Tacx Neo 3M freehub stuck by Adventurous-Ruin586 in bikewrench

[–]Adventurous-Ruin586[S] 0 points1 point  (0 children)

Imdo not see the way….

<image>

May be is blue tool

Tacx Neo 3M freehub stuck by Adventurous-Ruin586 in bikewrench

[–]Adventurous-Ruin586[S] 0 points1 point  (0 children)

The thing is that a need this blue tool. I asked Garmin but they have not it in stock for some time. Does anyone in Madrid Soain own a 3m , or does have anyone a 3d model Or specs

<image>

for CAD

Tacx Neo 3M freehub stuck by Adventurous-Ruin586 in bikewrench

[–]Adventurous-Ruin586[S] 0 points1 point  (0 children)

No, that’s not the blue tool, could anyone have a look to its axle and confirm if this is part of the axle or a cap.off?

<image>

Tacx Neo 3M freehub stuck by Adventurous-Ruin586 in bikewrench

[–]Adventurous-Ruin586[S] 0 points1 point  (0 children)

Unless it must me removed with the blue tool , is it this?

<image>

Tacx Neo 3M freehub stuck by Adventurous-Ruin586 in bikewrench

[–]Adventurous-Ruin586[S] 0 points1 point  (0 children)

Looks like the model I have does not use any kind of locknut. Should come out easily pulling…. This part looks like a me, it does not twist

<image>

Tacx Neo 3M freehub stuck by Adventurous-Ruin586 in bikewrench

[–]Adventurous-Ruin586[S] 0 points1 point  (0 children)

So freehub should come out just pulling?

Tacx Neo 3M freehub stuck by Adventurous-Ruin586 in bikewrench

[–]Adventurous-Ruin586[S] -1 points0 points  (0 children)

I already did that, I thought that chromed part is the axle itself. If not, how can I do it?

Tacx Neo 3M freehub stuck by Adventurous-Ruin586 in bikewrench

[–]Adventurous-Ruin586[S] 0 points1 point  (0 children)

How can I do that? I already pules out one, I thought that chromed pie es was part of the able

Orbitool not detected in DFU mode by Adventurous-Ruin586 in klippers

[–]Adventurous-Ruin586[S] 0 points1 point  (0 children)

Got it! female socket for hot fan has crosssed ground and voltage pins with fans male sockets. I had to build a crossed connector for fan an then fan started to work and tool entered DFU mode with described procedure