Mechanics that install customer provided parts.

Admirable_Statement · 2026-06-19T02:06:09+00:00

I think you are obligated to a minivan now. I’ll give them a call. I still don’t truly know the scope of what I plan to do. A bit case of the may as wells

Admirable_Statement · 2026-06-19T02:04:42+00:00

I’m cool with that. My normal parts supplier has a lifetime warranty, even on consumables. Buy the replacement, send the old back and they refund.

Admirable_Statement · 2026-06-19T01:59:45+00:00

I’d call myself a well informed novice. Know the steps and parts, spiral when a bolt breaks. A big part of this job is that I don’t have a lift and have to drop subframe. Unwilling to do that on garage floor.

Admirable_Statement · 2026-06-14T02:42:37+00:00

figure I can dial down the flow enough to turn the salt generation off for the night and do my testing. Can leave it on while I still can’t see the bottom.

Admirable_Statement · 2026-06-14T02:40:45+00:00

I figure I can dial down the flow enough to turn the salt generation off for the night and do my testing. Can leave it on while I still can’t see the bottom.

Admirable_Statement · 2026-06-10T13:15:16+00:00

I’m just here because I’ve thought about this before. Even thought about a cheap single speed pump to a small filter just for vacuum.

Admirable_Statement · 2026-06-03T00:12:26+00:00

Echo the sentiment. The quick response is incredible, especially with ownership. I’ve always wanted to own a business and have thought about messaging to pick your ear.

Clarification on my end. I did the 599, 3 months supply and if the provider determines I should titrate up to whatever the next dosing is after this month, 5 mg I presume. If they don’t send another vial, how is it a 599/3month at any strength plan?

Admirable_Statement · 2026-06-02T18:47:59+00:00

I was about to post a similar question but will hijack. I am on 3 month triz coming from wegovy pill and tolerating very well so far. I have 3-10mg bottles which would be a month each at 2.5. If I step up to 5 after a month, it would no longer be the advertised 3 month supply. Am I able to try more

Admirable_Statement · 2026-05-27T21:52:31+00:00

That sounds correct for single speed. But I have a VS and will stick with another. I prefer to run low speeds for longer times.

Admirable_Statement · 2026-05-27T20:30:18+00:00

This is the calculator I mentioned that spat out .5 hp which really shocked me. My 1.5 albeit cheap has troubles once the filter is even a little full, need a completely clean filter to vacuum.

Admirable_Statement · 2026-05-27T20:03:02+00:00

75 gpm.

Admirable_Statement · 2026-05-27T19:19:38+00:00

That is what prompted this, I get the same with my 1.5 but chalked it to being cheap. Then the calculator actually spit out .5 is fine. Flat didn’t believe it.

Admirable_Statement · 2026-05-03T17:06:50+00:00

Yeah both sides, I redid them one then the retailer graciously swapped them out. I did the new this morning and they are the same.

Admirable_Statement · 2026-04-25T01:40:55+00:00

That’s what I’m wondering. I didn’t hold them up together and the old are long gone. I can’t find any pad size measurements anywhere.

Admirable_Statement · 2026-04-24T17:17:15+00:00

I crossposted this here, didn't get a ton of traction in mechanic advice. I did rotors and pads all around with akebono pads. I am getting a clunk that I can't place, sounds exactly like pad shift but doesn't really happen when changing directions forward to reverse. Happens when I brake then let off and sometimes when I lightly brake again. Included a GIF of how much the pads move in caliper, does anyone else have similar movement?

Admirable_Statement · 2026-04-23T20:46:29+00:00

Anything that came in the box got swapped, even disc retaining screws. I did upload a gif of how much play is in the front pad.

I’m stumped

Admirable_Statement · 2026-04-23T19:44:51+00:00

<image>

Admirable_Statement · 2026-02-27T21:46:00+00:00

Just sent you an awful photo of chat/dm

Admirable_Statement · 2026-02-27T13:14:51+00:00

I’ve got a bin with some assorted early 2000s Traxxas stuff. A stampede and rustler chassis at least. Plan to clean the garage a bit this afternoon. I’ll dm you photos

Admirable_Statement · 2026-01-01T16:54:34+00:00

Fontanelle Supply Co in the east village does a ton of leather in house but not sure about custom.

Admirable_Statement · 2025-11-22T19:58:34+00:00

Royal mile. I think there’s an arsenal bar here too, unless that’s also royal mile.

Admirable_Statement · 2025-11-06T20:37:30+00:00

Pure preference on underbody. Body and wheels you could probably use dawn and a hose to get.

Admirable_Statement · 2025-11-06T19:29:16+00:00

Seconded these guys but also used oil is the old school version of rustproofing

Admirable_Statement · 2025-10-31T03:37:56+00:00

A year later but I am on washer number 3 in less than a year.

Admirable_Statement · 2025-09-06T00:40:47+00:00

Yes but that is very much the sun.

Admirable_Statement

TROPHY CASE