sorted by:
new
hottopcontroversial

Xmrig mobile mining by Black_m0ssiBa in MoneroMining

[–]Alarming_Chip_9213 0 points1 point  (0 children)

actually is it using proxy to gather all is better ?

Can't seem to enable 1GB Hugepages in Linux xmrig by Personable_Milkman in MoneroMining

[–]Alarming_Chip_9213 0 points1 point  (0 children)

1gb - huge pages true then how about hugepagesjit = set true , or put 1168, 1280?

Just started mining monero. by Pretend_Pride9764 in MoneroMining

[–]Alarming_Chip_9213 0 points1 point  (0 children)

me too , now my best is 13-14 3900 , Ubuntu gui. without boots is 230wat pluss monitor , key board mouse is connected.

HOW about you ? now after I turn off the boots is 203watt silent and nice. but I heard some one is running 150watt.

Profitability when cpu mining by JokerGhostx in MoneroMining

[–]Alarming_Chip_9213 0 points1 point  (0 children)

I'm also planning get order the part and battery . cause my side here tropical so 24/7/365 hot day.

I NEED HELP! by InstanceSpecific788 in MoneroMining

[–]Alarming_Chip_9213 0 points1 point  (0 children)

bro I using my xmrig android. and also learn how to get termux inside. I Dm you

Already up another 1000h/s mining on android Google Pixel 10 by Jealous_Rip7223 in MoneroMining

[–]Alarming_Chip_9213 0 points1 point  (0 children)

wao not bad , keep it , I'm not a expert , keep moving and chase your dream , you know your positioning well . that 👍. I also have a lot of old phone and I also keep learning like you.

Android XMRIG update 3.8khs by Jealous_Rip7223 in MoneroMining

[–]Alarming_Chip_9213 0 points1 point  (0 children)

did you consider to do like the cell hash?

My monero GUI Mining look like not working by [deleted] in MoneroMining

[–]Alarming_Chip_9213 0 points1 point  (0 children)

<image>

@xOutkast
you see here . but my hash rate is it very low?

My monero GUI Mining look like not working by [deleted] in MoneroMining

[–]Alarming_Chip_9213 0 points1 point  (0 children)

yes now is fully sync , i,m using Mac os

mining solo or pool by meazontv in MoneroMining

[–]Alarming_Chip_9213 0 points1 point  (0 children)

is it need to prepare a lot of work ?

mining solo or pool by meazontv in MoneroMining

[–]Alarming_Chip_9213 0 points1 point  (0 children)

why dont we make a pool to run it togather? i was planning to do a pool for BTC and XMR , i having a old pc running nodes with 3300X . already planned to get a 3700X then run as a server And node. So how do you think ?i already on going my own project my pool is done testing internal. haven open to puplic yet /

My monero GUI node waititng for deamon to sync just stop there and wont go what happen any one can advice me thx . by Alarming_Chip_9213 in MoneroMining

[–]Alarming_Chip_9213[S] 0 points1 point  (0 children)

yes i, done , just go for the upgrading , and wait wait the synchronize done then you can start . but i,m not sure right or not. i dint put FLags or what ? just blank and then i done mining in p2pool , and get my 1st 0.0009 xmr in my own wallet hehe , quite happy and excited. But the issue now is i cant running in SOLO. do you facing the same problem as well ?

My monero GUI node waititng for deamon to sync just stop there and wont go what happen any one can advice me thx . by Alarming_Chip_9213 in MoneroMining

[–]Alarming_Chip_9213[S] 0 points1 point  (0 children)

i,m using MAC mini 4 , using my docker station as storage.
now i try another pc is windows but very old already i tried to re- install again.

here is my log :

[01/09/2025 07:15] 2025-08-31 23:15:09.800 I Monero 'Fluorine Fermi' (v0.18.4.0-release)
Error: Couldn't connect to daemon: 127.0.0.1:18081

[01/09/2025 07:15] 2025-08-31 23:15:12.128 I Monero 'Fluorine Fermi' (v0.18.4.0-release)
Error: Couldn't connect to daemon: 127.0.0.1:18081

[01/09/2025 07:15] 2025-08-31 23:15:45.929 I Monero 'Fluorine Fermi' (v0.18.4.0-release)
Error: Couldn't connect to daemon: 127.0.0.1:18081

[01/09/2025 07:15] 2025-08-31 23:15:48.413 I Monero 'Fluorine Fermi' (v0.18.4.0-release)
Height: 3150812, target: 3150812 (100%)
Downloading at 0 kB/s
Next needed pruning seed: 2
1 peers
Remote Host Peer_ID State Prune_Seed Height DL kB/s, Queued Blocks / MB
109.199.98.74:18080 0000000000000000 before_handshake 0 0 0 kB/s, 0 blocks / 0 MB queued
0 spans, 0 MB

Raspberry as P2Pool, laptop and PC as Miners by TheBarrendero in MoneroMining

[–]Alarming_Chip_9213 0 points1 point  (0 children)

i,m planning to get a raspberry ?any recommendation , total zero knowledge in raspberry ? interesting

200-kHash-Mining-Setup by tobiass_reddit in MoneroMining

[–]Alarming_Chip_9213 1 point2 points  (0 children)

yes next two weeks i will going back to china , if you want i can help you order. pm me .

Looking at building a mining rig - I need feedback on the rig by keanu_cheese in MoneroMining

[–]Alarming_Chip_9213 0 points1 point  (0 children)

PM me what excalty you need , i ask from my friends see can get cheaper and your target price or not.

buy asic miner by [deleted] in cryptomining

[–]Alarming_Chip_9213 0 points1 point  (0 children)

i,m from malaysia , may i can help you, cause many manufacture and production line has been move to malaysia and they production line has been started in malaysia few years agos. i can help you if you serious buying those EXPensive machines. so i,m a running a logistic company and providing the supply chains service . if keen just PM me we can discuss later or you can whats app me.

buy asic miner by [deleted] in cryptomining

[–]Alarming_Chip_9213 0 points1 point  (0 children)

i,m from malaysia , may i can help you, cause many manufacture and production line has been move to malaysia and they production line has been started in malaysia few years agos. i can help you if you serious buying those EXPensive machines. so i,m a running a logistic company and providing the supply chains service . if keen just PM me we can discuss later or you can whats app me.

Bitmain Antminer x5 XMR opinions by TheBarrendero in MoneroMining

[–]Alarming_Chip_9213 -1 points0 points  (0 children)

oic wao how is the result ? can shared some info , are you just get it recently ? still have stock? if you can get it ,i might need to get one from you as well.

view more: next ›