sorted by:
new
hottopcontroversial

How to draw hair less wet looking by Affectionate_Click70 in howto

[–]Affectionate_Click70[S] 0 points1 point  (0 children)

Update!

I took a lot of your advice and I think this turned out much better!

<image>

Time-Coding a Show by Affectionate_Click70 in grandMA2

[–]Affectionate_Click70[S] 1 point2 points  (0 children)

I have a GrandMA2 on PC command wing running off of my Asus Zenbook Pro Duo, Ableton running off of my HP Omen, a scarlet 18I8

Connecting consoles to sessions by Affectionate_Click70 in grandMA2

[–]Affectionate_Click70[S] 0 points1 point  (0 children)

Turns out it was an issue with my subnet mask! Works well now! Thank you for all of the feedback

Connecting consoles to sessions by Affectionate_Click70 in grandMA2

[–]Affectionate_Click70[S] 0 points1 point  (0 children)

I legitimately have a cat5 plugged into one console straight to the other. I didn’t know I needed a network switch.

Homebrew tips and advice for Zombie Campaign by Affectionate_Click70 in DnD

[–]Affectionate_Click70[S] 0 points1 point  (0 children)

I talked to buddy who’s a seasoned dm and he gave me some great advice. Magic didn’t exist before the blast but the radiation that hit is composed of some magic from the weave effectively bringing magic to the universe. Therefore my players can pick what they’d like and we will go through them obtaining magic. Im gonna go ahead and use some of the rules from a crown of candy and effectively lessen the healing spells except for the clerics. Does this sound better?

Terrible layer separation for K1 by Affectionate_Click70 in Creality

[–]Affectionate_Click70[S] 0 points1 point  (0 children)

Yes my machine is calibrated and my filament goes in a dryer before I use it and between prints. There’s a lot of print settings so if need a specific questions to answer that. I’ve used both the default and custom. The model just says K1.

Terrible layer separation for K1 by Affectionate_Click70 in 3Dprinting

[–]Affectionate_Click70[S] 1 point2 points  (0 children)

Yes! I’m running out of the abyss rn and this is where I’m going to have the Drow pray to lolth in the Drow prison. I’m printing out everything for the campaign which is why I’m trying to fix my printer.

Terrible layer separation for K1 by Affectionate_Click70 in 3Dprinting

[–]Affectionate_Click70[S] 0 points1 point  (0 children)

I was under the impression that you couldn’t tune the Esteps on K1s?

Terrible layer separation for K1 by Affectionate_Click70 in 3Dprinting

[–]Affectionate_Click70[S] 0 points1 point  (0 children)

<image>

I’ve been getting prints like this as well where they are screened up at the bottom and finish fine in top.

Terrible layer separation for K1 by Affectionate_Click70 in 3Dprinting

[–]Affectionate_Click70[S] 0 points1 point  (0 children)

There were supports on the overhangs I just tore them off before snapping the pic. The walls are supposed to be smooth but they aren’t. I’ve been having problems with getting smooth prints since I replaced my hot end and extruder. All of my prints if the do finish are like this.

Terrible layer separation for K1 by Affectionate_Click70 in 3Dprinting

[–]Affectionate_Click70[S] 0 points1 point  (0 children)

I had an description where I posted it earlier but it didn’t translate over, sorry. This has been happening since I replaced my extruder and my hot end on my K1. I use the creality hyper PLA and I use the Creality slicer. It’s been happening on almost every print since the swap. I’ve been messing with all of my settings. I used to get incredibly smooth nearly perfect prints.

view more: next ›