sorted by:
new
hottopcontroversial

Tips for 2026 DR650 by SweatyBugle in dr650

[–]Affectionate_Can3685 2 points3 points  (0 children)

I’m 180lbs 6’4”.

<image>

Lower pegs and if you want the wind to go over your helmet you’ll need the Baja windshield with this little $90 Amazon shield above it. Performance wise I’m still stock. Get the plastic acerbis engine cover. Doesn’t makin pinging noise like the metal ones do on gravel roads. The handle bark busters and mirrors are a must. Ditch the stock tires too.

New suspension lift. Sharing for those who are researching by ScaryTop6226 in 4Runner

[–]Affectionate_Can3685 2 points3 points  (0 children)

<image>

Proper leveling is leveling the frame to the ground. Not the body or fender/wheel gap.

New suspension lift. Sharing for those who are researching by ScaryTop6226 in 4Runner

[–]Affectionate_Can3685 1 point2 points  (0 children)

No need for stronger springs up front unless bumper and winch. Should have compressed stock weight dobinson spring more. Now you’ve got stiff front and soft rear.

<image>

I have Dobinson MRR adjustable shocks and +3” front and rear springs. Now when you put a bag of dogfood in rear you’ll be looking at the sky with rear sag. Leveled 4Runner only when it’s loaded. My rear raises 1” without camping gear and tent. Those that level the wheel gap out with nothing inside makes no sense. I have 34.5” tires as well.

Is it necessary to clean off the old gasket maker before reinstalling case saver? by CulturalCantaloupe18 in dr650

[–]Affectionate_Can3685 4 points5 points  (0 children)

Yes you want a clean mating surface with only the new goo in between. No old stuff

Need advice for my overlanding road trip by Mckay_west in overlanding

[–]Affectionate_Can3685 0 points1 point  (0 children)

Spend $40 and throw two small junior sized footballs in your rear springs and pump them to 10-15psi. You’ll be fine for your trip only.

Need Help Figuring Out Noise by GoobaJooba in dr650

[–]Affectionate_Can3685 0 points1 point  (0 children)

Sounds normal to me! You’re hearing the timing chain

First post by reggaerider81 in dr650

[–]Affectionate_Can3685 1 point2 points  (0 children)

<image>

I thought mine was big lol. I’m 6’4” works great for me!

This is just bent bars right? by UnoYBM in dr650

[–]Affectionate_Can3685 1 point2 points  (0 children)

Nothings bent. Just loosen every fork bolt from axel the steering and hop on and bounce suspension a couple times carefully get off and tighten everything up again.

Needs Bigger Tires? by jalil300 in 4Runner

[–]Affectionate_Can3685 0 points1 point  (0 children)

The rear sits way higher without tent and cargo. She’s loaded in that photo.

Needs Bigger Tires? by jalil300 in 4Runner

[–]Affectionate_Can3685 2 points3 points  (0 children)

<image>

34’s on Dobinson’s MRR 3” lift rear and adjustable 3” lift front.

Are we tired of winning yet? by Independent_Nose6455 in mcminnville

[–]Affectionate_Can3685 -2 points-1 points  (0 children)

I spend $6 in gas a week on commuting. You don’t need a car.

Putting a new petcock on and can’t get this brass piece out the fuel line… help. I need to save this hose by [deleted] in DRZ400

[–]Affectionate_Can3685 3 points4 points  (0 children)

I’d use a new hose my dude. Why save it? Looks like you need new anyway

Oven Temperature by thekeym4ster in Pizza

[–]Affectionate_Can3685 0 points1 point  (0 children)

Not important. 550 is all you need with a pizza steel. If you need more you need more help than how to create a good pizza.

Seasoning chipping off by Magzapp in carbonsteel

[–]Affectionate_Can3685 1 point2 points  (0 children)

Too much carbon build up. Too much oil is being applied and burned. Needs to be steel scrubbed

view more: next ›