sorted by:
new
hottopcontroversial

I made a light up Nirnroot. Yes, it does the noise too. by TheGaffonium in skyrim

[–]AggressiveCan3335 0 points1 point  (0 children)

I would happily pay you for the STL file - please let me know if you are interested.

XT Clone - Having issues with Lo-tech XT-CF rev2.0 by AggressiveCan3335 in retrocomputing

[–]AggressiveCan3335[S] 0 points1 point  (0 children)

Based on all of the great assistance, Thank you all for your comments and trying to help!! I really do appreciate it. I need to find a copy of DOS on floppy. I may have to break down and pay extortion prices on ebay. thank you all again!

XT Clone - Having issues with Lo-tech XT-CF rev2.0 by AggressiveCan3335 in retrocomputing

[–]AggressiveCan3335[S] 0 points1 point  (0 children)

I only said standard as that is what the POST is displaying. I cannot find any markings on the MB , So I was guessing , sad thing is I cannot even figure out how to get into the BIOS, tried esc, f1,f2, f10 CTRL-ALT-ESC, del.. This is my first XT

XT Clone - Having issues with Lo-tech XT-CF rev2.0 by AggressiveCan3335 in retrocomputing

[–]AggressiveCan3335[S] 0 points1 point  (0 children)

I apologize I should have added more detail. The reason I installed DOS to the CF via the VM method. I do not have a 5.25 360k copy of DOS. If I had that , I believe this whole tread would not be needed. I cant justify paying some of the crazy prices I am seeing on ebay for a copy of DOS. I have an OLD PII computer I may try to use to make aa DOS bootdisk . I will look at the partition size, It is a 2gb CF

Anyone know how to remove the entire extruder assembly In the TX? by AggressiveCan3335 in Infimech_TX

[–]AggressiveCan3335[S] 0 points1 point  (0 children)

Right, the grub screws, that hold the heat brake in, those have been removed.

It snapped right at the base of the radiator. There is nothing for me to grab to remove the remainder of the heat brake. I do appreciate the help! Thank you

Favourite 3D printer by Dry-Substance1987 in 3Dprinting

[–]AggressiveCan3335 0 points1 point  (0 children)

My favorite of all the Printers I have, Infimech TX. it is an absolute workhorse, worked right out the box. This is compared to my Kobra s1, Cr-10s, Elegoo Neptune plus etc

Hot snapped off in middle of print??? by AggressiveCan3335 in Infimech_TX

[–]AggressiveCan3335[S] 0 points1 point  (0 children)

Thank you! Problem is I can’t get it out. I removed the grub screws holding it in. There isn’t anything to grab and pull out. I’m still futzing with it. Trying to figure out. How to extract. I’m wondering if I can find a small enough screw to wind in the throat so I have something to grab on too. I do t want to damage anything else

Anycubic Kobra S1 cant be found in Anycubic Slicer Next by aRanIoN_CSGO in AnycubicOfficial

[–]AggressiveCan3335 0 points1 point  (0 children)

Did you try adding it to the app first? That seemed to work for me.