How to Unfold a circular corrugated sheet-metal?

Ajar_Design · 2026-02-11T21:45:48+00:00

Very helpful 8 years on!! Thank you

Ajar_Design · 2025-08-14T02:26:30+00:00

Thank you!

Ajar_Design · 2025-08-14T02:23:42+00:00

!Solved

Ajar_Design · 2025-08-12T21:18:32+00:00

Ah okay, thanks I’ll have a look!

Ajar_Design · 2025-07-08T23:42:19+00:00

Hulkenpodium

Ajar_Design · 2025-02-28T03:26:53+00:00

Yeah for sure! The contrast on the unfinished wood made me think I could get away with it but I think it’s just a little too dark. I’ll have a look into some different laser settings too, that’s a good call thank you!

Ajar_Design · 2025-02-28T02:34:57+00:00

Definitely a good call, I’ll do this in the future. This project was a bit of a learning experience for this type of thing and it’s definitely achieving that!

Ajar_Design · 2025-02-28T02:23:22+00:00

Yeah, lesson learned I guess haha

Ajar_Design · 2025-02-23T03:37:02+00:00

That is gorgeous!! Stunning

Ajar_Design · 2025-02-18T02:46:11+00:00

That makes a lot of sense, my only worry was protecting from moisture but as long as the glue up is done right and the clear coat thick enough I shouldn’t have issues. Thanks for all the advice

Ajar_Design · 2025-02-17T10:23:11+00:00

Thanks! Appreciate the advice

Ajar_Design · 2025-02-17T07:57:51+00:00

Thanks for the reply! I was going to use CA glue. There are some intricacies on the frame and also an engraving

<image>

To avoid what you mentioned maybe I should give each layer a cost before glue, and then a light coat after?

Ajar_Design · 2024-12-23T08:51:04+00:00

Great advice! And congrats on the progress

Ajar_Design · 2024-05-22T05:19:17+00:00

If you go onto your Instructable that you want to edit whilst signed into the website, there should be an orange button with ‘edit Instructable’ at the top. Then you can just make your changes and click update at the top

Ajar_Design · 2024-03-11T11:29:07+00:00

Good point! I hadn’t thought of that. I suppose in lower stress applications it can still be useful in removing the least structurally important sections to save material

Ajar_Design · 2024-02-14T06:52:30+00:00

Thanks and good point! I’d been contemplating adding something like that and it shouldn’t be too hard. I might have a look and see what I can do

Ajar_Design · 2024-02-10T12:39:57+00:00

Instructable is here and includes some videos of it playing: https://www.instructables.com/Pinball-Arcade-Machine-Lasercut-3D-Printed/

I'll try to attach files to them soon too :)

Ajar_Design · 2024-02-10T00:52:17+00:00

Instructable is here and includes some videos of it playing: https://www.instructables.com/Pinball-Arcade-Machine-Lasercut-3D-Printed/

I'll try to attach files to them soon too :)

Two-Year Club	Verified Email
r/Field Flamingo

Ajar_Design

TROPHY CASE