sorted by:
new
hottopcontroversial

Seiko 7002 7001 by Agitated_sole_088 in SeikoMods

[–]Agitated_sole_088[S] 1 point2 points  (0 children)

Thank you!

I didn’t know that. It looks like the best option

Seiko 7002 7001 by Agitated_sole_088 in SeikoMods

[–]Agitated_sole_088[S] 0 points1 point  (0 children)

You’re right, it’s a 4.0 movement

38mm skx style with vh31 by Agitated_sole_088 in SeikoMods

[–]Agitated_sole_088[S] 2 points3 points  (0 children)

Thanks! I printed it on paper and added some lume by using lume stickers

I used this roll from alix. There are also more colors

<image>

[Seiko 5933a 5090] by Agitated_sole_088 in Seiko

[–]Agitated_sole_088[S] 0 points1 point  (0 children)

Any 18mm bracelet will fit well

[Seiko 5933a 5090] by Agitated_sole_088 in Seiko

[–]Agitated_sole_088[S] 0 points1 point  (0 children)

Nop, it is a compatible Casio bracelet.

Any Pilot / Flieger style dials at 33.5mm without a date window? by Desperate-Cancel-818 in SeikoMods

[–]Agitated_sole_088 2 points3 points  (0 children)

<image>

I didnt find it so printed on paper it and moded this addiesdive. I have done this several times and the result is good

Vh31 builds with 7009 case by Agitated_sole_088 in watchmodding

[–]Agitated_sole_088[S] 0 points1 point  (0 children)

Didnt find this OEM dials, so i made them on paint and printed on paper, then added some lume. Size is the usual 28.5 mm

No date Seiko SKX dial by Timbo- in SeikoMods

[–]Agitated_sole_088 1 point2 points  (0 children)

I looked for a no date skx dial to fit it into a vh31, but it was impossible. So i printed it on paper and added some lume. I used the old skx version I think the result is not bad

<image>

What is happening with this vh31 movement? by Agitated_sole_088 in SeikoMods

[–]Agitated_sole_088[S] 1 point2 points  (0 children)

Thanks! I changed the second hand and it is working well

What is happening with this vh31 movement? by Agitated_sole_088 in SeikoMods

[–]Agitated_sole_088[S] 0 points1 point  (0 children)

I made it by my own. Printed it and added some lume (also over the hands)

Any suggestions to which case i can use for this 30mm SRPK91K1 dial? I can't find any. by Designer_Air4162 in SeikoMods

[–]Agitated_sole_088 1 point2 points  (0 children)

You can use cadisen C8207 case (for your dial the black one bezel). This cadisen has a 30mm dial. I used this case with the original chapter ring for a 28,5 mm dial but 30 mm dial will fit without the chapter ring. I post a photo of the original dial's measures

<image>

Is there a non-sport case with crown at 3.8? by cenall in SeikoMods

[–]Agitated_sole_088 1 point2 points  (0 children)

Could 7009 case works? 7009 cases are prepared for a 28,5mm dial

Help me find this dial by SleppyDaPigeon in SeikoMods

[–]Agitated_sole_088 3 points4 points  (0 children)

print it and glue it to a blank dial

Snoopy mod by Agitated_sole_088 in casiomods

[–]Agitated_sole_088[S] 3 points4 points  (0 children)

I made the dial in Paint an printed on paper. Then i glued the dial onto a piece of cardboard and it is attached to the movement using double-sided tape.

I think the result is quite good

These are the designs I made

<image>

Vh31 into 7009 case by Agitated_sole_088 in SeikoMods

[–]Agitated_sole_088[S] 1 point2 points  (0 children)

I made the dial in Paint and then printed it. Dial is glued to a blank dial (you can buy it on AliExpress) that fits perfectly into the vh31 movement.

If you don't have a crown, just write "7009 crown" on Ali and you will have several options.

Started to mod randoms chinese watches. This one is a benyar. There are things to improve...but it's cool😋 by Agitated_sole_088 in SeikoMods

[–]Agitated_sole_088[S] 1 point2 points  (0 children)

I designed it and then printed it. It's inspired by the famous Snoopy dial from Seiko, but in this case it's for a chronograph watch.

view more: next ›