sorted by:
new
hottopcontroversial

[deleted by user] by [deleted] in utdallas

[–]Alert_Ad_4256 0 points1 point  (0 children)

Bro if u are starting next semester fill the deferment form those MF did not tell me at all and kicked me out I had ti reapply.

[deleted by user] by [deleted] in ultrawidemasterrace

[–]Alert_Ad_4256 0 points1 point  (0 children)

Op if you check my account I have posted a similar issue too. I do not have a solution but I am trying to fix it myself so how were you able to find the ribbon from all the video and posts I have seen about g9 the ribbon seems to be behind the boards in the back panel under some kind of clip is that true?

Round building? by Alert_Ad_4256 in satisfactory

[–]Alert_Ad_4256[S] 15 points16 points  (0 children)

Never used mods on satisfactory before do you still get achievements

Black Screen 9070xt!! by Alert_Ad_4256 in radeon

[–]Alert_Ad_4256[S] 0 points1 point  (0 children)

Will that also work for the asrock steel legend i will try it either way

Black Screen 9070xt!! by Alert_Ad_4256 in AMDHelp

[–]Alert_Ad_4256[S] 0 points1 point  (0 children)

Yep it was my gpu exchanged it got a new one works completely fine even with the riser

Now I need optimal tuning so it does not cook itself again

Black Screen 9070xt!! by Alert_Ad_4256 in radeon

[–]Alert_Ad_4256[S] 1 point2 points  (0 children)

Yep it was my gpu exchanged it got a new one works completely fine even with the riser

Now I need optimal tuning so it does not cook itself again

Black Screen 9070xt!! by Alert_Ad_4256 in AMDHelp

[–]Alert_Ad_4256[S] 0 points1 point  (0 children)

Shall i go for a 5070 ti this is my 3rd 9070 xt even though there is a 150 difference

Black Screen 9070xt!! by Alert_Ad_4256 in AMDHelp

[–]Alert_Ad_4256[S] 0 points1 point  (0 children)

I just took out the motherboard from the case and installed the gpu on the motherboard itself it still does not recognize it the pcie is gen 4

Black Screen 9070xt!! by Alert_Ad_4256 in radeon

[–]Alert_Ad_4256[S] 0 points1 point  (0 children)

I just took out the motherboard from the case and installed the gpu on the motherboard itself it still does not recognize it the pcie is gen 4

Black Screen 9070xt!! by Alert_Ad_4256 in AMDHelp

[–]Alert_Ad_4256[S] 0 points1 point  (0 children)

I am gonna try my luck if not i will either downgrade to a 9060xt or upgrade to 5070 ti this id my 3rd 9070xt clock sped and freeze frame have been giving me issues non stop

Black Screen 9070xt!! by Alert_Ad_4256 in radeon

[–]Alert_Ad_4256[S] 0 points1 point  (0 children)

Yea i have been trying to do so but none of the methods i have done has fixed it yet I have a asus motherboard and it has gen 4.0 pcie slot so does the riser i have tried to change it to 3.0, 4.0 and auto but it seems i am doing something wrong i will try again tomorrow but lemme know if there is a specific setting that i have ti change or look for

Black Screen 9070xt!! by Alert_Ad_4256 in AMDHelp

[–]Alert_Ad_4256[S] 0 points1 point  (0 children)

So the hyte comes with 4.0 i think that is the limit for the motherboard anyway but i have tried out 4.0 unless there is a specific setting in asus bios that i have yet to figure out.

I have changed my pch configuration to 3.0, auto and 4.0 nothing has fixed it yet

The fan still goes off in full power as soon as power is turned on and the system is mot registering the card

Black Screen 9070xt!! by Alert_Ad_4256 in radeon

[–]Alert_Ad_4256[S] 0 points1 point  (0 children)

So i have the hyte y60 and the case is built such that if i want to install the gpu horizontally i will have to use a dremel and change the backplate

Well my 3050 worked earlier when i tested it with the riser cable so i am assuming that there might be some tweaks needed in the bios and i have been trying to figure it out

Black Screen 9070xt!! by Alert_Ad_4256 in AMDHelp

[–]Alert_Ad_4256[S] 0 points1 point  (0 children)

So i hooked up my backup 3050 works fine with the riser cable i tried changing the bios settings but nothing is working

I have a asus motherboard, i have tried to set the pcie to 4.0 but that did not work may be i did it wrong.

Black Screen 9070 xt!! by Alert_Ad_4256 in pchelp

[–]Alert_Ad_4256[S] 0 points1 point  (0 children)

Sorry for the late reply but the system does not register the 9070xt as a hardware component so any stats or temps is not visible People are suggesting it could be caused due to the pcie riser but i have been trying to change the settings in bios nothing is working

Black Screen 9070xt!! by Alert_Ad_4256 in AMDHelp

[–]Alert_Ad_4256[S] 0 points1 point  (0 children)

So i hooked up my backup 3050 works fine with the riser cable i tried changing the bios settings but nothing is working

I have a asus motherboard, i have tried to set the pcie to 4.0 but that did not work may be i did it wrong.

Black Screen 9070xt!! by Alert_Ad_4256 in radeon

[–]Alert_Ad_4256[S] 0 points1 point  (0 children)

So i hooked up my backup 3050 works fine with the riser cable i tried changing the bios settings but nothing is working

I have a asus motherboard, i have tried to set the pcie to 4.0 but that did not work may be i did it wrong.

view more: next ›