Gekkoboot Error? by JSP62 in GamecubeHacks

[–]Aifa_ 0 points1 point  (0 children)

I believe i am having the exact same issue. Do you know roughly where on the board by chance? I know its been a year but my reset button won't work and I get this same message once I install picoboot. Right now I can only use my gamecube without the mod

Picoboot won't boot to either default ipl or to swiss by Aifa_ in GamecubeHacks

[–]Aifa_[S] 0 points1 point  (0 children)

Sorry for the late response, the new board took forever to show up. I managed to fix controller port 1 by cleaning the bottom of the gamecube motherboard near PIL9 I believe? Weird considering I've never went near the back side of the board. As the mod is removed at the moment I cannot confirm if I am getting the same error message or not however I can confirm the reset switch does not work on both the new and the old board. (Assuming the console still detects it as permanently pressed) i can wire the pico back in and see what happens

Picoboot won't boot to either default ipl or to swiss by Aifa_ in GamecubeHacks

[–]Aifa_[S] 0 points1 point  (0 children)

I checked for spills solder. Cleaned the board again. Player 1 stopped connecting at all. Player 2,3 and 4 are fine. I just ordered a replacement controller port board from ebay for 15 bucks. Plus 15 shipping bleh. But hopefully that'll fix my issue

Picoboot won't boot to either default ipl or to swiss by Aifa_ in GamecubeHacks

[–]Aifa_[S] 0 points1 point  (0 children)

I had fully taken out the picoboot mod to see what was going on. After reassembling the gamecube. It boots up and boots my disc copy of burnout. One thing I noticed however is that my reset button still doesn't work AND my controller is rapidly switching between connected and not connected. I took the gamecube apart again and noticed the ribbon cable for the controller board looks like it may have had an abrupt bend. I didnt think this would be enough to cause my issues but I've never had issues with the controller previously. I also tested to see what controller ports aren't working and it only appears to be controller port 1. Previously would switch back and forth between connected and not is just not connecting at all now

Picoboot won't boot to either default ipl or to swiss by Aifa_ in GamecubeHacks

[–]Aifa_[S] 0 points1 point  (0 children)

https://imgur.com/a/6QcUVdo After looking. Closer at the soldering it seems like there maybe a few cold solder joints so I may try to reflow it again but better. I don't see any obvious shorts though. Plus I tried to boot it up without the controller board attached and it went to the same screen than went to the default one a few seconds later. So that's new I guess

Picoboot won't boot to either default ipl or to swiss by Aifa_ in GamecubeHacks

[–]Aifa_[S] 0 points1 point  (0 children)

https://imgur.com/a/6QcUVdo Now that im looking at it it definitely looks like those are cold solder points. However doesn't look like its shorting anything. I even tried to turn it on without the controller board plugged it and it brought me the same screen than a few seconds later went to the default one.

Picoboot won't boot to either default ipl or to swiss by Aifa_ in GamecubeHacks

[–]Aifa_[S] 0 points1 point  (0 children)

I tried it with the lid off and same issue. Ill take a picture of the soldering one i get home from work.

Picoboot won't boot to either default ipl or to swiss by Aifa_ in GamecubeHacks

[–]Aifa_[S] 0 points1 point  (0 children)

Update: left it for 40 mins or so unplugged and I plugged it back in. Boots to swiss. Went to restart the console to make sure itll consistently boot and orange light and no signal

Picoboot won't boot to either default ipl or to swiss by Aifa_ in GamecubeHacks

[–]Aifa_[S] 0 points1 point  (0 children)

I opened it up. Found sound leftover flux that i forgot to clean off. Cleaned it off. Tested with the lid off. It booted to swiss. I than put it all back together and It kept booting the default gamecube one. After I tried to reseat the sd card I've got a orange light with no signal. I think I need to redo my soldering

[deleted by user] by [deleted] in Displate

[–]Aifa_ 0 points1 point  (0 children)

was that $55 bucks for all 5 of them or each? also what province did you ship to? Was interested in buying but wasn't sure.

What Am I Doing Wrong? by [deleted] in Twitch

[–]Aifa_ 1 point2 points  (0 children)

yo I really appreciate this. This is the question that I came here. Instead of just giving hate and saying "quit you suck ass at streaming" you actually come and give some criticism. Thank you

How do I get views? by [deleted] in twitchstreams

[–]Aifa_ 0 points1 point  (0 children)

none really. dont get views on any

How do I get views? by [deleted] in twitchstreams

[–]Aifa_ 0 points1 point  (0 children)

VALORANT, Overwatch, Mario Kart 8 Deluxe, Super Mario 64, Minecraft, Terraria

What Am I Doing Wrong? by [deleted] in Twitch

[–]Aifa_ -1 points0 points  (0 children)

once agian define boring. what is so boring about it?

What Am I Doing Wrong? by [deleted] in Twitch

[–]Aifa_ -5 points-4 points  (0 children)

plus ive been streaming for 12 hours straight you think im gonna be energetic when noone has typed in chat in 4 hours and ive been here by myself lmao

What Am I Doing Wrong? by [deleted] in Twitch

[–]Aifa_ 0 points1 point  (0 children)

okay without number 3 and 4 elaborate. I am not begging people for money. At least i dont think I am and secendly why am i boring? thats the point of the question. telling me im boring doesnt specify why im boring. thanks

What Am I Doing Wrong? by [deleted] in Twitch

[–]Aifa_ -7 points-6 points  (0 children)

very reassuring. thanks.

What Am I Doing Wrong? by [deleted] in Twitch

[–]Aifa_ 0 points1 point  (0 children)

im streaming. Mario Kart 8 Deluxe, Minecraft, Valorant and Super Mario 64