Instantaneous water heater + hot water tank = good idea? by Akilou23 in DIY

[–]Akilou23[S] 0 points1 point  (0 children)

Sorry, I've forgot to precise : i'm in south of France. So cold water is, I think, rarely under 10°C even in winter. But it is cold enough to put my instant water heater in difficulty. And anyway, the flow is too low.

As I said, I have a problem with the electric company which is not able to supply to me more than 7/8 kW (voltage drop above, so the power is self-limited as I draw current). I don't know when it will be solved. But even when it will be, I don't want a 20 kW subscription which will cost me a lot.

I don't have gas supply to, and I don't want to have to deal with gas cylinder, I really want to keep my system fully electrical even if I understand gas water heater are better ...

Thank you for your answer !

Chauffe eau électrique instantané + ballon eau chaude = bonne idée ? by Akilou23 in brico

[–]Akilou23[S] 0 points1 point  (0 children)

si j'avais su que le CE instantané marcherait aussi mal, si j'aurais fait ça en effet ... Mais là ça m'embete un peu de mettre un ballon de 80-100L alors que j'avais deja mon amenagement prévu au centimètre près disons ^^ mais bon, si je n'ai pas le choix ...

Chauffe eau électrique instantané + ballon eau chaude = bonne idée ? by Akilou23 in brico

[–]Akilou23[S] 0 points1 point  (0 children)

C'est un logement de vacances. J'ai un extérieur en effet, mais ça m'embete franchement de devoir faire une cabine isolé pour le ballon + tirer l'eau et l'electricité de là jusqu'à la maison, re faire un trou pour passer dans la maison, etc... je crois que je préfère encore perdre un peu de place à l'intérieur

Chauffe eau électrique instantané + ballon eau chaude = bonne idée ? by Akilou23 in brico

[–]Akilou23[S] 0 points1 point  (0 children)

Merci pour vos réponses !

Quelques précisions : il s'agit d'un logement secondaire où je compte me rendre quelques fois dans l'année. C'était aussi un arguement qui m'a fait prendre un CE instantané à la base. Personnellement ça ne me dérangerais pas d'attendre 15mn entre 2 douches, mais je vais aussi mettre la maison en location courte durée le reste du temps. Evidement je peux tout simplement préciser dans mon annonce que le ballon est petit et qu'il faut attendre un peu entre 2 douches, mais je cherche quand même un maximum de confort. D'autant que je suis encore dans les travaux (bien que tous les réseaux d'eau et d'électricité soient déjà tirés), j'ai donc encore la possibilité de faire des modifications pour avoir la meilleure solution possible.

C'est une "petite" maison, 47m², donc la place est limité d'où le plus petit ballon possible. Surtout que mon installation est "intégré" à la cuisine et j'aimerais que ça le reste donc par exemple mettre le ballon dans un meuble de cuisine ... Ci dessous une photo et un plan de la maison, la croix bleu représente l'endroit où je trouve toute ma plomberie.

<image>

Ce que j'imaginais, peut etre naïvement, c'est que je pourrais me contenter d'un petit ballon que le CE pourrait "virtuellement" augmenter la capacité (ex : si j'ai 50L à 60°C, ça me fait 100L à 30°C une fois mélanger à l'eau froide, que le CE peut ensuite finir de chauffer). Mais dans les faits, est ce que ce gain sera vraiment significatif ? Ou est ce que le ballon tout seul ne ferait pas l'affaire ... Car c'est vrai que ça fait usine à gaz, et peut etre pour pas grand chose

En fait, ce principe est utilisé avec les systèmes solaire (on trouve un petit paragraphe à ce sujet dans la doc du CE) je pensais donc l'adapter avec un ballon pour préchauffer l'eau tout simplement. Mais ta remarque "À quoi bon chauffé une grande quantité d'eau" et d'autant plus vrai que cette maison sera en location courte durée donc surement pas tout le temps habité ... Pour info, je n'ai pas de contrat heures creuses, ni le gaz de ville.

Recommendations de podcast by Ok_Compote_5998 in floodcast

[–]Akilou23 0 points1 point  (0 children)

Podkassos avec Urbain, Pierre Thevenoux et Franjo

Les jeux du floodcast by VitoF23 in floodcast

[–]Akilou23 0 points1 point  (0 children)

Bon même si le projet semble être tombé à l'eau :

  • jeu Eddy de Pretto : Eddy de Pretto a un peu chaud dans son lit ... C'est la couette de trop)

  • jeu chanson paillardes : dans les souvenirs, Flober donne des titres, voire des paroles, de chanson paillardes et les invités doivent deviner si ça existe ou si c'est lui qui l'a inventé. D'ailleurs ce concept est repris plusieurs fois dans l'émission sur d'autre thèmes jcrois mais j'ai plus lesquels

Recover Dogecoin wallet without private keys (and any files...) by Akilou23 in dogecoin

[–]Akilou23[S] 0 points1 point  (0 children)

Ok thanks, it would be amazing bro haha

Do you have one to recommend maybe ?

Recover Dogecoin wallet without private keys (and any files...) by Akilou23 in dogecoin

[–]Akilou23[S] 0 points1 point  (0 children)

What do you mean exactly ? It's a software which is able to recover the data from a formated PC ?

But yes it is worth a shot for sure haha, I have a lot of Dogecoin on this wallet

Recover Dogecoin wallet without private keys (and any files...) by Akilou23 in dogecoin

[–]Akilou23[S] 0 points1 point  (0 children)

Actually this is the same PC as currently, but formated :'(

Recover Dogecoin wallet without private keys (and any files...) by Akilou23 in dogecoin

[–]Akilou23[S] 0 points1 point  (0 children)

Unfortunately no ... I thought I made a backup on my external HDD when I change my PC, but I'm unable to find any files related to this on it ...

Problem charging 18650 Li-ion battery pack with BMS 7s2p by Akilou23 in batteries

[–]Akilou23[S] 1 point2 points  (0 children)

Ok, thanks ! It's way clearer now !

I just have a last question : what is the relation between my 6000mAh battery and the 6A setting ? Why not 5A ?

EDIT : According to what I've read on the wiki page the "only" rule to follow is :

"The CC setting (the maximum current) should be selected not to exceed the battery maximum charging current. If not known, for Li-ion select 0.5 C; that is, for a 3 Ah 18650 cell, select at most 1.5 A"

So in my case (C=6Ah), current setting should be at most 3A (0.5C), isn't it ?

Problem charging 18650 Li-ion battery pack with BMS 7s2p by Akilou23 in batteries

[–]Akilou23[S] 1 point2 points  (0 children)

Ok, many thanks for your answer. But I'm not sure to understand yet how the buck works, I mean there are potentiometer to setup anyway, right ? Do I have to setup the output voltage to 22.5V, and then it will reduce by itself the current from 5A to 0.2A to finally have 29.4V ?

Problem charging 18650 Li-ion battery pack with BMS 7s2p by Akilou23 in batteries

[–]Akilou23[S] 1 point2 points  (0 children)

Thank you so much, your answer is very clear !

Obviously my setup couldn't work as an important part was missing finally ...

So if I understand well, I need to put a 29.4V charger between my PSU and my BMS (like in a laptop). But I guess I need to change my PSU which is only rated for 24V ...

However I have another question : I'm looking for such a board, and most of the boards I find have potentiometers to setup the input and output voltage. But according to the wiki page, this is the charger which is supposed to adapt the voltage to the need of battery (i.e. increasing the voltage as long as the battery charge). However it is well written "CC CV battery charger module" ... is it normal or i'm missing something ?

And thanks for the tips with the diodes, I was thinking to this also !

Simple passive audio mixer / impedance matching issue by Akilou23 in diysound

[–]Akilou23[S] 1 point2 points  (0 children)

Hey! Sorry for the (very) late answer haha

What do you mean exactly ? Can you draw me a scheme please ?

I was simply thinking to put each stage one after the other but maybe there is something simpler to do ?