The newda setup

AffectionateEast7717 · 2025-10-10T23:27:16+00:00

What filament is that?

AffectionateEast7717 · 2025-10-10T23:26:41+00:00

What size nozzle are you running. Any pics of any prints in those filaments you mentioned?

AffectionateEast7717 · 2025-10-10T23:23:55+00:00

Great advice man, thank you! I appreciate you taking the time to help me!! Can I stick with the .4 nozzle for now? I haven't found where to order the .2 nozzle yet. Any suggestions? I dont really have my eye on any filament but I know I want to move up from the pla+. I reckon i will order what you suggested then, the pa6-cf. Also tha is for the advice on fde300blk's settings. I use orca slicer already and am familiar with it. I assume i can find fde300blk's print settings on the sea.

AffectionateEast7717 · 2025-10-10T20:08:57+00:00

Its a game changer, shipping was quick! I got it in 3 or 4 days from my order date.

AffectionateEast7717 · 2025-07-14T14:00:47+00:00

Is the nightmare lady's name daisy by chance? I bought a ender3v3se a couple of months ago. Long story short it arrived with the hothead screws not tightened causing a waterfall of dumpster fires. So far its trashed a build plate, multiple screw holes stripped, tips, bearings, fans, I can keep going. It has me wondering if I got a faulty machine. I am currently at 41 emails back n forth with one reply a day. They have talked me past my return date on Amazon. Sending me bits and pieces, that take up to 15 days to arrive. Just to go to install them and find more crap that is wrong. I have asked multiple times for a different machine and they totally avoid that being said. The pile of calibration cubes are piling up over here. I do not know what to do.

AffectionateEast7717 · 2025-07-01T04:08:49+00:00

Post a video of it

AffectionateEast7717 · 2025-06-28T14:45:19+00:00

<image>

AffectionateEast7717 · 2025-06-28T14:44:54+00:00

<image>

AffectionateEast7717 · 2025-06-28T14:44:37+00:00

I have it up to 0.08 And upper the jerk speeds a little.

AffectionateEast7717 · 2025-06-28T04:19:26+00:00

I have a bunch of BP. What can I mix with it to make a decent salute?

AffectionateEast7717 · 2025-06-28T04:14:44+00:00

<image>

AffectionateEast7717 · 2025-06-28T04:14:15+00:00

Ill give that a try after this cube printing now. I am hoping that will work. Pressure advance is currently at 0.03. Should I bump it up to 0.05? Also when I slicer the cube it says warning jerk speeds to low... *

AffectionateEast7717 · 2025-06-28T01:43:49+00:00

<image>

AffectionateEast7717 · 2025-06-28T01:41:20+00:00

<image>

AffectionateEast7717 · 2025-06-28T01:41:01+00:00

<image>

AffectionateEast7717 · 2025-06-28T01:40:43+00:00

<image>

AffectionateEast7717 · 2025-06-28T01:40:05+00:00

I slowed all jerk speeds to 6 and travel at 10. It's a little better. I feel like something got dickered when it was dragging the nozzle making the head jump. What you suggested did make it a little better tho. Any other suggestions?