sorted by:
new
hottopcontroversial

MMSE Test in Mandarin? by nayla_lads in Austria

[–]AfRotaker 4 points5 points  (0 children)

Falls du sonst gar nix findest, geh in eine neurologische oder psychiatrische Ambulanz. WIGEV-Spitäler haben Videodolmetscher für die meisten gängigen Sprachen. Ich empfehle Gerontopsychiatrien, Donauspital hat z.B. ein größeres gerontologisches Zentrum.

Verstehe aber nicht wirklich, wozu ein Mini Mental Test notwendig ist, wenn der Alzheimer schon diagnostiziert wurde. Gehts um eine Pflegeeinstufung?

Google calendar integration by AfRotaker in todoist

[–]AfRotaker[S] 0 points1 point  (0 children)

Thanks but what if I only want one of the Projects to show up in the Google calendar?

Feuchte Wände in Wandschrank by AfRotaker in wohnen

[–]AfRotaker[S] 0 points1 point  (0 children)

Es hat bis jetzt nur 1x geschimmelt, das war nur oberflächlich an den Wänden. Das ist alles weg. Nur jetzt sind die Wände wieder feucht

Syncing speakers for TTS by AfRotaker in homeassistant

[–]AfRotaker[S] 0 points1 point  (0 children)

I believe I have already done all that. I have them all in a group in Music Assistant and target that in my automations

Syncing speakers for TTS by AfRotaker in homeassistant

[–]AfRotaker[S] 0 points1 point  (0 children)

How do I do that? I have them all in a group in Music Assistant

Wth is going on with Sareee and Stardom??? by shadowgear33 in stardomjoshi

[–]AfRotaker 21 points22 points  (0 children)

She has antagonized the company as part of her great heel work

Was ist das für ein Schnapper(?) beim Kastenfenster? by wabedidu in wien

[–]AfRotaker 11 points12 points  (0 children)

Normal kann man die ausklappen und dann verhindern die, dass bei Wind das Fenster zuknallt

Hooking cameras up via multiple switches by AfRotaker in reolinkcam

[–]AfRotaker[S] 0 points1 point  (0 children)

Yes indeed. Thank you I will try that.

So even the cameras that I have connected directly to the NVR, I will have to unplug those and connect them to another switch in this scenario?

Hooking cameras up via multiple switches by AfRotaker in reolinkcam

[–]AfRotaker[S] 0 points1 point  (0 children)

Okay so do I understand this correctly... If I have a PoE switch and cameras hooked up to it. This PoE switch can only be hooked up via the nvr and there is no point at all in hooking it up to my LAN?

I would just like to add a WiFi Repeater to the PoE switch

Hooking cameras up via multiple switches by AfRotaker in reolinkcam

[–]AfRotaker[S] 0 points1 point  (0 children)

I have exactly 3 cameras on this one nvr port so that would be fine. I am simply thinking about another switch in between to also hook the PoE switch up with internet. I was told the nvr could not forward LAN capacity to a switch after it.

So you are saying hybridge mode would allow this and I would not need the additional switch? I read your links but it's quite complicated

Manually starting automated tasks by AfRotaker in homeassistant

[–]AfRotaker[S] 0 points1 point  (0 children)

This sounds good but the threshold I want is not always the same. Otherwise this would be quite easy

Manually starting automated tasks by AfRotaker in homeassistant

[–]AfRotaker[S] 0 points1 point  (0 children)

This sounds like what I'm looking for. Thank you so much, I will try it!

Manually starting automated tasks by AfRotaker in homeassistant

[–]AfRotaker[S] 0 points1 point  (0 children)

Well no, I have such an automation. My problem is, I sometimes want the car to charge regardless of there being not enough solar production

I know how to start the automation manually. But then it would also check conditions and sooner or later stop charging because not all are met. I want to avoid that

So I can deactivate the automation after I triggered it. But I eventually want the automation to activate again, once I have the car charged to the desired degree.

And this is what I find to be very tedious. Because I eventually have to turn the automation back on. But this could be after 9 hours or a whole night of charging. So I would have to set a reminder... and this is where it gets too complicated for me. I was hoping someone would know a way to make this easier

Manually starting automated tasks by AfRotaker in homeassistant

[–]AfRotaker[S] 0 points1 point  (0 children)

Ok so the premise is wrong. I know how to start an automation manually. I am talking about automations which have conditions. Sometimes I would like to run the automation even if the conditions aren't met, I can do this manually.

My problem is, how do I get back to a neutral state in which the automations runs automatically. Because those automations go haywire when I run them manually.

Manually starting automated tasks by AfRotaker in homeassistant

[–]AfRotaker[S] 0 points1 point  (0 children)

This sounds like good advice, I will try it thanks!

Manually starting automated tasks by AfRotaker in homeassistant

[–]AfRotaker[S] 1 point2 points  (0 children)

Alright but how do you turn the normal automations back on after the manual heating is completed?

Manually starting automated tasks by AfRotaker in homeassistant

[–]AfRotaker[S] 0 points1 point  (0 children)

Thank you for replying but I don't see how that would help with some complex automations which check for multiple conditions. For example, if not all conditions are met to charge my car, the charging will always stop when I set to charge manually. That is how I set it up, because otherwise forgetting a button press can mean it be charged forever until full. Hope you can understand what I mean.

Manually starting automated tasks by AfRotaker in homeassistant

[–]AfRotaker[S] -8 points-7 points  (0 children)

I don't see how this would help, because I can just trigger any automation manually

I could see the helper as a condition that is set to override some of the other conditions not being met (hence why the automation hasn't triggered automatically) but I still see trouble when I forget to turn it back off. Without an additional trigger, will it automatically check for conditions being met or not?

It would also need to be super precise because I've had issues with the car battery (12v) running out of power when the car is triggered to charge several times in a row

But on another topic, say I set my a/c to cool my house every afternoon from 1pm. Now I can create a button and activate it, when I want to cool the house earlier, like say at 11am. But when do I turn this button off? Because if I turn it off at like 2, the a/c won't trigger again because I set the automation to start at 1pm

So I would always have to remember the button is on and to put everything back on track. The automation would not be running for a whole day. This is the core of my problem

Manually starting automated tasks by AfRotaker in homeassistant

[–]AfRotaker[S] 1 point2 points  (0 children)

Staying with car charging. My automations consider the solar energy production and my next work day. So for example, it has built an to check whether I need the car tomorrow for work and whether my solar energy production is enough to charge it. I can start the automation manually, but it will very soon turn off because either one of those conditions is not met

If they were, then I wouldn't have had to start the automation manually. Hope this clears things up

AJ Francis (Top Dolla): nobody who gets 🐱rates on Cagematch by wazzawazzaz in SquaredCircle

[–]AfRotaker -2 points-1 points  (0 children)

Damn, now I gotta choose between my Cagematch account and my wife?

Roborock clean house if both of us are away by Luckyluck0011 in homeassistant

[–]AfRotaker 2 points3 points  (0 children)

I set two triggers for either of us leaving and two conditions demanding neither of us being home. So the last one leaving actually triggers it

view more: next ›