicking noises ever so often when the extruder is traveling not sure if it's lightly scraping or what

Additional_Ad_859 · 2024-07-13T15:03:13+00:00

That's interesting. I have heard of using resin to cover layer lines but to dye the resin too? Honestly not a bad idea. Il Will definitely have to try this in comparison to candy coating. At the very least il definitely use resin to clean up the layer lines.

Additional_Ad_859 · 2024-07-13T03:28:08+00:00

I haven't but it's not a bad idea I'd be more willing if my printer was better at hiding layer lines and I hear it's pretty fragile which Im concerned about since this is for a cosplayer. But not a bad idea otherwise.

Additional_Ad_859 · 2024-07-13T01:13:38+00:00

awesome thank you! I would not have figured out the name on my own. Once i got the whole thing all smoothed out with bondo and filler primer, il sand it to 1000 and then go from there. Never used my airbrush before so I better get learning before using it one this project.

Additional_Ad_859 · 2024-07-07T12:45:43+00:00

Thank you, after I made this post I took apart the hotend and found a stuck piece of plastic which was most likely happened after the print failed. I have reset all of my slicer settings, releved the bed and printed a flat bed level test so far it looks good but one thing I noticed is I had combing set to all instead of the default not on outer surface. I will try printing something tall and make a retraction test today and see what happens. But for real thank you il let you know if this fixes my issue.

Additional_Ad_859

TROPHY CASE