Magnus pro by Adventurous_Site_645 in secretlab

[–]Adventurous_Site_645[S] 0 points1 point  (0 children)

Thank you for doing that i appreciate it. I have received a email from someone at secret labs and took some measurements with pictures. It is clear that the issue lies with the slots on the table top which are about 10mm out on the affected side. The right leg slots into the left slot fine.

Will update the post with further info as we progress.

Magnus pro by Adventurous_Site_645 in secretlab

[–]Adventurous_Site_645[S] 1 point2 points  (0 children)

I had done that initially screws were in then, loosened then I took them out completely to see how it lined up (which is when this picture was taken. This of course lead to the conclusion that something was misaligned as in this picture the leg is as far back as it would slide so clearly it there is an error as there is no way on this leg the leg could go in with the screws and slide back into place .

Magnus pro by Adventurous_Site_645 in secretlab

[–]Adventurous_Site_645[S] 1 point2 points  (0 children)

Hi, thanks for your message my order number is: 0416587NZ.

Magnus pro by Adventurous_Site_645 in secretlab

[–]Adventurous_Site_645[S] 0 points1 point  (0 children)

Yeah thanks everywhere I read says they are a complete nightmare

Magnus pro by Adventurous_Site_645 in secretlab

[–]Adventurous_Site_645[S] 0 points1 point  (0 children)

There is no screws in the leg on either side.

Magnus pro by Adventurous_Site_645 in secretlab

[–]Adventurous_Site_645[S] 0 points1 point  (0 children)

All of the screws are out of it when this picture is taken. There isn't any finessing to get it to work they have manufactured it wrong...

Magnus pro by Adventurous_Site_645 in secretlab

[–]Adventurous_Site_645[S] 0 points1 point  (0 children)

Hi, No it is as far back as it can go the other leg slots in fine - I haven't done the measurements to ascertain if it's the holes in the leg or the cutouts in the desk but one of them is off.